Water Regulations Approval Scheme Ltd

Tubes

Section Code 1863 : Elastomeric.

WRAS Approval Number: #2210345

Range of stainless steel or nylon braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2210345
Size:: DN6 hoses available with the following end connections 8x1, 8x0,75, 10x1, 11x1, 12x1, 15x1, 14x1, F3/8, F1/2, F15x1, F14x1, F9/16, M3/8, M1/2, NPB Ø15, Ø15 c.o, F3/8 c/curva, F1/2 c/curva, F1/2 conical, T8 DN8 available with the following end connections 10x1, 11x1, 12x1, 15x1, 14x1, F3/8 F1/2, F3/4, F15x1; F14x1; F9/16; M3/8; M1/2; NPB Ø15; Ø15 c.o.; F3/8 c/curva; F1/2 c/curva; F1/2 conical; T8 DN10 hoses available with the following end connections: 12x1; F3/8; F1/2; F3/4; M3/8; M1/2; NPB Ø15; Ø15 c.o.; F3/8 c/curva; F1/2 c/curva; F1/2 conical; DN13 hoses available with the following end connections: F1/2; F3/4; M1/2; M3/4; F1/2 c/curva;
Marking:: FQR, date of manufacture (YY) & WRAS on ferrule
Installation Requirements:: R001 R008
Expiry date:: 31/10/2027
Model:: Series DN6K Series DN6KL Series DN6KZ Series P6K Series P6KL Series P6KZ Series DN8K Series DN8KL Series DN8KZ Series DPV8K Series DPV8KL Series DPV8KZ Series P9K Series P9KL Series P9KZ Series DN10K Series DN10KL Series DN10KZ Series DN13K Series DN13KL Series DN13KZ

Product Images

Approval Holder:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 28010 Briga Novarese (No)
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company
Manufacturer:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 28010 Briga Novarese (No)
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company

WRAS Approval Number: #2103343

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103343
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: Altecnic WRAS and (date of manufacture) LD on ferrule Where the date code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019. Model added September 2021: AP-400012: Altecnic and date code on body. Where the date code (if present) indicates the date of manufacture as follows: I - 2019, J - 2020, K - 2021, L - 2022, M - 2023, N - 2024. Followed by: A - Jan, Feb, March. B - Apr, May, June. C - July, Aug, Sept. D - Oct, Nov, Dec. e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec)
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: JL-F1400120012487 & JL-140038003813

Approval Holder:: Altecnic Ltd - Caleffi Group

Company Name
Altecnic Ltd - Caleffi Group
Address
Mustang Drive, Stafford Staffordshire
Postcode
ST16 1GW
Country
England
Phone
+44 (0)1785 218200
General Email
specifications@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #2207056

Stainless-steel or nylon braided EPDM lined flexible hoses assemblies with various end connections (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2207056
Size:: See model.
Marking:: M&J (Trademark of Taizhou M&J Sanitary Ware Co., Ltd.), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: MJ-SS-E (stainless steel braided) & MJ-SS-E (Nylon braided): DN6 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), Plastic quick connector DN11. D8 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), ½" captive nut (brass barb), ½" captive nut (SUS barb), ¾" captive nut (brass barb), ¾" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), F15x1 (brass barb), F15x1 (SUS barb), M15x1 (brass barb), M15x1 (SUS barb), Ø11 insert (brass barb), Ø11 insert (SUS barb), Ø11 insert (plastic barb), Plastic quick connector DN11.

Product Images

Approval Holder:: Taizhou M&J Sanitary Ware Co., Ltd.

Company Name
Taizhou M&J Sanitary Ware Co., Ltd.
Address
Luqiao District, Taizhou City, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2211707

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2211707
Size:: see model
Marking:: PC, WRAS and year of manufacture on crimp connection Plumb Centre on end
Installation Requirements:: R001
Expiry date:: 30/11/2027
Model:: ½“ compression x ½" (F) BSP captive nut: 81891 300mm & 81832 500mm - DN10 81884 300mm & 8188 500mm - DN8 ¾“ compression x ¾" (F) BSP captive nut: 81879 500mm & 81885 300mm - DN13

Approval Holder:: Grafton Merchanting

Company Name
Grafton Merchanting
Address
Ashfield Naas Road Dublin 22 Ireland

View All Listings by this Company

WRAS Approval Number: #2308800

‘TAQ’ range of stainless steel or grey nylon braided (indicated by ACB in model name), EPDM lined flexible hose assemblies, incorporating various end connections. Some of the possible end connections also incorporate EPDM washers, gaskets or ‘O’-rings. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2308800
Size:: see models
Marking:: Tucai, TB, WRAS, YY.
Installation Requirements:: R001 R008
Expiry date:: 31/08/2028
Model:: TAQ MINI and TAQ MINI ACB: DN6 hoses, available with M8x1, M10x1, 1/2" Captive Nut, 3/8" Captive Nut, Clip 10, 1/2"BSP (M), 3/8” BSP (M), M15x1 Captive nut and Elbow nut ½”. TAQ and TAQ ACB: DN8 hoses, available with M10x1,1/2" Captive Nut, M12x1, 1/2"BSP (M), Compression fitting 15mm, spigot 10mm, spigot 15mm, M8x1, 3/8" Captive Nut, 3/8” BSP (M), Elbow nut 3/8” Elbow nut ½”, M15x1 Captive nut, ¾” Captive nut, 1/2" valve, Compression fitting 10 mm, 3/4" nut Elbow, Elbow ER, Clip 10. TAQ FORTE and TAQ FORTE ACB: DN10 hoses, available with Compression fitting 15mm, 1/2" Captive Nut, 3/4" Captive Nut, 1/2" BSP (M), spigot 10mm, 3/4" nut Elbow, spigot 15mm, Clip 10, 3/8" Captive Nut, 1/2" valve, Elbow ER, 1/2" nut Elbow, M15x1 Captive nut, M12x1, Elbow nut 3/8”, 3/4" BSP (M), Compression fitting 10mm. TAQ SUPER // TAQ SUPER ACB: DN13 hoses, available with 1/2" nut Elbow, 3/4" nut Elbow, 1/2" BSP (M), 3/4" BSP (M), 1/2" Captive Nut, 3/4" Captive Nut, spigot15mm, Compression fitting 15mm.

