Water Regulations Approval Scheme Ltd

Tubes

Section Code 1863 : Elastomeric.

WRAS Approval Number: #2210345

Range of stainless steel or nylon braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2210345
Size:: DN6 hoses available with the following end connections 8x1, 8x0,75, 10x1, 11x1, 12x1, 15x1, 14x1, F3/8, F1/2, F15x1, F14x1, F9/16, M3/8, M1/2, NPB Ø15, Ø15 c.o, F3/8 c/curva, F1/2 c/curva, F1/2 conical, T8 DN8 available with the following end connections 10x1, 11x1, 12x1, 15x1, 14x1, F3/8 F1/2, F3/4, F15x1; F14x1; F9/16; M3/8; M1/2; NPB Ø15; Ø15 c.o.; F3/8 c/curva; F1/2 c/curva; F1/2 conical; T8 DN10 hoses available with the following end connections: 12x1; F3/8; F1/2; F3/4; M3/8; M1/2; NPB Ø15; Ø15 c.o.; F3/8 c/curva; F1/2 c/curva; F1/2 conical; DN13 hoses available with the following end connections: F1/2; F3/4; M1/2; M3/4; F1/2 c/curva;
Marking:: FQR, date of manufacture (YY) & WRAS on ferrule
Installation Requirements:: R001 R008
Expiry date:: 31/10/2027
Model:: Series DN6K Series DN6KL Series DN6KZ Series P6K Series P6KL Series P6KZ Series DN8K Series DN8KL Series DN8KZ Series DPV8K Series DPV8KL Series DPV8KZ Series P9K Series P9KL Series P9KZ Series DN10K Series DN10KL Series DN10KZ Series DN13K Series DN13KL Series DN13KZ

Product Images

Approval Holder:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 28010 Briga Novarese (No)
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company
Manufacturer:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 28010 Briga Novarese (No)
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company

WRAS Approval Number: #2103343

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103343
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: Altecnic WRAS and (date of manufacture) LD on ferrule Where the date code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019. Model added September 2021: AP-400012: Altecnic and date code on body. Where the date code (if present) indicates the date of manufacture as follows: I - 2019, J - 2020, K - 2021, L - 2022, M - 2023, N - 2024. Followed by: A - Jan, Feb, March. B - Apr, May, June. C - July, Aug, Sept. D - Oct, Nov, Dec. e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec)
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: JL-F1400120012487 & JL-140038003813

Approval Holder:: Altecnic Ltd - Caleffi Group

Company Name
Altecnic Ltd - Caleffi Group
Address
Mustang Drive, Stafford Staffordshire
Postcode
ST16 1GW
Country
England
Phone
+44 (0)1785 218200
General Email
specifications@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #2207056

Stainless-steel or nylon braided EPDM lined flexible hoses assemblies with various end connections (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2207056
Size:: See model.
Marking:: M&J (Trademark of Taizhou M&J Sanitary Ware Co., Ltd.), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: MJ-SS-E (stainless steel braided) & MJ-SS-E (Nylon braided): DN6 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), Plastic quick connector DN11. D8 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), ½" captive nut (brass barb), ½" captive nut (SUS barb), ¾" captive nut (brass barb), ¾" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), F15x1 (brass barb), F15x1 (SUS barb), M15x1 (brass barb), M15x1 (SUS barb), Ø11 insert (brass barb), Ø11 insert (SUS barb), Ø11 insert (plastic barb), Plastic quick connector DN11.

Product Images

Approval Holder:: Taizhou M&J Sanitary Ware Co., Ltd.

Company Name
Taizhou M&J Sanitary Ware Co., Ltd.
Address
Luqiao District, Taizhou City, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2211707

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2211707
Size:: see model
Marking:: PC, WRAS and year of manufacture on crimp connection Plumb Centre on end
Installation Requirements:: R001
Expiry date:: 30/11/2027
Model:: ½“ compression x ½" (F) BSP captive nut: 81891 300mm & 81832 500mm - DN10 81884 300mm & 8188 500mm - DN8 ¾“ compression x ¾" (F) BSP captive nut: 81879 500mm & 81885 300mm - DN13

Approval Holder:: Grafton Merchanting

Company Name
Grafton Merchanting
Address
Ashfield Naas Road Dublin 22 Ireland

View All Listings by this Company

WRAS Approval Number: #2308800

‘TAQ’ range of stainless steel or grey nylon braided (indicated by ACB in model name), EPDM lined flexible hose assemblies, incorporating various end connections. Some of the possible end connections also incorporate EPDM washers, gaskets or ‘O’-rings. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2308800
Size:: see models
Marking:: Tucai, TB, WRAS, YY.
Installation Requirements:: R001 R008
Expiry date:: 31/08/2028
Model:: TAQ MINI and TAQ MINI ACB: DN6 hoses, available with M8x1, M10x1, 1/2" Captive Nut, 3/8" Captive Nut, Clip 10, 1/2"BSP (M), 3/8” BSP (M), M15x1 Captive nut and Elbow nut ½”. TAQ and TAQ ACB: DN8 hoses, available with M10x1,1/2" Captive Nut, M12x1, 1/2"BSP (M), Compression fitting 15mm, spigot 10mm, spigot 15mm, M8x1, 3/8" Captive Nut, 3/8” BSP (M), Elbow nut 3/8” Elbow nut ½”, M15x1 Captive nut, ¾” Captive nut, 1/2" valve, Compression fitting 10 mm, 3/4" nut Elbow, Elbow ER, Clip 10. TAQ FORTE and TAQ FORTE ACB: DN10 hoses, available with Compression fitting 15mm, 1/2" Captive Nut, 3/4" Captive Nut, 1/2" BSP (M), spigot 10mm, 3/4" nut Elbow, spigot 15mm, Clip 10, 3/8" Captive Nut, 1/2" valve, Elbow ER, 1/2" nut Elbow, M15x1 Captive nut, M12x1, Elbow nut 3/8”, 3/4" BSP (M), Compression fitting 10mm. TAQ SUPER // TAQ SUPER ACB: DN13 hoses, available with 1/2" nut Elbow, 3/4" nut Elbow, 1/2" BSP (M), 3/4" BSP (M), 1/2" Captive Nut, 3/4" Captive Nut, spigot15mm, Compression fitting 15mm.

Approval Holder:: Tucai S.A.

Company Name
Tucai S.A.
Address
Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)
Country
Spain
Phone
+34 93 718 95 62
General Email
info@tucai.com

View All Listings by this Company
Manufacturer:: Tucai Bulgaria SP Ltd.

Company Name
Tucai Bulgaria SP Ltd.
Address
7538 Aydemir Village 39 Chernozem Street Silistra Region
Country
Bulgaria
General Email

View All Listings by this Company