TEST SITE

Combination Tap Assemblies

Section Code 0470 : Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#2106302

Single hole, single outlet (swivel) combination tap assembly with brass body (chrom plated). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2106302
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
CAL on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2026
Model:
Turina Act3023
Product Images

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co Ltd
Address
No. 10 JINBO ROAD, BINGGANG INDUSTRIAL AREA SHAMEN TOWN, YUHUAN, ZHEJIANG
Country
Zhejiang Province
General Email

View All Listings by this Company

Print This Approval


#2106902

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass), incorporating ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with single check valves with integral servicing valve for both inlets (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2106902
Marking:
Bristan on the tap body
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2026
Model:
CHV EFSNK C CHV EFSNK C TO (Tap Only)

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2106903

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2106903
Size:
½” BSP captive nut
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2026
Model:
MLB SNK BLK – (Black) MLB SNK WHT – (White)

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2110803

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet can incorporate either a plastic flow straightener or a plastic aerator. When supplied with a plastic flow straightener there is a combined EPDM washer and stainless steel strainer behind it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110803
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
NABIS ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2026
Model:
B08928 LEVICO MONO KITCHEN COMBINATION TAP ASSEMBLY

Approval Holder:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2007392

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headwork with single lever operating members. The inlets incorporate a plastic strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007392
Size:
½” BSP(M)
Marking:
SMR on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2025
Model:
CALAGGIO TAP8309 & STRONA TAP3640 COMBINATION TAP ASSEMBLIES
Product Images

Approval Holder:
Howdens Joinery
Company Name
Howdens Joinery
Address
Thorpe Road Howden East Yorkshire
Country
DN14 7PA

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval


#2009347

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009347
Size:
Stainless steel braided EPDM lined hose assemblies with 15mm Compression end connections.
Marking:
“CAL” on rear of handle.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2025
Model:
ARNO TAP2423 COMBINATION TAP ASSEMBLIES
Product Images

Approval Holder:
Howdens Joinery
Company Name
Howdens Joinery
Address
Thorpe Road Howden East Yorkshire
Country
DN14 7PA

View All Listings by this Company
Manufacturer:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434

View All Listings by this Company

Print This Approval


#2103339

Range of single hole single outlet (swivel) combination tap assmeblies with quarter turn ceramic disc headworks and single lever operating members. The outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2103339
Size:
Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections.
Marking:
CAL on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2026
Model:
VELINO TAP9033 combination tap assemblies
Product Images

Approval Holder:
Howdens Joinery
Company Name
Howdens Joinery
Address
Thorpe Road Howden East Yorkshire
Country
DN14 7PA

View All Listings by this Company
Manufacturer:
Abode Home Products Ltd.
Company Name
Abode Home Products Ltd.
Address
Unit L Zenith Park Whaley Road
Postcode
S75 1HT
Country
Barnsley

View All Listings by this Company

Print This Approval


#2111800

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2111800
Size:
15mm copper tail
Marking:
Palazzani on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2026
Model:
Art. 005347 range: 40511410 with Promixa mix short lever 40534710 with long lever 40511910 with long lever

Approval Holder:
Palazzani.eu Srl
Company Name
Palazzani.eu Srl
Address
Via Mario Anelli 75/77, Casalmorano 26020 (Cr)
Country
Italy
Phone
0374/74141
General Email
tecnico@palazzani.eu

View All Listings by this Company
Manufacturer:
Palazzani.eu Srl
Company Name
Palazzani.eu Srl
Address
Via Mario Anelli 75/77, Casalmorano 26020 (Cr)
Country
Italy
Phone
0374/74141
General Email
tecnico@palazzani.eu

View All Listings by this Company

Print This Approval


#2107027

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½" captive nut end connections.
Marking:
Momali on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2026
Model:
M54585-244
Product Images

Approval Holder:
Zhejiang Momali Sanitary Utensils Co. Ltd.
Company Name
Zhejiang Momali Sanitary Utensils Co. Ltd.
Address
639 Haigong street, Longwan District, Wenzhou city, China

View All Listings by this Company
Manufacturer:
Zhejiang Momali Sanitary Utensils Co. Ltd.
Company Name
Zhejiang Momali Sanitary Utensils Co. Ltd.
Address
639 Haigong street, Longwan District, Wenzhou city, China

View All Listings by this Company

Print This Approval


#2107042

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with either single lever or cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107042
Size:
Polyethylene terephthalate (PET) braided TpSiv lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Booth & Co. (brand of Vado) on operating members.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2026
Model:
BC-AXB-Y50-ZZ Where: Y denotes the operating member type, and can be replaced with: 1 = Cross Top, 2 = Single Lever. ZZ denotes the finish, and can be replaced with: BN = Bright Nickel, CP = Chrome Plated.
Product Images

Approval Holder:
Vado
Company Name
Vado
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466

View All Listings by this Company
Manufacturer:
Vado
Company Name
Vado
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 12 of 35

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.