Approval Holder:: Tucai S.A.

Company Name
Tucai S.A.
Address
Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)
Country
Spain
Phone
+34 93 718 95 62
General Email
info@tucai.com

View All Listings by this Company
Manufacturer:: Tucai Bulgaria SP Ltd.

Company Name
Tucai Bulgaria SP Ltd.
Address
7538 Aydemir Village 39 Chernozem Street Silistra Region
Country
Bulgaria
General Email

View All Listings by this Company

WRAS Approval Number: #2212019

Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2212019
Size:: ½" BSP (F) conical nut end connections.
Marking:: Jetom, WRAS, and date of manufacture (YYYY.M.D) on end connector.
Installation Requirements:: R001
Expiry date:: 31/12/2027
Model:: H3DFG-XXXX01C & H3DFG-XXXX68C With XXXX denoting length 20-200cm.

Product Images

Approval Holder:: Quanzhou Jetom Hose Industry Co.,Ltd

Company Name
Quanzhou Jetom Hose Industry Co.,Ltd
Address
No. 1, South Road, High-tech Industrial Park, Luncang Town, Nan'an City, Fujian

View All Listings by this Company

WRAS Approval Number: #2301032

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2301032
Size:: See model below.
Marking:: MRG, WRAS, DN & year of production (YYYY).
Installation Requirements:: R001
Expiry date:: 31/01/2028
Model:: X3303IW (DN10 Stainless steel F 1/2” BSP X F 3/4” BSP), X3329IW (DN10 Stainless steel F 1/2” BSP X FC 1/2” BSP), X4300IW (DN13 Stainless steel F 1/2” BSP X F 1/2” BSP), X4328IWG (DN13 Stainless steel M 3/4” BSP X F 3/4” BSP), X4330IWG (DN13 Stainless steel F 3/4” BSP X FC 3/4” BSP).

Approval Holder:: M.R.G. S.r.l.

Company Name
M.R.G. S.r.l.
Address
Via per Baraggia, 1 28024 Gozzano (NO) Italy
Phone
+39 0322 94131
General Email
info@mrgspa.com

View All Listings by this Company
Manufacturer:: M.R.G. S.r.l.

Company Name
M.R.G. S.r.l.
Address
Via per Baraggia, 1 28024 Gozzano (NO) Italy
Phone
+39 0322 94131
General Email
info@mrgspa.com

View All Listings by this Company

WRAS Approval Number: #2301068

Range of interlocked shower hoses with EPDM seals and various finishes.

Non-metallic materials and components comply with BS6920 at 70°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2301068
Size:: ½” BSP captive nut x ½” BSP captive nut
Marking:: HG and WRAS on ferrule.
Installation Requirements:: R001
Expiry date:: 31/01/2028
Model:: 28 132 xxx Hansgrohe Sensoflex Metal Shower hose 125 cm 28 133 002 Hansgrohe Sensoflex Shower hose 1,50m 28 175 002 Hansgrohe Sensoflex Shower hose 1,50m 28 136 xxx Hansgrohe Sensoflex Metal Shower hose 160 cm 28 135 002 Hansgrohe Sensoflex Shower hose 1,75m 28 134 xxx Hansgrohe Sensoflex Metal Shower hose 200 cm 28 134 002 Hansgrohe Sensoflex Shower hose 2,00m 28 177 002 Hansgrohe Sensoflex Shower hose 2,00m available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2301349

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2301349
Size:: DN8 with end connections: M10, M12, F3/8”, F1/2”, 14.7mm & 15mm. DN10 with end connections: M10, M12, F3/8”, F1/2”, F3/4”, 14.7mm, 15mm & 22mm. DN13 with end connections: F1/2”, F3/4”, 14.7mm, 15mm & 22mm.
Marking:: SG, WRAS & year of manufacture YYYY on ferrule
Installation Requirements:: R001
Expiry date:: 31/01/2028
Model:: SG-EPDM-01 series

Approval Holder:: Taizhou SG Hose Co., Ltd.

Company Name
Taizhou SG Hose Co., Ltd.
Address
Shamen Bingang Industrial City, Yuhuan City, Zhejiang Province, China

View All Listings by this Company
Manufacturer:: Taizhou SG Hose Co., Ltd.

