Single hole, single outlet (swivel) combination tap assembly, (brass body - various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304051

Size:

Stainless steel braided (PEX) lined flexible hose assemblies with 3/8" BSP captive nut end connections.

Marking:

Hansgrohe on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

31 087 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass body), incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304302

Size:

Polyamide braided PEX lined flexible hose assemblies with 3/8” BSP captive nut end connections.

Marking:

Grohe on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

33.975.002 Eurostyle Cosmopolitan

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Country

Germany

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304303

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Grohe on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

Minta range: 32.917.xxx, 32.488.xxx Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DL0 – Brushed warm sunset DA0 – Warm sunset AL0 – Brushed hard graphite A00 – Hard graphite KS0 – Velvet black Models added May 2023: Vento range: 30.427.xxx, 30.429.xxx.

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Country

Germany

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies -various finishes), incorporating ceramic cartridge headworks and single lever operating members. The Spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see list). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304315

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

Rebris S range: 72 510 xxx with pop-up waste set 72 513 xxx with pop-up waste set 72 514 xxx without waste set 72 517 xxx with pop-up waste set 72 519 xxx with pop-up waste set 72 520 xxx without waste set 72 527 xxx with metal pop-up waste set 72 580 xxx with pop-up waste set 72 582 xxx without waste set 72 584 xxx with metal pop-up waste set 72 586 xxx with pop-up waste set 72 588 xxx with pop up waste set 72 590 xxx with pop-up waste set Rebris E range: 72 550 xxx with pop-up waste set 72 551 xxx with metal pop-up waste set 72 553 xxx with pop-up waste set 72 554 xxx without waste set 72 557 xxx with pop-up waste set 72 559 xxx with pop-up waste set 72 560 xxx without waste set 72 581 xxx with pop-up waste set 72 583 xxx without waste set 72 585 xxx with metal pop-up waste set 72 587 xxx with pop-up waste set 72 589 xxx with pop up waste set 72 591 xxx with pop-up waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single-outlet (swivel) combination tap assemblies, incorporating a ceramic cartridge headworks with a single lever operating member. A quatrer turn ceramic disc headwork with spring loaded return to the closed position controls flow of the boiling water outlet supply using single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar on the hot and cold supply, 3.0 bar on the boiling water supply. Maximum operating temperature 65°C on the hot and cold supply, 99°C on the boiling water supply.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304316

Size:

Stainless-steel braided EPDM lned flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

Xindong logo on operating member.

Installation Requirements:

R001 R006 R009

Expiry date:

30/04/2028

Model:

T1022 & T1022A

Approval Holder:

Zhejiang Xindong Sanitary Ware Co.,Ltd

Company Name

Zhejiang Xindong Sanitary Ware Co.,Ltd

Address

Xuanmen Industrial Zone Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies, (chrome plated brass bodies), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304328

Size:

Stainless steel braided EPDM lined flexible hoses with ½”BSP (M) end connection.

Marking:

SMR on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2028

Model:

ALTHIA SINGLE LEVER SWAN, ALTHIA SINGLE LEVER QUAD, GLOBE SINGLE LEVER.

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road

Postcode

S75 1HT

Country

Barnsley

Phone

01226 283434

General Email

pillingworth@abodedesigns.co.uk

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

Country

Italy

General Email

View All Listings by this Company

Range of wall mounted, concealed, three-hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304903

Size:

22mm Compression

Marking:

Bristan on spout

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2028

Model:

DSC WMBF C & 225909

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with under counter boiling water unit (vented via the spout outlet) and in-line water filter (on instantaneous hot water supply only). Flow is controlled by a ceramic cartridge headwork with a single lever operating member. Instantaneous hot water is controlled by a self-closing quarter turn ceramic disc headwork with a single lever operating member. The product is supplied with loose 3/8” x 15mm reducers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.6 bar. Maximum operating temperature 98°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304910

Size:

Mains hot and cold water connections: Stainless steel braided silicone lined flexible hose assemblies with ½” captive nut end connections. Size added January 2019: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections. Water filter inlet: 10mm LLDPE tubing

Marking:

Insinkerator logo on body

Installation Requirements:

R001 R006 R009 R010 R170

Expiry date:

30/04/2028

Proviso:

The single check valve supplied with this product must be installed to maintain the validity of the WRAS approval.

Model:

Insinkerator 3N1 Range: L-spout models: F-H3N1-C-1 (Chrome) - Product No. 44837, F-H3N1-W-1 (White) - Product No. 44837A, F-H3N1-BR-1 (brushed Nickel) - Product No. 44837B, F-H3N1-ORG-1 (Orange) - Product No. 44837AL, F-H3N1-NS-1 (Natural Stone) - Product No. 44837AM, F-H3N1-JB-1 (Jet black) - Product No. 44837AP, F-H3N1-G-1 (Gold) - Product No. 44837AS F-H3N1-AN-1 (Anthracite) - Product No. 44837AN. F-H3N1-BV-1 (Black velvet) - Product No. 44837AW. J-spout models: F-H3N1J-C-1 (Chrome) - Product No. 45097 F-H3N1J-BR-1 (Brushed Nickel) - Product No. 45097B. F-H3N1J-RG (Rose Gold) - Product No. 45097AT-ISE. F-H3N1J-BV-1 (Black Velvet) - Product No. 45097AW Tank and filter NXTF-1 - Product No. 44900 All taps to be installed with the tank and filter assembly

Approval Holder:

InSinkErator

Company Name

InSinkErator

Address

4700 21st Street, Racine, WI 53406-5093

Country

USA

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304012

Size:

Stainless steel braided PEX lined hose with 3/8" BSP captive nut end connections.

