Range of plastic push-fit fittings (available in black, white and grey) and a manifold (available in grey only) with EPDM or NBR ‘O’-rings. For use with copper pipe (manufactured to EN1057), PE-X pipe (manufactured to BS7291-3:2010) & PB pipe (BS EN 21003-2:2008). Maximum working pressure: 12.5 bar @ 20°C (Cold water use only). From September 2023 the products are suitable for 8.0 bar @ 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303062

Size:

See models.

Marking:

JG logo and size moulded on the collet or body of fitting.

Installation Requirements:

R001 R008

Expiry date:

31/03/2028

Model:

GREY ACETAL FITTINGS COOLING MANIFOLD: NC2183 15mm x 3/8”. METRIC TO IMPERIAL ADAPTORS STRAIGHT CONNECTOR: NC462 15mm x ½”. UNEQUAL STRAIGHT CONNECTOR: NC2511 15mm x 3/8”. STEM TO TUBE ADAPTOR: NC2164 15mm x 3/8”, NC2173 15mm x ½”. STEM TO HOSE CONNECTOR: NC932 15mm x ½”. TUBE TO HOSE CONNECTOR: NC448 15mm x ½”, NC737 22mm x ½”, NC473 22mm x ¾”. ADAPTOR TEE: NC869 15mm x 15mm x 3/8”. STEM TO STEM ADAPTOR: NC478 15mm x 3/8”. ACETAL CM FITTINGS WITH EPDM O-RINGS FEMALE ADAPTOR WITH BSP THREAD: CM451513FS 15mm x 3/8”. TAP ADAPTOR WITH UNS THREAD: CM3210U7E 10mm x 7/16”. TAP ADAPTOR BSP THREAD: CM321014E 10mm x ½” BSP (F), CM3201S 15mm x ½” BSP (F). TAP ADAPTOR FLAT END BSP THREAD: CM321014FE 10mm x ½” BSP (F). TWO-WAY DIVIDER: CM2315W 15mm. STRAIGHT ADAPTOR BSP THREAD: CM011514S 15mm x ½” (M), CM011216S 22mm x ¾” (M). REDUCING STRAIGHT CONNECTOR: CM201510S 15mm x 10mm, CM201512W 15mm x 12mm. REDUCING ELBOW CONNECTOR: CM211210W 12mm x 10mm. SLIP CONNECTOR: CM-SC-15-S 15mm. STEM ELBOW: CM221515W 15mm x 15mm. BLACK ACETAL FITTINGS (METRIC SIZES) STRAIGHT ADAPTORS BSP THREAD: PM011012E 10mm x ¼” BSP (M), PM011013E 10mm x 3/8” BSP (M), PM011014E 10mm x ½” BSP (M), PM011513E 15mm x 3/8” BSP (M), PM011514E 15mm x ½” BSP (M), PM011516E 15mm x ¾” BSP (M), PM012216E 22mm x ¾” BSP (M). STRAIGHT ADAPTERS BSPT THREAD: PM011002E 10mm x ¼” BSPT (M), PM011003E 10mm x 3/8” BSPT (M), PM011004E 10mm x ½” BSPT (M). EQUAL STRAIGHT CONNECTORS: PM0410E 10mm, PM0415E 15mm, PM0422E 22mm. REDUCING STRAIGHT CONNECTORS: PM201004E 10mm x 4mm, PM201006E 10mm x 6mm, PM201008E 10mm x 8mm, PM201210E 12mm x 10mm. EQUAL ELBOW: PM0310E 10mm, PM0315E 15mm, PM0322E 22mm. REDUCING ELBOW CONNECTOR: PM211004E 10mm x 4mm, PM211006E 10mm x 6mm, PM211008E 10mm x 8mm, PM211210E 12mm x 10mm. STEM ELBOW: PM221010E 10mm x 10mm, PM221515E 15mm x 15mm, PM222222E 22mm x 22mm. SWIVEL ELBOW BSP THREAD: PM091012E 10mm x ¼”, PM091013E 10mm x 3/8”, PM091014E 10mm x ½”. SWIVEL ELBOW BSPT THREAD: PM091002E 10mm x ¼”, PM091003E 10mm x 3/8”, PM091004E 10mm x ½”. EQUAL TEE: PM0210E 10MM, PM0215E 15mm, PM0222E 22mm. REDUCING TEE: PM3022AE 22mm x 22mm x 15mm. SWIVEL TEE CENTRE LEG BSP THREAD: PM101012E 10mm x ¼”, PM101013E 10mm x 3/8”, PM101014E 10mm x ½”. SWIVEL TEE CENTRE LEG BSPT THREAD: PM101002E 10mm x ¼“, PM101003E 10mm x 3/8“, PM101004E 10mm x ½“. SWIVEL MALE RUN TEE BSP THREAD: PM111012E 10mm x ¼”, PM111013E 10mm x 3/8”, PM111014E 10mm x ½”. SWIVEL MALE RUN TEE BSPT THREAD: PM111002E 10mm x ¼“, PM111003E 10mm x 3/8“, PM111004E 10mm x ½“. BULKHEAD CONNECTOR: PM1210E 10mm, REDUCER: PM061210E 12mm x 10mm, PM061510E 15mm x 10mm, PM061512E 15mm x 12mm, PM061815E 18mm x 15mm, PM062215E 22mm x 15mm, PM062218E 22mm x 18mm. STEM ADAPTOR BSP THREAD: PM051012E 10mm x ¼” BSP (M), PM051013E 10mm x 3/8” BSP (M), PM051014E 10mm x ½” BSP (M), PM051513E 15mm x 3/8” BSP (M), PM051514E 15mm x ½” BSP (M), PM052214E 22mm x ½” BSP (M), PM052216E 22mm x ¾ ” BSP (M). STEM ADAPTOR BSPT THREAD: PM051002E 10mm x ¼” BSPT (M), PM051003E 10mm x 3/8” BSPT (M), PM051004E 10mm x ½” BSPT (M). TWO WAY DIVIDER: PM2310E 10mm, PM2315E 15mm. PLUG (RED & BLACK): PM0810R 10MM RED, PM0815E 15MM BLACK, PM0822E 22MM BLACK. END STOP: PM4615E 15mm, PM4622E 22mm. FEMALES ADAPTOR BSP THREAD: PM451015FE 10mm x 5/8”. U-BEND: PMUB15E 15mm. BACK PLATE ELBOW: 15PWB 15mm x ½” BSP. WHITE ACETAL FITTINGS BULKHEAD ELBOW: CM551516W 15mm x ¾” BSP.