Company Name
Taizhou SG Hose Co., Ltd.
Address
Shamen Bingang Industrial City, Yuhuan City, Zhejiang Province, China

View All Listings by this Company

WRAS Approval Number: #2303333

Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2303333
Size:: SEE MODEL
Marking:: HL, WRAS and year of manufacture (YYYY) on crimp connection.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: HL16W-EPDM-01 series: Bore diameter DN8 available with end connections: M8x1, M8x1.25, M10x1, M12x1, M14x1, M15x1, 3/8”, ½”, ¾” & 15mm. Bore diameter DN10 available with end connections: M10x1, M12x1, 3/8”, ½”, ¾”, 15mm & 22mm. Bore diameter DN13 available with end connections: ½”, ¾”, 15mm & 22mm.

Approval Holder:: Yuhuan Hengli Plumbing Manufacturing Co.,LTD

Company Name
Yuhuan Hengli Plumbing Manufacturing Co.,LTD
Address

View All Listings by this Company
Manufacturer:: Yuhuan Hengli Plumbing Manufacturing Co.,LTD

Company Name
Yuhuan Hengli Plumbing Manufacturing Co.,LTD
Address

View All Listings by this Company

WRAS Approval Number: #2303014

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of brass end connections (see models). “DN 9.5 ½” compression with ISO valve” model also incorporates a screwdriver operated isolation valve. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2303014
Size:: DN9: ½” BSP (F) Captive nut, M10x1, ½” Compression, ½” BSP (M) or M12x1. DN9.5: ½” BSP (F) Captive nut, ½” BSP (F) Captive Nut with ISO valve M10x1, ½” Compression with ISO valve, ½” BSP (M) or M12x1. DN12.5: ½” BSP (F) Captive nut, 3/4” BSP (F) Captive nut, ½” Compression, ¾” Compression, ½” BSP (M) or ¾” BSP (M).
Marking:: Ivanci logo (trademark of Zhejiang Fansheng Fluid Control Co., LTD), WRAS & date of manufacture (MMYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: RCC.L

Approval Holder:: Zhejiang Fansheng Fluid Control Co., LTD

Company Name
Zhejiang Fansheng Fluid Control Co., LTD
Address
Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2303311

Range of stainless steel interlocked shower hoses with an EPDM inner liner and EPDM washers.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2303311
Size:: ½” BSP nut (various types, see model).
Marking:: Binyang on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: SS112-A-A-**-**-** Where: A = end connection (type and fitting): 1. Conic nut smooth, 2. Conic nut smooth, 3. Conic nut with ‘O’-ring, 4. Conic nut with ‘O’-ring, 5. Ball nut, 6. Hex nut, 7. Knurl nut. The first suffix “**” represents the material of inner tube: EPDM. The second suffix “**” represents the length: 50cm-200cm. The third suffix “***” represents surface finish: CP: Chrome plated, BN: Brushed Nickel, MB: Matte Black, ORB: Oil Rubber Bronze, EP: Polish, G: Gold. Example code: SS112-1-3-EPDM-200-CP = Conic nut smooth at one end, Conic nut with ‘O’-ring at the other, EPDM inner hose, 200cm long and chrome plated.

Approval Holder:: Xiamen Binyang Sanitary Ware Co., Ltd.

Company Name
Xiamen Binyang Sanitary Ware Co., Ltd.
Address
4/F, No. 588 Tongming Road, Industrial Concentration Zone, Tong’an District, Xiamen.
Country
China
Phone
+86-0592-7258165
General Email
357034425@qq.com

View All Listings by this Company
Manufacturer:: Xiamen Binyang Sanitary Ware Co., Ltd.

Company Name
Xiamen Binyang Sanitary Ware Co., Ltd.
Address
4/F, No. 588 Tongming Road, Industrial Concentration Zone, Tong’an District, Xiamen.
Country
China
Phone
+86-0592-7258165
General Email
357034425@qq.com

View All Listings by this Company

WRAS Approval Number: #2109068

Range of stainless steel, PVC and nylon braided shower hoses (various finishes), incorporating PVC, EPDM or PEX liners and various end connections.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2109068
Size:: See model
Marking:: GOLOY, WRAS and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 30/09/2026
Model:: WM-BB02, WM-BB02-CH, WM-BB02-BN, WM-BB02-BL, WM-BB02-BZ & WM-BB02-BB M15 (M) inlet-1/2" BSP conical nut models: Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment 1/2" BSP captive nut inlet x 1/2" BSP conical nut outlet models: PVC hose: HC11 50~250cm Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment Stainless Steel Double lock hose HXXXXX 50~250cm 1st X stands for materials of inner tube: A=PVC B=EPDM P=PEX 2nd X stands for inner diameter: 7=DN7 10=DN10 3rd X stands for materials of outer tube: 1=SUS201 2=SUS202 3=SUS304 4th X and 5th X stands for colour of surface treatment: 01=electrolysis 02=chrome plated 03=matt black 04=ORB 05=green bronze 06=antique brass 07=golden 08=karat gold 09=rose gold 10=red bronze 11=drawing nickel

Approval Holder:: Harrison Bathrooms

Company Name
Harrison Bathrooms
Address
Gelderd Cross 94 Gelderd Road
Postcode
LS12 6HJ

View All Listings by this Company
Manufacturer:: Xiamen Oshince Technology Co., Ltd

Company Name
Xiamen Oshince Technology Co., Ltd
Address
No.177, South Second Ring Road, Tong An Industrial district, Xiamen City

