TEST SITE

Combination Tap Assemblies

Section Code 0470 : Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#2010074

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010074
Size:
15mm Copper Tails.
Marking:
Blanco on front of tap body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
BM1606 Blanco Cadet.
Product Images
Approval Holder:
Blanco Limited
Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

Print This Approval

#2010300

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Model 1002137653_N199998998 is supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010300
Size:
Stainless steel braided EPDM lined hose assemblies with 3/8” captive nut end connections.
Marking:
NK Porcelanosa on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
100237653_N199998998 100237663_N199999000
Product Images
Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2
Country
Spain

View All Listings by this Company

Print This Approval

#2010322

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010322
Size:
15mm copper tails.
Marking:
DTC32A (brand of Methven) on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
ADORE171/EK
Product Images
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2010323

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass). Incorporation a ceramic disc headwork with dome type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010323
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
207121
Product Images
Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2010324

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a non-rising spindleheadwork with crosstop type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010324
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
197021
Product Images
Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2010325

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a ceramic disc headwork with lever type operating members.The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010325
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
207125
Product Images
Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2010356

Single hole, wall mounted single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating arising spindle headworks and cross top operating member. Maximum working pressure 8.6 bar. Maximum operating temperature 85°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010356
Size:
¾” BSP (M).
Marking:
Encore logo (brand of CHG Europe B.V.) & KW35 series on body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2025
Model:
KW35-9006
Product Images
Approval Holder:
CHG Europe B.V.
Company Name
CHG Europe B.V.
Postcode
THE NETHERLANDS

View All Listings by this Company

Print This Approval

#2106802

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2106802
Size:
Stainless steel braided, PEX lined hose assembly with 3/8” captive nut connections.
Marking:
Grohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2026
Model:
Eurocube 31.255
Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval

#2010360

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010360
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” (M) end connection.
Marking:
SMR on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
Cubic Quadrant Single Lever New Media ACT2087
Product Images
Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray (BI)
Country
Italy
General Email

View All Listings by this Company

Print This Approval

#2010382

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010382
Size:
Stainless steel braided EPDM lined hose assemblies incorporating 3/8” captive nut end connections and supplied with ½” adaptors.
Marking:
COMAP on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
922100 – Jeroni horizontal twin handle 922106 – Jeroni horizontal single handle 922113– Jeroni Swan twin handle 922119 – Jeroni Swan single handle 922126 – Jeroni Swept twin handle 922132 – Marata Single handle
Product Images
Approval Holder:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Country
United Kingdom
Phone
01942 265230

View All Listings by this Company

Print This Approval

#2007374

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes, see model). Incorporating ceramic cartridge headworks and various operating members. The spout outlet incorporates a plastic aerator. Product is supplied with a click type waste. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007374
Size:
Stainless steel braided EPDM lined hose assemblies incorporating 3/8” captive nut end connections.
Marking:
THG logo on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2025
Model:
6500D/W : Single lever basin mixer and click waste 6500/W : Single lever basin mixer high spout and click waste 6500SV/W : Single lever basin mixer high spout without click waste Styles Click waste G7E-Dean, G8A-Les Ondes, G8B-Les Ondes à manettes, A02 – Polished Chrome, C02 – Matt Chrome, C03 – Satin Chrome, G02 – Polished Chrome/Polished Gold, F18 – Rhodium Silver, F19 – Matt Rhodium Silver, H03 – Varnished Antique Silver, H08 – Varnished Matt Antique Silver, B01 – Polished Nickel, C01 – Matt Nickel, G01 – Polished Nickel/Polished Gold, E02 – Matt Nickel/Polished Gold, D01 – Varnished Clear Bronze, D05 – Varnished Matt Bronze, H24 – Varnished Antique Red Copper, H07 – Matt Antique Red Copper, H44 – Polished Luxbrass, H16 – Matt Luxbrass, H12 – Satin Luxbrass, F01 – Polished Gold, F02 – Matt Gold, F27 - Rose Gold, F23 - PVD aspect chrome, H50 - PVD aspect laiton mat, F33 - PVD brown bronze colour, F34 - PVD brown bronze colour – mât, F35 - PVD brown bronze colour – satiné, H52 - PVD couleur doré, H53 - PVD couleur doré mat, H54 - PVD couleur doré satiné, H49 - PVD couleur laiton, H51 - PVD couleur laiton satiné, H55 - PVD couleur nickel, H56 - PVD couleur nickel mat, H57 - PVD couleur nickel satiné ,F20 - PVD DORE A complete model number compiles of a three digit code from each section above, for example G7E-A02.6500D/W. This would give you Dean style and polished chrome finish single lever basin mixer and click waste
Product Images
Approval Holder:
THG
Company Name
THG
Address
35, rue Tournière - BP 80212 Béthencourt sur Mer 80535 Friville cedex
Country
France
Phone
+33 3.22.60.20.80