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of compression fittings with brass bodies for use with copper pipe (EN1057). Above ground use only. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2305343

Size:

see model

Marking:

EN1254-2 & size on nut. HonSon logo (ISI) on fitting body

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

HS100-001 Equal Straight: HS100-001-01 8×8, HS100-001-02 10×10, HS100-001-03 12×12, HS100-001-04 14×14, HS100-001-05 15×15, HS100-001-06 16×16, HS100-001-07 18×18, HS100-001-08 22×22, HS100-001-09 28×28, HS100-001-13 15×15 (82mm length), HS100-001-14 22×22 (82mm length). HS100-002 Reducing Straight: HS100-002-01 10×8, HS100-002-02 12×8, HS100-002-03 12×10, HS100-002-04 15×8, HS100-002-05 15×10, HS100-002-06 15×12, HS100-002-07 18×15, HS100-002-08 22×15, HS100-002-09 22×18, HS100-002-10 28×15, HS100-002-11 28×22. HS100-003 Female Straight: HS100-003-01 8×1/4" F, HS100-003-02 8×3/8" F, HS100-003-03 10×1/4" F, HS100-003-04 10×3/8" F, HS100-003-05 10×1/2" F, HS100-003-06 12×3/8" F, HS100-003-07 12×1/2" F, HS100-003-08 14×3/8" F, HS100-003-09 14×1/2" F, HS100-003-10 15×1/4" F, HS100-003-11 15×3/8" F, HS100-003-12 15×1/2" F, HS100-003-13 15×3/4" F, HS100-003-14 15×1" F, HS100-003-15 16×1/2"F, HS100-003-16 16×3/4" F, HS100-003-17 18×1/2" F, HS100-003-18 18×3/4" F, HS100-003-19 22×1/2" F, HS100-003-20 22×3/4" F, HS100-003-21 22×1" F, HS100-003-22 28×3/4" F, HS100-003-23 28×1" F. HS100-004 Male Straight: HS100-004-01 8×1/8"M, HS100-004-02 8×1/4"M, HS100-004-03 8×3/8"M, HS100-004-04 8×1/2"M, HS100-004-05 10×1/4"M, HS100-004-06 10×3/8"M, HS100-004-07 10×1/2"M, HS100-004-08 12×3/8"M, HS100-004-09 12×1/2"M, HS100-004-10 14×3/8"M, HS100-004-11 14×1/2"M, HS100-004-12 14×3/4"M, HS100-004-13 15×1/4"M, HS100-004-14 15×3/8"M, HS100-004-15 15×1/2"M, HS100-004-16 15×3/4"M, HS100-004-17 16×1/2"M, HS100-004-18 16×3/4"M, HS100-004-19 18×1/2"M, HS100-004-20 18×3/4"M, HS100-004-21 22×1/2"M, HS100-004-22 22×3/4"M, HS100-004-23 22×1"M, HS100-004-24 22×1 1/4"M, HS100-004-25 28×3/4"M, HS100-004-26 28×1"M. HS100-005 Equal Elbow HS100-005-01 8×8, HS100-005-02 10×10, HS100-005-03 12×12, HS100-005-04 14×14, HS100-005-05 15×15, HS100-005-06 16×16, HS100-005-07 18×18, HS100-005-09 22×22, HS100-005-11 28×28. HS100-006 Female Elbow: HS100-006-01 8×1/4"F, HS100-006-02 10×3/8"F, HS100-006-03 12×1/2"F, HS100-006-04 14×1/2"F, HS100-006-05 15×1/2"F, HS100-006-06 15×3/4"F, HS100-006-07 16×1/2"F, HS100-006-08 