View All Listings by this Company

WRAS Approval Number: #2305002

Range of stainless steel braided, EPDM lined flexible hose assemblies with various brass end connections. The hoses are supplied with EPDM O-rings or washers. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2305002
Size:: See Models.
Marking:: Jetom, WRAS, Year of Manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/05/2028
Model:: H5MAJ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 3/8” BSP (F), 30~200cm H5MAK-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M8*1, 30~200cm H5MAL-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M10*1, 30~200cm H5MAM-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M12*1,30~200cm H5MAN-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M15*1, 30~200cm H5MAP-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 1/2” BSP (F), 30~200cm H5MAQ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * 1/2” BSP (F), 30~200cm H5MAR-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M8*1, 30~200cm H5MAS-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M10*1, 30~200cm H5MAT-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M12*1, 30~200cm H5MAU-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M15*1, 30~200cm H5NAJ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 3/8” BSP (F), 30~200cm H5NAK-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M8*1, 30~200cm H5NAL-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M10*1,30~200cm H5NAM-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M12*1, 30~200cm H5NAN-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M15*1, 30~200cm H5NAP-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 1/2” BSP (F), 30~200cm H5NAQ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * 1/2” BSP (F), 30~200cm H5NAR-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M8*1,30~200cm H5NAS-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M10*1, 30~200cm H5NAT-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M12*1, 30~200cm H5NAU-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M15*1, 30~200cm H5PAJ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 3/8” BSP (F), 30~200cm H5PAK-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M8*1,30~200cm H5PAL-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M10*1, 30~200cm H5PAM-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M12*1, 30~200cm H5PAN-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M15*1, 30~200cm H5PAP-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 1/2” BSP (F), 30~200cm H5PAQ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * 1/2” BSP (F), 30~200cm H5PAR-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M8*1, 30~200cm. H5PAS-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M10*1, 30~200cm. H5PAT-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M12*1, 30~200cm. H5PAU-XXX101C-1Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M15*1, 30~200cm. XXX denotes the length of the hose (30cm to 200cm). For examples: 50cm = 050 100cm = 100 150cm = 150

Approval Holder:: Quanzhou Jetom Hose Industry Co. Ltd.

Company Name
Quanzhou Jetom Hose Industry Co. Ltd.
Address
7th of No. 1, High-tech Park South Road, Luncang Town, Nan'an City, Quanzhou City, Fujian Province, P.R. China
Country
China
Phone
+86 595 68979514

View All Listings by this Company
Manufacturer:: Quanzhou Jetom Hose Industry Co. Ltd.

Company Name
Quanzhou Jetom Hose Industry Co. Ltd.
Address
7th of No. 1, High-tech Park South Road, Luncang Town, Nan'an City, Quanzhou City, Fujian Province, P.R. China
Country
China
Phone
+86 595 68979514

View All Listings by this Company

WRAS Approval Number: #2306017

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2306017
Size:: Please refer to model.
Marking:: Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: UKWR denotes the customer code and is replaced with XX. L denotes the length of the hose (between 50mm & 4,000mm) and is replaced with L50 to L4000. DG10E-UKWR-001-L (15mm compression x M10) - Bore size DN8. DG10E-UKWR-002-L (15mm compression x M12) - Bore size DN8. DG10E-UKWR-003-L (10mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-004-L (15mm compression x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-005-L (F ½" BSP X F ½" BSP) - Bore size DN10. DG10E-UKWR-006-L (15mm compression iso valve x F ½"BSP) - Bore size DN10. DG10E-UKWR-007-L (15mm push fit iso valve x 15mm push fit) - Bore size DN10. DG10E-UKWR-008-L (22mm compression iso valve x F ¾" BSP) - Bore size DN13. DG10E-UKWR-009-L (22mm x F ¾" BSP) - Bore size DN13. DG10E-UKWR-011-L (15mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-012-L (15mm compression x F ½" BSP) - Bore size DN10. DG10E-UKWR-013-L (15mm compression x 10mm compression) - Bore size DN10. DG10E-UKWR-015-L (15mm compression x 15mm compression) - Bore size DN10. DG10E-UKWR-014-L (15mm compression x F ¾" BSP) - Bore size DN10. DG10E-UKWR-016-L (15mm compression x 22mm compression) - Bore size DN10. DG10E-UKWR-017-L (F ½” BSP x 22mm compression) - Bore size DN10. DG10E-UKWR-018-L (15mm compression iso valve x F ¾" BSP) - Bore size DN10. DG10E-UKWR-019-L (15mm push fit x M10) - Bore size DN10. DG10E-UKWR-020-L (15mm push-fit x M12) - Bore size DN10. DG10E-UKWR-021-L (15mm push-fit x F ¾" BSP) - Bore size DN10. DG10E-UKWR-022-L (15mm push fit x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-023-L (15mm push-fit x 15mm compression) - Bore size DN10. DG10E-UKWR-024-L (15mm push-fit x 15mm push fit) - Bore size DN10. DG10E-UKWR-025-L (F ¾" BSP x F ¾" BSP) - Bore size DN13. DG10E-UKWR-026-L (22mm compression x 22mm compression) - Bore size DN13. DG10E-UKWR-029-L (F ½” x M10) - Bore size DN8. DG10E-UKWR-030-L (F ⅜” x M10) - Bore size DN8. DG10E-UKWR-031-L (15mm compression iso valve x 15mm compression) - Bore size DN10. DG10E-WRAS-034-L (F3/4” x F3/4” elbow) - Bore size DN10. DG10E-QY-007-L (F ⅜” x F⅜”) - Bore size DN8. DG10E-QY-008-L (F⅜” x F⅜” elbow) - Bore size DN8. DG10E-834-001-L (F⅜" X F¼") - Bore size DN8. DG10E-UKWR-032-L (F½" x M½") - Bore size DN13, DG10E-UKWR-033-L (15mm x M½") - Bore size DN13, DG10E-UKWR-035-L (F¾" x M¾") - Bore size DN13 & DG10E-UKWR-036-L (F½" x F½" Elbow) - Bore size DN10. DG10E-WRAS-038-L (F½" x M½") - Bore size DN8 DG10E-XC-002-L (F½" BSP X F½" BSP) - Bore size DN8 DG10E-A007010-028-L(F1/2”X15mm compression iso valve)-Bore size DN13 DG10E-EWT-003-L(F1/2”XF1/2”)-Bore size DN13 DG10E-A007010-027-L(F1/2”X15mm)-Bore size DN13 DG10E-A007119-019-L(22mm X 22mm with iso valve)-Bore size DN13 DG10E-A007010-037-L(15mm X 15mm)-Bore size DN13 DG10E-A007010-013-L(15mm X M12x1 Short)-Bore size DN10 DG10E-SCS-001-L(F1/2”X14.7mm with iso valve) - Bore size DN10 DG10E-SCS-002-L(F3/4”X21mm with iso valve)-Bore size DN13 DG10E-A007010-014-L(15mm X M12x1 Long)-Bore size DN10 DG10E-TECH-001-L (F1/2"XM12)-Bore size DN8.