View All Listings by this Company
Manufacturer:
THG
Company Name
THG
Address
35, rue Tournière - BP 80212 Béthencourt sur Mer 80535 Friville cedex
Country
France
Phone
+33 3.22.60.20.80

View All Listings by this Company

Print This Approval

#2009301

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating 3x quarter turn ceramic disc headworks with single lever operating members. The third ceramic disc headwork on the front of the tap body is intended to control the flow for a filtered water supply. The inlet to the cold supply incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic Aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009301
Size:
Hot: Stainless steel braided EPDM lined flexible hose assembly incorporating a ½” captive nut end connection. Cold: Stainless steel braided EPDM lined flexible hose assembly incorporating a ½” BSP (M) end connection.
Marking:
SMR and Abode on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2025
Model:
Orcus Aquifer
Product Images
Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval

#2010362

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic disc headwork and single lever operating member. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010362
Size:
Polyamide (PA) braided PEX lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
Marking:
Grohe, design and engineering, Grohe Germany, date of manufacture (YYMM), Grohe ID plant, made in label etched on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2025
Model:
30.335.001 StartLopp OMH sink mixer (chrome plated). 30.335.DC1 StartLopp OMH sink mixer (supersteel coloured).
Product Images
Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval

#2010328

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010328
Size:
15mm copper tails.
Marking:
DEVA on front of body. DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
CONV130 Converse mono sink mixer.
Product Images
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2006365

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating ceramic cartridge headworks and single lever operating member. The connection to flexible hose and spray outlets incorporates an approved single check valve cartridge (however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection) the outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006365
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC25 (brand of Methven) & Methven (models added August 2023) on body.
Installation Requirements:
R001 R006 R009 r010
Expiry date:
30/06/2025
Model:
ELSMCP, ELSMBK & MASMCP COMBINATION TAP ASSEMBLIES MODELS ADDED AUGUST 2023: INST-MCP-1HKM & INST-MCF-1HKM
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2011024

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating either a ceramic cartridge headwork (models SH2CP/SH2BN), or quarter turn ceramic disc headwork (all other models) and single lever operating members. The spout outlets of all models incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011024
Size:
M10
Marking:
Clearwater on base of body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
Rococo: RO81062CP - Chrome plating. RO81062BN - Brush nickel. RO81062AB - Brush gold. RO81062BV - ORB. RO81062RC - Brush brass. Savita: SA2CP - Chrome plating. SA2BN - Brush nickel. Tutti: TU81073CP - Chrome plating. TU81073BS - Brush nickel. TU81073AB - Brush gold. TU81073BV - ORB. TU81073RC - Brush brass. Vitro: VITCP - Chrome plating. VITBS - Brush nickel.
Product Images
Approval Holder:
Clearwater Products
Company Name
Clearwater Products
Address
Unit 5603 Shannon Place, Tewkesbury Business Park, Tewkesbury
Postcode
GL20 8SL
Country
Gloucestershire
Phone
01684 299555

View All Listings by this Company

Print This Approval

#2011302

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporates a plastic flow straightner. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011302
Size:
Supplied with stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” BSP (M)captive nut.
Marking:
MB on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
110102 & 110090
Approval Holder:
Quanzhou Mayfair Brassware Co., Ltd.
Company Name
Quanzhou Mayfair Brassware Co., Ltd.
Address
No. 508 Huyue Building, Huxin Street, Quanzhou
Country
Fujian,

View All Listings by this Company
Manufacturer:
Kaiping City Mayfair Brassware Industry Co. Ltd.
Company Name
Kaiping City Mayfair Brassware Industry Co. Ltd.
Postcode
CHINA 362000

View All Listings by this Company

Print This Approval

#2011328

Single hole, single outlet (swivel) combination tap assembly (chromium plated stainless steel) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011328
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
MOD Industry on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2025
Model:
AA030108
Product Images
Approval Holder:
MOD Industry (shanghai) Co, Ltd.
Company Name
MOD Industry (shanghai) Co, Ltd.

View All Listings by this Company
Manufacturer:
Heshan City Zhishan Town Shengjia Sanitary Hardware Products Factory.
Company Name
Heshan City Zhishan Town Shengjia Sanitary Hardware Products Factory.