18×1/2"F, HS100-006-09 18×3/4"F, HS100-006-10 22×1/2"F, HS100-006-11 22×3/4"F, HS100-006-12 22×1"F, HS100-006-13 28×1"F. HS100-007 Male Elbow: HS100-007-01 8×1/4"M, HS100-007-02 10×1/4"M, HS100-007-03 10×3/8"M, HS100-007-04 12×1/2"M, HS100-007-05 14×1/2"M, HS100-007-06 15×1/4"M, HS100-007-07 15×3/8"M, HS100-007-08 15×1/2"M, HS100-007-09 15×3/4"M, HS100-007-10 16×1/2"M, HS100-007-11 18×1/2"M, HS100-007-12 18×3/4"M, HS100-007-13 22×1/2"M, HS100-007-14 22×3/4"M, HS100-007-15 22×1"M, HS100-007-16 28×1"M. HS100-008 Equal Tee: HS100-008-01 8×8×8, HS100-008-02 10×10×10, HS100-008-03 12×12×12, HS100-008-04 14×14×14, HS100-008-05 15×15×15, HS100-008-06 16×16×16, HS100-008-07 18×18×18, HS100-008-08 22×22×22, HS100-008-09 28×28×28. HS100-009 Reducing Tee: HS100-009-01 15×15×22, HS100-009-02 18×18×15, HS100-009-03 18×15×18, HS100-009-04 22×15×15, HS100-009-05 22×15×22, HS100-009-06 22×22×15, HS100-009-07 22×22×18, HS100-009-08 28×22×15, HS100-009-09 28×28×15, HS100-009-10 28×15×28, HS100-009-11 28×22×22, HS100-009-12 28×28×22, HS100-009-13 28×22×28. HS100-010 Female Tee: HS100-010-01 12×1/2“F, HS100-010-03 15×1/2“F, HS100-010-05 18×1/2“F, HS100-010-06 18×3/4“F, HS100-010-07 22×1/2”F, HS100-010-08 22×3/4”F, HS100-010-09 28×1/2”F, HS100-010-10 28×3/4”F, HS100-010-11 28×1”F. HS100-011 Wallplate Elbow: HS100-011-01 12×1/2"F, HS100-011-02 14×1/2"F, HS100-011-03 15×1/2"F, HS100-011-05 18×1/2"F, HS100-011-06 18×3/4"F, HS100-011-07 22×1/2"F, HS100-011-08 22×3/4"F. HS100-012 Water Tank Connector : HS100-012-01 15, HS100-012-02 22, HS100-012-03 28. HS100-013 Stop End: HS100-013-01 8, HS100-013-02 10, HS100-013-03 12, HS100-013-04 15, HS100-013-05 18, HS100-013-06 22, HS100-013-07 28. HS100-014 Str Tap Connector: HS100-014-01 15×1/2"F, HS100-014-02 15×3/4"F, HS100-014-03 22×3/4"F. HS100-015 Bent Tap Connector: HS100-015-01 15×1/2"F, HS100-015-02 22×3/4"F. HS100-016 Crossover Bridge: HS100-016-01 15×15, HS100-016-02 18×18, HS100-016-03 22×22. HS100-017 Reduced Riece: HS100-017-01 15×8, HS100-017-02 15×10, HS100-017-03 22×15, HS100-017-04 28×15, HS100-017-05 28×22. HS100-018 3 Part Reduced Set: HS100-018-01 10×8, HS100-018-02 12×8, HS100-018-03 15×8, HS100-018-04 15×10, HS100-018-05 15×12, HS100-018-06 22×15, HS100-018-07 28×15, HS100-018-08 28×22. HS100-019 Water Tank Connector: HS100-019-01 15×1/2"M, HS100-019-02 22×3/4"M, HS100-019-03 28×1"M. HS100-020 45 Degree Elbow: HS100-020-01 15×15, HS100-020-02 22×22, HS100-020-03 28×28.