Approval Holder:: Fanski Group Inc

Company Name
Fanski Group Inc
Address
Mechanical and Electrical Industrial Zone, Zhugang Town, Yuhuan County, Taizhou City, Zhejlang
Country
China

View All Listings by this Company
Manufacturer:: Fanski Group Inc

Company Name
Fanski Group Inc
Address
Mechanical and Electrical Industrial Zone, Zhugang Town, Yuhuan County, Taizhou City, Zhejlang
Country
China

View All Listings by this Company

WRAS Approval Number: #2103345

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103345
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: MSL, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: BFFTCW-1510 BFFTCW-1510500 BFFTCW-1512 BFFTCW-1512500 BFFTCW-10D500 BFFTCW-10D900 BFFTCW-12D500 BFFTCW-12D900 BFFTCW-DD500 BFFTCW-DD900 BFFTCWIV-10D300 BFFTCWIV-12D300 BFFTCW-1515300 BFFTCW-1515500 BFFTCW-1515900 BFFTCW-15D300 BFFTCW-15D500 BFFTCW-15D900 BFFTCW-15E300 BFFTCW-15E500 BFFTCW-15E900 BFFTCW-2222300 BFFTCW-2222500 BFFTCW-22E300 BFFTCW-22E500 BFFTCW-22E900 BFFTCWIV-15D150 BFFTCWIV-15D300 BFFTCWIV-15D500 BFFTCWIV-15E300 BFFTCWIV-15E500 BFFTCWIV-22E30

Approval Holder:: Navigator MSL Ltd

Company Name
Navigator MSL Ltd
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234

View All Listings by this Company

WRAS Approval Number: #2012115

Multi-layer shower hose with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012115
Size:: See model
Marking:: Intatec Logo, WRAS and date of manufacture (MM/YY) on captive nut.
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: 800030CP - ½” BSP (F) conical or captive nut.

Approval Holder:: Intatec Ltd

Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company

WRAS Approval Number: #2306071

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2306071
Size:: Please refer to model.
Marking:: Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: C54400 *CB WRAS 30CM FLEX TAP CONNS 15mm X F ½" BSP C54401 *CB WRAS 30CM FLEX TAP CONNS 15mm X F ¾" BSP C54402 *CB WRAS 30CM FLEX TAP CONNS 22mm X F ¾" BSP C54403 *CB WRAS 50CM FLEX TAP CONNS 15mm X F ½" BSP C54404 *CB WRAS ISO FLEX TAP CONS 15mm iso valve x F ½"BSP C54405 *CB WRAS ISO FLEX TAP CONS 15mm iso valve x F ¾" BSP C54406 *CB WRAS ISO FLEX TAP CONS 22mm iso valve x F ¾" BSP C54412 *CB WRAS M10 MONO FLEX TAP CONNS 15mm x M10 C54413 *CB WRAS M12 MONO FLEX TAP CONNS 15mm x M12 C54414 *CB WRAS 30CM FLEX TAP CONNS 15mm x 15mm

Approval Holder:: Wolseley UK

Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company
Manufacturer:: Fanski Group Inc

Company Name
Fanski Group Inc
Address
Mechanical and Electrical Industrial Zone, Zhugang Town, Yuhuan County, Taizhou City, Zhejlang
Country
China

