Water Regulations Approval Scheme Ltd

Rubbers

Section Code 5365 : Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

WRAS Approval Number: #2208562

'HT5697-5'. Black coloured, injection moulded EPDM material. Shore hardness 67. Tested in-radius size 1.0mm. For use with water up to 50°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2208562
Expiry date:: 31/08/2027

Approval Holder:: Terramix SA/Hultec

Company Name
Terramix SA/Hultec
Address
De Empaques Santa Ana 150 M Este Y 125 M Sur Pozos De Santa Ana
Country
San Jose, Costa Rica
Phone
Tel: +506 2829900 Fax: +506 2822514

View All Listings by this Company

WRAS Approval Number: #2208572

Black coloured, compression moulded EPDM materials with a tested in-radius size of 1.3mm. 'EPW-50, EPW-55, EPW-60, EPW-65, EPW-70 & EPW-75' have a shore hardness of between 50 & 75 and are for use with water up to 23°C. ‘EPW-80' has a shore hardness of 80 and is suitable for use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2208572
Expiry date:: 31/08/2027

Approval Holder:: Vajra Rubber Products Pvt. Ltd.

Company Name
Vajra Rubber Products Pvt. Ltd.
Address
Regd. Office XII/371A, Pyngode, Konathakunnu PO, Thrissur District, Kerala, Pin-680 123
Country
India

View All Listings by this Company

WRAS Approval Number: #2210506

'EH600-151'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2210506
Expiry date:: 31/10/2027

Approval Holder:: Chi-Yih Enterprise Co Ltd

Company Name
Chi-Yih Enterprise Co Ltd
Address
No 93, Lane 245, Section 3 Sha-Tien Road Ta-Tu 432 Taichung
Country
Taiwan
Phone
+88 6426 996 802
General Email
eric@chiyih.com

View All Listings by this Company

WRAS Approval Number: #2110559

'H600042'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.3mm. For use with water up to 65°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2110559
Expiry date:: 31/10/2026

Approval Holder:: ARSAN KAUÇUK PLASTİK MAKİNE SANAYİİ VE TİCARET A.Ş.

Company Name
ARSAN KAUÇUK PLASTİK MAKİNE SANAYİİ VE TİCARET A.Ş.
Address
Ferizli OSB. 1. Cadde No:20/1, Ferizli, Sakarya
Country
Turkey

View All Listings by this Company

WRAS Approval Number: #2209516

'Hongli IRHD 70'. Black coloured, press moulded EPDM material. Shore hardness 70. Tested in-radius size 1.09mm. For use with water up to 23°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2209516
Expiry date:: 30/09/2027

Approval Holder:: Maanshan Hongli Rubber Products Co., Ltd.

Company Name
Maanshan Hongli Rubber Products Co., Ltd.
Address
No. 226 Xinhua Road, HuaShan Area, Maanshan City, Anhui Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2302506

‘EWA 12150 (EW48) Rev.1. EWA 12155A (EP55) Rev.1. EWA 12160A (EW 60) Rev.1. EWA 12165 (EW65 2GS) Rev.1. EWA 12170 (WRC 70) Rev.1. EWA 12175 (WRC 75) Rev.1. EWA 12180 (EW80) Rev.1’. Black coloured, compression moulded, EPDM sheet materials. Shore hardness between 50 & 80. Tested in-radius size 1.2mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2302506
Expiry date:: 29/02/2028

Approval Holder:: Polytech Industries LLC

Company Name
Polytech Industries LLC
Address
Al Hamra Industrial Zone (earlier RAKIA Industrial Zone) WIZ-04, WH 25-28, Al Jazira, Al Hamra, Al Khaimah
Country
United Arab Emirates
Phone
+971 7 2434951
General Email
admin@polytechindustries.ae

View All Listings by this Company

WRAS Approval Number: #2201538

‘SBPEP4555 (50), SBPEP55 (55), SBPEP60 (60), SBPEP65 (65), SBPEP70 (70), SBPEP75 (75) & SBPEP7085 (80)’. Black coloured, compression moulded EPDM rubber sheet materials with a shore hardness of between 50 & 80. Tested in-radius size of 1.0mm. For use with water up to 60°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2201538
Expiry date:: 31/01/2027

Approval Holder:: Shree Balaji Polytech Products PVT Ltd.

Company Name
Shree Balaji Polytech Products PVT Ltd.
Address
Fortuna Tower, 23A Netaji Subhas Road, 1st Floor, Room No. 27
Country
Kolkata-700 001,

View All Listings by this Company

WRAS Approval Number: #2210507

'E6083AA'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2210507
Expiry date:: 31/10/2027

Approval Holder:: Ge Mao Rubber Industrial Co. Ltd.

Company Name
Ge Mao Rubber Industrial Co. Ltd.
Address
No15, Kung-Yeh East 4th Road, Lu-Kang, Chang Hua, Taiwan
Country
China
Phone
+886 4781 0288 Fax: +886 4781 0289

View All Listings by this Company

WRAS Approval Number: #2209530

'EPDM C12251'. Black coloured, compression moulded, EPDM rubber material. Shore hardness 77. Tested in-radius size 12.5mm. For use with water up to 23°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2209530
Expiry date:: 30/09/2027

Approval Holder:: KSB SAS

Company Name
KSB SAS
Address
Zone Industriale de Gagnaire Fonseche 24490 LA ROCHE CHALAIS France
Phone
(+33) 553 92 44 00

View All Listings by this Company

WRAS Approval Number: #2210508

'EP601289C'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2210508
Expiry date:: 31/10/2027

Approval Holder:: Fannteer Co. Ltd.

Company Name
Fannteer Co. Ltd.
Address
3F, No. 392, Section 1, Neihu Road, Neihu District, Taipei City 11493
Country
Taiwan
Phone
+886 2 2577 4691
General Email
info@fannteer.com.tw

View All Listings by this Company