Approval Holder:

Wenling Honson Brassware Co Ltd

Company Name

Wenling Honson Brassware Co Ltd

Address

Yingtian Industrial Zone, Cheng-nan Town, Wenling City

Country

Zhejiang Province,

View All Listings by this Company

Manufacturer:

Wenling Honson Brassware Co Ltd

Company Name

Wenling Honson Brassware Co Ltd

Address

Yingtian Industrial Zone, Cheng-nan Town, Wenling City

Country

Zhejiang Province,

View All Listings by this Company

Range of “Effast” ABS fittings for use with ABS pipe complying with BS EN 5391-2006. Maximum working pressure: 15 Bar. Maximum operating temperature: 23°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2306055

Size:

20, 25, 32, 40, 50, 63, 75, 90 OR 110mm solvent weld (SW) connection (Model codes with XXXX is replaced with 0200 for 20mm, or 1100 for 110mm SW etc.) ½”, ¾”, 1”, 1.1/4”, 1.1/2”, 2”, 3” or 4” BSP (M) or (F) connections. (Model codes with a Y on the end is replaced with B for ½”, C for ¾”, D for 1”, E for 1.1/4”, F for 1.1/2”, G for 2”, H for 3” and I for 4” BSP).

Marking:

Effast and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

RAAGOAXXXX - Elbow 90° BS (20-110 SW), RAAGYAXXXX - Elbow 45° BS (20-110 SW), RAAMAAXXXX - Socket BS (20-110 SW), RAATIAXXXX - tee 90° BS (20-110 SW), RAACAAXXXX - Cap BS (25-110 SW), RAACUAXXXX - Bend 90° (25-110 SW,) RAABOAXXXX - Union BS (20-110 SW), RAAQRAXXXX - Serrated Face Stub Flange (32-110 SW), RAAFNAXXXX - Fixed Flange ISO (20-110 SW), RAAFFAXXXX - Fixed Flange BS (50-110 SW), RAAFCAXXXX - Blanking Flange ISO (63-110 SW), RAARCAXXXB - Reducing Bush BS (25-32 SW), RAARCAXXXC - Reducing Bush BS (32 SW), RAARCAXXXD - Reducing Bush BS (40-63 SW), RAARCAXXXE - Reducing Bush BS (50-63 SW), RAARCAXXXF - Reducing Bush BS (63-90 SW), RAARCAXXXG - Reducing Bush BS (75-110 SW), RAARCAXXXH - Reducing Bush BS (90 SW), RAARCAXXXI - Reducing Bush BS (110 SW), RAARCAXXXL - Reducing Bush BS (140-160 SW), RCAGOCXXXY - Elbow 90° BS/BSPP (20-110 SW x ½” to 4” BSP (F)), RCATICXXXY - Tee 90° BS/BSPP (20-110 SW (x2) x ½” to 4” BSP (F)), RCAMACXXXY - Socket BS/BSPP (20-110 SW x ½” to 4” BSP (F)), RCAAFCXXXY - Female Adaptor BS/BSPP (20-63 SW x ½” to 2” BSP (F)), RCAAMCXXXY - Male Adaptor BS/PSBB (20-110 SW x ½” to 4” BSP (M)), RCARCCXXXY - Reducing Bush BS/BSPP (20-32 SW x ½” to 1” BSP (F)),

Approval Holder:

Polypipe Italia s.r.l.

Company Name

Polypipe Italia s.r.l.

Address

Localita Pianmercato, 5c/d/h 16044 Cicagna (GE)

Country

Italy

View All Listings by this Company

Manufacturer:

Polypipe Italia s.r.l.

Company Name

Polypipe Italia s.r.l.