View All Listings by this Company

WRAS Approval Number: #2306072

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2306072
Size:: Please refer to model.
Marking:: FLOMASTA (Brand of Kingfisher), WRAS and date of manufacture (YYYY) on crimped sleeve. Models added December 2023 Flomasta or Kingfisher, WRAS and date of manufacture (YYYY) on crimped sleeve.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: 05272204 (15mm compression x M10) - Bore size DN8. 05272198 (15mm compression x M12) - Bore size DN8. 05272310 (F ½" BSP X F ½" BSP) - Bore size DN10. 05272174(15mm compression iso valve x F ½"BSP) - Bore size DN10. 5052931708345 (22mm compression iso valve x F ¾" BSP) - Bore size DN13. 05272150, 05272167 (22mm x F ¾" BSP) - Bore size DN13. 05272181 (15mm compression x F ⅜" BSP) - Bore size DN10. 05272228 (15mm compression x F ½" BSP) - Bore size DN10. 05272402 (15mm compression x 10mm compression) - Bore size DN10. 05272242 (15mm compression x 15mm compression) - Bore size DN10. 05272327 (15mm compression x F ¾" BSP) - Bore size DN10. 05272280 (15mm compression x 22mm compression) - Bore size DN10. 5052931708352 (15mm compression iso valve x F ¾" BSP) - Bore size DN10. Models Added December 2023: 05272334, 05272372, 05272396 (22mmxF3/4" BSP)-Bore size DN13. 5052931675531,, 05272303, 05272358, 05272389, 5052931675548 (15mm compression xF½"BSP)- Bore size DN10. 05272365 (15mm compressionxF"BSP) Bore size DN10. 5052931462629, 05272273, 05272341(15mm compressionx15mm compression)- Bore size DN10. 052804690 (F ½"BSPXF½"BSP)-Bore size DN10. 05272266 (15mm compression iso valve xF½"BSP)- Bore size DN10.

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

WRAS Approval Number: #2303074

Range of shower hoses with TPE linings and EPDM ‘O’-rings. Maximum operating temperature 60°C. Open outlet use only.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2303074
Marking:: Hansgrohe on conical nut.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: 30 334 118 Hansgrohe Metaflex'C 800mm chrome, 28 152 xxx Hansgrohe Mariflex showerhose 1250mm, 28 262 xxx Hansgrohe Metaflex C showerhose 1250mm chrome, 28 644 xxx Hansgrohe Metaflex Shower hose 1250mm, 30 475 518 Hansgrohe Metaflex C showerhose 1250mm, 28 153 xxx Hansgrohe Mariflex showerhose 1500mm, 28 263 xxx Hansgrohe Metaflex C showerhose 1500mm, 28 645 xxx Hansgrohe Metaflex Shower hose 1500mm, 28 266 xxx Hansgrohe Metaflex C showerhose 1600mm chrome, 30 475 618 Hansgrohe Meta showerhose 1600mm, 31 475 618 Hansgrohe Metaflex C 1600mm, 28 155 xxx Hansgrohe Mariflex showerhose 1750mm, 28 265 xxx Hansgrohe Metaflex C showerhose 1750mm, 28 646 xxx Hansgrohe Metaflex Shower hose 1750mm, 30 511 718 Hansgrohe Metaflex showerhose 1750mm, 28 154 xxx Hansgrohe Mariflex showerhose 2000mm, 28 264 xxx Hansgrohe Metaflex C showerhose 2000mm chrome, 28 647 xxx Hansgrohe Metaflex Shower hose 2000mm.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2309035

Range of shower hoses. Model ML-PVC-DCHS01-XX is a PVC hose incorporating EPDM, NBR or Silicone seals. Model ML-SS-SKHS01-XX is a PVC or EPDM lined shower hose incorporating EPDM, NBR or silicone seals with a stainless-steel interlocked outer with (various finishes).

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2309035
Size:: ½” BSP (F)
Marking:: Milan logo, WRAS and date of manufacture on ferrule (YYYY/MM/DD)
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: ML-PVC-DCHS01-XX ML-SS-SKHS01-XX ML-SS-SKHS01-XX XX denotes 01-Golden 02-black 03-Cr-Plated 04-Natural Surface colour and its connectors as below: G1/2, M15X1 ML-PVCDCHS01-XX XX denotes 01-Brushed Gold 02-Silver 03-Black and with connector G1/2”.

Approval Holder:: Ningbo Milan Sanitary Ware Technology Co., Ltd.

Company Name
Ningbo Milan Sanitary Ware Technology Co., Ltd.
Address
West of No. 18, West Industrial Zone 1st Road, Lubu Town, Yuyao City Ningbo,Zhejiang,China

View All Listings by this Company

WRAS Approval Number: #2309310

Range of Stainless steel braided EPDM lined flexible hose assemblies with a variety of brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature: 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2309310
Size:: see model
Marking:: Leading, WRAS, Year of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: LEADING-EPDM-DN8 Available with connections: G3/8(F), G1/2(F), M8x1, M10x1, M12x1, G1/2(M), 15mm LEADING-EPDM-DN10 Available with connections: G3/8(F), G1/2(F), G3/4(F), M10x1, G1/2(M), 15mm LEADING-EPDM-DN13 Available with connections: G1/2(F), G3/4(F), G3/4(M)

Approval Holder:: Zhejiang Leading Plumbing Co., Ltd

Company Name
Zhejiang Leading Plumbing Co., Ltd
Address
No. 550, Jixin Road, Xinqiao, Taizhou, Zhejiang, China

View All Listings by this Company
Manufacturer:: Zhejiang Leading Plumbing Co., Ltd

Company Name
Zhejiang Leading Plumbing Co., Ltd
Address
No. 550, Jixin Road, Xinqiao, Taizhou, Zhejiang, China

View All Listings by this Company

WRAS Approval Number: #2309025

Qualflex classic range of stainless steel braided EPDM lined flexible hoses incorporating EPDM O-rings. Maximum working pressure at 20°C ,10.0bar and maximum working pressure at 65°C , 6.0bar. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2309025
Size:: See models
Marking:: Qualflex, QWRAS, Pressure, temp and date of manufacture (YYM YY = year code and M = month code, A-Jan, B-Feb etc) on ferrule.
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: FH10 – 15mm pushfit x ½” BSP captive nut FH12 – 15mm pushfit x ¾” BSP captive nut FH20 – 22mm pushfit x ¾” BSP captive nut FH15 – 15mm pushfit x 15mm pushfit FH22 – 22mm pushfit x 22mm pushfit FV15 – 15mm pushfit x 15mm pushfit

Approval Holder:: Hydralectric Ltd.