Marking:

GAOAO on body

Installation Requirements:

R001 R009 R010 R040

Expiry date:

30/04/2028

Model:

Model: ZA3833(ZA3833-G) ZA3833YB(ZA3833YB-G) ZA3833CS(ZA3833CS-G) Surface: CS:Stainless steel YB:Matte Graphite TB:Titanium LT:Brushed Brass PVD LR:Brushed copper None/CP:Chrome Other codes： -G: holistic handle -S: handle of rod connected cap

Approval Holder:

Zhejiang Gaoao Sanitary Ware Co. Ltd.

Company Name

Zhejiang Gaoao Sanitary Ware Co. Ltd.

Address

No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

Country

China

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), with a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305008

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections

Marking:

AXOR on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/05/2028

Model:

10 822 xxx Single lever kitchen mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass bodies) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305065

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

Schock on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/05/2028

Model:

556000CHR/UK Kitchen Mixer 555000CHR/UK Kitchen Mixer 554000CHR/UK Kitchen Mixer

Approval Holder:

Schock GmbH

Company Name

Schock GmbH

Address

Hofbauerstraße 1 94209 Regen GERMANY

View All Listings by this Company

Manufacturer:

Schock GmbH

Company Name

Schock GmbH

Address

Hofbauerstraße 1 94209 Regen GERMANY

View All Listings by this Company

Single-hole, single outlet, (swivel), combination tap assembly, (chrome plated brass body) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The inlets incorporate screwdriver operated isolation valves incorporating approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307900

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections x 15mm compression.

Marking:

Bristan on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2028

Model:

PM SNK C

Product Images

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly, (chrome plated brass body) incorporating ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 4 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305334

Size:

Stainless-steel braided PEX lined fleixible hose assemblies with stainless steel strainer and 3/8” BSP captive nut end connections

Marking:

HAN YUN HARDWARE on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/05/2028

Model:

5059340453903

Approval Holder:

ZHEJIANG HANYUN HARDWARE CO., LTD.

Company Name

ZHEJIANG HANYUN HARDWARE CO., LTD.

Address

NO. 51, KAIYUAN ROAD DONGHUA SUB- DISTRICT LONGYOU COUNTY, QUZHOU, ZHEJIANG

Postcode

ZIP: 324400

Country

China

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies, (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar Maximum operating temperature 70.0°C

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304071

Size:

Stainless steel braided PEX lined flexible hose assemblies with 3/8" BSP captive nut end connections.

Marking:

Axor on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

16 517 xxx Single lever basin mixer 16 518 xxx Single lever basin mixer

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004367

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression end connections.

Marking:

SMR on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2025

Model:

ZENO

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Country

United Kingdom

Phone

0161 4360280

View All Listings by this Company

Manufacturer:

San Marco Rubinetteria Srl

Company Name

San Marco Rubinetteria Srl

Address

Via Carducci 10 13867 Pray Biellese (Biella)

Country

Italy

Phone

+39 15765 5244

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic headwork with single lever operating members. The products incorporate a connection for filtered water supply controlled by quarter turn ceramic disc headwork. The spout outlets incorporate plastic aerator. A separate supply for Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2306315

Size:

PEX lined stainless steel braided flexible hoses with ½” BSP captive nut end connections.

Marking:

ABI on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2028

Model:

T16005-* * available with codes below, represent different surface treatment: *=021, PVD Brass, *=019, PVD Copper, *=020, PVD Gunmetal, *=018, Satin, *=023, PVD Matte black, *=026, Painting White.

Approval Holder:

ABI INTERIORS PTY LTD

Company Name

ABI INTERIORS PTY LTD

Address

316 DESIGN CENTRE EAST LONDON

Postcode

SW10 0XE

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 Bar.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2306013

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Omasa on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2028

Model:

M202075

Approval Holder:

KAIPING OMASA SANITARY WARE INDUSTRY CO., LTD

Company Name

KAIPING OMASA SANITARY WARE INDUSTRY CO., LTD

Address

NO.65 LONGTANG XI RD. SHUIKOU TOWN, KAIPING CITY GUANGDONG,CHINA

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2306036

Size:

Stainless steel braided, EPDM lined flexible hose assemblies with a ½” BSP captive nut end connections.

Marking:

Hill logo and company name on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2028

Model:

T813006A-ORB (Matte black) Models added January 2024: T813006A (Chrome) T812006A-N (Brushed Nickel)

Approval Holder:

Hill Partnerships Ltd.

Company Name

Hill Partnerships Ltd.

Address

The Power House, Gunpowder Mill, Powdermill Lane, Waltham Abbey, Essex EN9 1BN, United Kingdom

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2306037

Size:

Stainless steel braided, PEX lined flexible hose assemblies with 3/8" BSP (F) captive nut end connections.

Marking:

Hansgrohe on body

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

31 817 xx0 here xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2306051

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating 1/2" BSP (F) captive nut end connections`

Marking:

Kludi Rak on operating member

Installation Requirements:

R001 R006 R010 R009

Expiry date:

30/06/2028

Model:

RAK10050

Approval Holder:

KLUDI RAK L.L.C

Company Name

KLUDI RAK L.L.C

Address

Ras Al Khaimak, PO BOX-6679

Phone

+97172447759

View All Listings by this Company

Manufacturer:

KLUDI RAK L.L.C

Company Name

KLUDI RAK L.L.C

Address

Ras Al Khaimak, PO BOX-6679

Phone

+97172447759

View All Listings by this Company