Address

Localita Pianmercato, 5c/d/h 16044 Cicagna (GE)

Country

Italy

View All Listings by this Company

Range of DZR brass push fit fittings for use with copper pipe (manufactured to BS EN 1057), PB pipe (manufactured to BS7291-2) and PEX pipe (manufactured to BS7291-3). Maximum working pressures and operating temperatures: 12.5 @ 20°C, and 3.0 bar @ 92ºC.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2307024

Size:

See model.

Marking:

John Guest logo (“JG”) (brand of Reliance Worldwide Corporation (UK) Ltd.) and CR on body.

Installation Requirements:

R001

Expiry date:

31/07/2028

Model:

Straight Adaptors: MW011504N: 15mm x ½” BSPT (M), MW012206N: 22mm x ¾” BSPT (M), MW012808N: 28mm x 1” BSPT (M), MW012818N: 28mm x 1” BSP (M). Male Couplers: 10MC(1/2): 10mm x ½” BSP (M), 15MC(1/2): 15mm x ½” BSP (M), 15MC(1/2)P: 15mm x ½” BSP (M), 22MC(3/4): 22mm x ¾” BSP (M), 22MC(3/4)P: 22mm x ¾” BSP (M). Female Adaptors: MW451514N: 15mm x ½” BSP (F), MW452216N: 22mm x ¾” BSP (F), 22CFA: 22mm x 1” BSP (F), 22CFAP: 22mm x 1” BSP (F). Back Plate Elbows: 15WB: 15mm x ½” BSP (F), 15WBP: 15mm x ½” BSP (F), 15WB2: 15mm x ½” BSP (F), 22WB: 22mm x ¾” BSP (F). Stem Adaptors: MW051504N: 15mm x ½” BSPT (M), MW052206N: 22mm x ¾” BSPT (M), MW052818N: 28mm x 1" BSP (M), MW501514N: 15mm x ½” BSP (F), MW502216N: 22mm x ¾” BSP (F). Male Adaptors: 22CMA: 22mm x 1” BSP (M), 22CMAP: 22mm x 1” BSP (M).

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101368

Size:

see model

Marking:

Ducco and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Equal Coupling DS2001-15 15mm Equal Coupling DS2001-18 18mm Equal Coupling DS2001-22 22mm Equal Coupling DS2001-28 28mm Equal Coupling DS2001-35 35mm Equal Coupling DS2001-42 42mm Equal Coupling DS2001-54 54mm Adjustable Coupling DS2002-15 15mm Adjustable Coupling DS2002-18 18mm Adjustable Coupling DS2002-22 22mm Adjustable Coupling DS2002-28 28mm Adjustable Coupling DS2002-35 35mm Adjustable Coupling DS2002-42 42mm Adjustable Coupling DS2002-54 54mm 90D Equal Elbow DS2003-15 15mm 90D Equal Elbow DS2003-18 18mm 90D Equal Elbow DS2003-22 22mm 90D Equal Elbow DS2003-28 28mm 90D Equal Elbow DS2003-35 35mm 90D Equal Elbow DS2003-42 42mm 90D Equal Elbow DS2003-54 54mm 90D Plain Elbow-B DS2004-15 15mm 90D Plain Elbow-B DS2004-18 18mm 90D Plain Elbow-B DS2004-22 22mm 90D Plain Elbow-B DS2004-28 28mm 90D Plain Elbow-B DS2004-35 35mm 90D Plain Elbow-B DS2004-42 42mm 90D Plain Elbow-B DS2004-54 54mm 45D Equal Elbow DS2005-15 15mm 45D Equal Elbow DS2005-18 18mm 45D Equal Elbow DS2005-22 22mm 45D Equal Elbow DS2005-28 28mm 45D Equal Elbow DS2005-35 35mm 45D Equal Elbow DS2005-42 42mm 45D Equal Elbow DS2005-54 54mm 45D Plain Elbow-B DS2006-15 15mm 45D Plain Elbow-B DS2006-18 18mm 45D Plain Elbow-B DS2006-22 22mm 45D Plain Elbow-B DS2006-28 28mm 45D Plain Elbow-B DS2006-35 35mm 45D Plain Elbow-B DS2006-42 42mm 45D Plain Elbow-B DS2006-54 54mm Equal Tee DS2007-15 15mm Equal Tee DS2007-18 18mm Equal Tee DS2007-22 22mm Equal Tee DS2007-28 28mm Equal Tee DS2007-35 35mm Equal Tee DS2007-42 42mm Equal Tee DS2007-54 54mm Reducing Tee DS2008-18*15 18mmx15mm Reducing Tee DS2008-22*15 22mmx15mm Reducing Tee DS2008-22*18 22mmx18mm Reducing Tee DS2008-28*22 28mmx22mm Reducing Tee DS2008-35*22 35mmx22mm Reducing Tee DS2008-35*28 35mmx28mm Reducing Tee DS2008-42*28 42mmx28mm Reducing Tee DS2008-42*35 42mmx35mm Reducing Tee DS2008-54*28 54mmx28mm Reducing Tee DS2008-54*35 54mmx35mm Reducing Tee DS2008-54*42 54mmx42mm Female Coupling DS2009-15*Rp1/2 15mmxRp1/2" Female Coupling DS2009-22*Rp3/4 22mmxRp3/4" Female Coupling DS2009-28*Rp1 28mmxRp1" Female Coupling DS2009-35*Rp1 1/4 35mmxRp1-1/4" Female Coupling DS2009-42*Rp1 1/2 42mmxRp1-1/2" Female Coupling DS2009-54*Rp2 54mmxRp2" Rotatable Coupling DS2010-15*G1/2 15mmxG1/2" Rotatable Coupling DS2010-22*G3/4 22mmxG3/4" Rotatable Coupling DS2010-28*G1 28mmxG1" Rotatable Coupling DS2010-35*G1 1/4 35mmxG1-1/4" Item Description Secondary Code Size (OD) Rotatable Coupling DS2010-42*G1 1/2 42mmxG1-1/2" Rotatable Coupling DS2010-54*G2 54mmxG2" Male Coupling DS2011-15*R1/2 15mmxR1/2" Male Coupling DS2011-22*R3/4 22mmxR3/4" Male Coupling DS2011-28*R1 28mmxR1" Male Coupling DS2011-35*R1 1/4 35mmxR1-1/4" Male Coupling DS2011-42*R1 1/2 42mmxR1-1/2" Male Coupling DS2011-54*R2 54mmxR2" Female Elbow DS2012-15*Rp1/2 15mmxRp1/2" Female Elbow DS2012-22*Rp3/4 22mmxRp3/4" Female Elbow DS2012-28*Rp1 28mmxRp1" Female Elbow DS2012-35*Rp1 1/4 35mmxRp1-1/4" Female Elbow DS2012-42*Rp1 1/2 42mmxRp1-1/2" Female Elbow DS2012-54*Rp2 54mmxRp2" Male Elbow DS2013-15*R1/2 15mmxR1/2" Male Elbow DS2013-22*R3/4 22mmxR3/4" Male Elbow DS2013-28*R1 28mmxR1" Male Elbow DS2013-35*R1 1/4 35mmxR1-1/4" Male Elbow DS2013-42*R1 1/2 42mmxR1-1/2" Male Elbow DS2013-54*R2 54mmxR2" Female Tee DS2014-15*Rp1/2 15mmxRp1/2" Female Tee DS2014-22*Rp3/4 22mmxRp3/4" Female Tee DS2014-28*Rp1 28mmxRp1" Female Tee DS2014-35*Rp1 1/4 35mmxRp1-1/4" Female Tee DS2014-42*Rp1 1/2 42mmxRp1-1/2" Female Tee DS2014-54*Rp2 54mmxRp2" Male Tee DS2015-15*R1/2 15mmxR1/2" Male Tee DS2015-22*R3/4 22mmxR3/4" Male Tee DS2015-28*R1 28mmxR1" Male Tee DS2015-35*R1 1/4 35mmxR1-1/4" Male Tee DS2015-42*R1 1/2 42mmxR1-1/2" Male Tee DS2015-54*R2 54mmxR2" Reducer-A DS2016-18*15 18mmx15mm Reducer-A DS2016-22*18 22mmx18mm Reducer-A DS2016-28*22 28mmx22mm Reducer-A DS2016-35*28 35mmx28mm Reducer-A DS2016-42*35 42mmx35mm Reducer-A DS2016-54*42 54mmx42mm Reducer Coupling-B DS20107-18*15 18mmx15mm Reducer Coupling-B DS20107-22*18 22mmx18mm Reducer Coupling-B DS20107-28*22 28mmx22mm Reducer Coupling-B DS20107-35*28 35mmx28mm Reducer Coupling-B DS20107-42*35 42mmx35mm Reducer Coupling-B DS20107-54*42 54mmx42mm

Approval Holder:

Gentler Industrial co., Ltd

Company Name

Gentler Industrial co., Ltd

Address

1F no 986

View All Listings by this Company