Company Name
Hydralectric Ltd.
Address
5 High Road Byfleet Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company
Manufacturer:: Hydralectric Ltd.

Company Name
Hydralectric Ltd.
Address
5 High Road Byfleet Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

WRAS Approval Number: #2310102

‘Comfortflex’ range of silver braided shower hoses with a TPE inner hose and EPDM seals.Open outlet

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2310102
Size:: ½” BSP captive nut.
Marking:: Hansgrohe on nut.
Installation Requirements:: R001
Expiry date:: 31/10/2028
Model:: 28 167 002, 28 167 xx0, 28 168 xx0, 28 169 002, 28 169 xx0, 28 162 002, 28 160 002. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2110140

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2110140
Size:: See model
Marking:: Tenby, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve.
Installation Requirements:: R001
Expiry date:: 31/10/2026
Model:: AX-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. AX-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. AX-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. AX-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. AX-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. AX-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. AX-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). AX-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). AX-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). AX-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). AX-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. AX-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. AX-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. AX-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. AX-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. AX-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). AX-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). AX-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. AX-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. AX-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. AX-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. AX-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. AX-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit AX-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. AX-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. AX-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). AX-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). AX-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Approval Holder:: Tenby Imports & Exports Ltd.

Company Name
Tenby Imports & Exports Ltd.
Address
Unit 1 Crown House, Otterspool Way, Watford, Hertfordshire
Postcode
WD25 8HL

View All Listings by this Company

WRAS Approval Number: #2103347

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103347
Size:: CMFTCW-1510300 - 15mm compression x M10 CMFTCW-1512300 - 15mm compression x M12 CMFTCW-1515300 - 15mm compression x 15mm compression CMFTCW-15D300 - F1/2 x 15mm compression CMFTCW-15D500 - F1/2 x 15mm compression CMFTCW-15E300 - F3/4 x 15mm compression CMFTCW-22E300 - F3/4 x 22mm compression CMFTCWIV-15D300 - F1/2 x 15mm isolation valve CMFTCWIV-15E300 - F3/4 x 15mm isolation valve CMFTCWIV-22E300 - F3/4 x 22mm isolation valve CMFTCWP-15E300 - F3/4 x 15mm pushfit (used with copper tube manufactured to BS2871)
Marking:: MB (Brand of Navigator) WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: CMFTCW-1510300, CMFTCW-1512300, CMFTCW-1515300, CMFTCW-15D300, CMFTCW-15D500, CMFTCW-15E300, CMFTCW-22E300, CMFTCWIV-15D300, CMFTCWIV-15E300, CMFTCWIV-22E300 & CMFTCWP-15E300

Approval Holder:: Navigator MSL Ltd

Company Name
Navigator MSL Ltd
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234

View All Listings by this Company

WRAS Approval Number: #2310014

Stainless steel braided, PEX lined flexible hose assemblies with EPDM washers and O ring incorporating an isolation valve (brass body and ball), tee piece (brass) and incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2310014
Size:: Stainless steel braided, PEX lined flexible hose assembly incorporating 3/8" BSP split nut x 3/8" spigot end connection.
Marking:: IDC (E) logo, size, temperature and pressure on hose sleeve.
Installation Requirements:: R001 R008
Expiry date:: 31/10/2028
Model:: 322-1175.

Approval Holder:: IDC Fluid Control Co., Ltd.

Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: IDC Fluid Control Co., Ltd.

Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2103346

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103346
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: MB (Brand of Navigator used under license by Wolseley), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: 236550, 236548, 236543, 236547, 236551, 236545, 236549, 236542, 236541, 236544 & 236546

Approval Holder:: Wolseley UK

Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

WRAS Approval Number: #2312018

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections (see models). Some models incorporate a screwdriver operated isolation valve. All compression and push-fit connections are for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2312018
Size:: See Model list. Note, for the connection sizes listed in the models below, use the following key: XXMM = XXmm compression, MXXx1 = MXXx1 (M) FXX” = XX” BSP (F) XXmm Pushfit = XXmm Pushfit
Marking:: Dingbo logo, WRAS and Date of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: Model Code/Number (Connection Size) DB8MM-15MM×M10L (15MM × M10x1) DB8MM-15MM×M10S (15MM × M10×1) DB8MM-1/2×M10L (F1/2" × M10×1) DB8MM-1/2×M10S (F1/2" × M10×1) DB9MM-1/2×1/2 (F1/2" × F1/2") DB9MM-1/2×M12L (F1/2" × M12×1) DB9MM-1/2×M12S (F1/2" × M12×1) DB9MM-15MM×M12L (15MM × M12×1) DB9MM-15MM×M12S (15MM × M12×1) DB9MM-1/2×15MM (F1/2" × 15MM) DB9MM-15MM×15MM (15MM × 15MM) DB9MM-3/4×15MM (F3/4" × 15MM) DB9MM-1/2×15MMV (F1/2" × 15MM with VALVE) DB9MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-1/2×1/2 (F1/2" × F1/2") DB12MM-1/2×15MM (F1/2" × 15MM) DB12MM-15MM×15MM (15MM × 15MM) DB12MM-3/4×15MM (F3/4" × 15MM) DB12MM-3/4×22MM (F3/4" × 22MM) DB12MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-3/4×22MMV (F3/4" × 22MM with VALVE) DB19MM-3/4×22MM (F3/4" × 22MM) DB19MM-3/4C×22MM (F3/4" × 22MM) DB12MM-1/2 x 15mm Push- fit (F1/2" × 15mm Pushfit) DB12MM-3/4 x 15mm Push- fit (F3/4" × 15mm Pushfit) DB12MM-1/2 x 15mm Push- fit VALVE (F1/2" × 15mm Pushfit with VALVE) DB12MM-3/4 x 15mm Push- fit VALVE (F3/4" × 15mm Pushfit with VALVE) DB12MM-1/2 x 22mm Push- fit (F1/2" × 22mm Pushfit) DB12MM-3/4 x 22mm Push- fit (F3/4" × 22mm Pushfit) DB12MM-1/2 x 22mm Push- fit VALVE (F1/2" × 22mm Pushfit with VALVE) DB12MM-3/4 x 22mm Push- fit VALVE (F3/4" × 22mm Pushfit with VALVE) DB12MM-15mm Push-fit x 15mm Push-fit (15mm Pushfit × 15mm Pushfit) DB12MM-22mm Push-fit x 22mm Push-fit (22mm Pushfit × 22mm Pushfit) Note, any models with either ‘VALVE’ or ‘V’ on the end of the model name incorporate a screwdriver operated isolation valve.

Approval Holder:: Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Company Name
Zhejiang Dingbo Plumbing Manufacturing Co Ltd
Address
No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company
Manufacturer:: Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Company Name
Zhejiang Dingbo Plumbing Manufacturing Co Ltd
Address
No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company

WRAS Approval Number: #2312069

Hydravend range of PVC coated (grey or white in colour), hytrel lined, flexible thermoplastic hoses, incorporating a white quadruple layered hose with a black TPE inner lining. The hoses are supplied with plastic or brass end connectors and with or without servicing valves. Maximum working pressure and temperature: 12.0 bar Cold water use only.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2312069
Size:: DN06, DN08, DN10, DN12
Marking:: Qualiflex logo, QWRAS, Temperature, Pressure and date of manufacture (YY) on Ferrule
Installation Requirements:: R001 R008
Expiry date:: 31/12/2028
Model:: 06HV 08HV 10HV 12HV Hose assembly part number follows the below format: (The example given is for a Ø6mm internal diameter, Hydravend Range, 900mm overall length, female to male fittings) DDHHLLLFNN Where DD = diameter HH = Hose type LLL = Length FF where each F = Fitting code covering type, size and material. (M = Male, F = Female, D = Compression, S = Standpipe, E = Elbow, J = JG Fitting & P = Qualflex pushfit) NN = Number

Approval Holder:: Hydralectric Ltd.

Company Name
Hydralectric Ltd.
Address
5 High Road Byfleet Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company
Manufacturer:: Hydralectric Ltd.

Company Name
Hydralectric Ltd.
Address
5 High Road Byfleet Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

WRAS Approval Number: #2312077

Range of shower hoses with a rubber outer layer (various finishes, see models) and either PVC or PEX inner liner (see models), EPDM or NBR O-rings (see models) and either brass or stainless-steel connectors (see models). Open Outlet use only. Maximum operating temperature 85.0°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2312077
Size:: See model
Marking:: HRN (trademark), WRAS and manufacturing date (MM/YY) on the ferrule.
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: Model Code: 17X-XXX-X-X-X-X The ‘X’s denote multiple parts of the assembly, and are explained below: 1st ‘X’ denotes the DN and can be replaced with: 0 = DN8, 1 = DN10 2nd, 3rd & 4th ‘X’s denotes the length and can be replaced with, as examples: 30 = 30cm Length (Shortest Hose) 300 = 300cm Length (Longest Hose) 5th ‘X’ denotes the colour and can be replaced with: 1 = Black, 2 = White, 3 = Silver, 4 = Rose, 5 = Golden, 6 = Gray. 6th ‘X’ denotes the inlet size and can be replaced with: 1 = ½” BSP (F) Conical Nut, 2 = M20 (F) Conical Nut, 3 = M19 (F) Conical Nut, 4 = M18 (F) Conical Nut. 7th ‘X’ denotes the outlet size and can be replaced with: 1 = ½” BSP (F) Conical Nut, 2 = M20 (F) Conical Nut, 3 = M19 (F) Conical Nut, 4 = M18 (F) Conical Nut. 8th ‘X’ denotes the inner tube material and can be replaced with: 1 = PVC, 2 = PEX.

Approval Holder:: APIS (Xiamen) Co., Ltd.

Company Name
APIS (Xiamen) Co., Ltd.
Address
1F, 5F, Main building No 198-204 YingYao Road
Country
Jimei District

View All Listings by this Company
Manufacturer:: APIS (Xiamen) Co., Ltd.

Company Name
APIS (Xiamen) Co., Ltd.
Address
1F, 5F, Main building No 198-204 YingYao Road
Country
Jimei District

View All Listings by this Company