View All Listings by this Company

Print This Approval

#2011338

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011338
Size:
Stainless steel braided PEX lined flexible inlet hoses assemblies incorporating 3/8” captive nut end connection.
Marking:
Franke on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2025
Model:
27808411 27808412 27808413 27808415 27808416 27808417 27808418 27808421
Product Images
Approval Holder:
Franke Sourcing (Heshan) Company Limited.
Company Name
Franke Sourcing (Heshan) Company Limited.

View All Listings by this Company
Manufacturer:
Xiamen Solex High-Tech Industries Co., Ltd
Company Name
Xiamen Solex High-Tech Industries Co., Ltd
Address
No. 298 Yangguang Road West Xinyang Industrial Zone Haicang District Xiamen, Fujian
Country
China

View All Listings by this Company

Print This Approval

#2011360

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporates a plastic flow straightner. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011360
Size:
Supplied with stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” BSP (M)captive nut.
Marking:
CRW on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
KTN001 DAKOTA & KTN301 OREGON COMBINATION TAP ASSEMBLIES
Approval Holder:
CRW TRADING LTD
Company Name
CRW TRADING LTD
Postcode
TO8 9HP

View All Listings by this Company

Print This Approval

#2010402

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010402
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” (M) end connection.
Marking:
CDA on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
TV9 COMBINATION TAP ASSEMBLIES
Approval Holder:
CDA Group (The)
Company Name
CDA Group (The)
Address
Harby Road, Langar, Nottinghamshire
Postcode
NG13 9HY

View All Listings by this Company

Print This Approval

#2010403

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a non-rising spindleheadwork with crosstop type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010403
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
ebb & flo on tap base
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
49944
Approval Holder:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN
Country
SOMERSET

View All Listings by this Company

Print This Approval

#2010404

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass). Incorporation a ceramic disc headwork with dome type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010404
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
ebb & flo on base of tap
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
88081 COLWELL MONO MIXER COMINATION TAP ASSEMBLY
Approval Holder:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN
Country
SOMERSET

View All Listings by this Company

Print This Approval

#2010405

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a ceramic disc headwork with lever type operating members.The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010405
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
ebb & flo on base of tap
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
26251 Seaton Mono Mixer Kitchen COMINATION TAP ASSEMBLY
Approval Holder:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN
Country
SOMERSET

View All Listings by this Company

Print This Approval

#2012046

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout incorporates a plastic aerator, model BM1400 Blanco Crest incorporates a plastic flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 60˚C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012046
Size:
15mm copper tails.
Marking:
Blanco on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2025
Model:
BM1400 Blanco Crest BM1403 Blanco Crest BM1406 Blanco Crest
Product Images
Approval Holder:
Blanco Limited
Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

Print This Approval

#2012059

Range of single-hole, single outlet, (swivel) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator and the inlets incorporate a stainless-steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012059
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Blanco on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2025
Model:
Kano 521502 Kano 525028 Kano 525029 Kano 525030 Kano 525031 Kano 525032 Kano 525033 Kano 525034 Kano 525035 Kano 526175 Kano 525036 Finishes available are; Anthracite/chrome, rock grey/chrome, alu metallic/chrome, pearl grey/chrome, white/chrome, jasmine/chrome, champagne/chrome, tartufo/chrome, coffee/chrome, black/chrome
Product Images
Approval Holder:
Blanco Limited
Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

Print This Approval

#2012060

A range of single-hole, single outlet, (swivel) combination tap assemblies with brass bodies (chromium plated). Incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar, Maximum working temperature 60 °C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012060
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” BSP captive nut.
Marking:
Blanco on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2025
Model:
523286-DARAS TP HD CHR ARMATUR 526360-DARAS TP 3L CHR ARMATUR 526361-DARAS TP 6L CHR ARMATUR
Product Images
Approval Holder:
Blanco Limited
Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

Print This Approval

#2012061

Range of single hole, single outlet, (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate a combined stainless-steel strainer and silicone washer. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012061
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a 3/8” BSP captive nut.
Marking:
Blanco on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2025
Model:
MILA MIDA MILI
Product Images
Approval Holder:
Blanco Limited
Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

Print This Approval

#2011305

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Models SM056, SM056F, SM056/501, SM056/NI & SM056/BZ incorporate ceramic cartridge headworks with single lever operating members. Models SM057 & SM057/501 incorporate non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011305
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections or 15mm copper tails.
Marking:
DTC34 (brand of Methven) on rear of body (models SM057 & SM057/501) DTC34 (brand of Methven) on rear of body and Deva on front of body (all other models).
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
Georgian flexi tails: SM056F Georgian 15mm copper tails: SM056 SM056/501 SM056/NI SM056/BZ Venetian 15mm copper tails: SM057 SM057/501
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2011364

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011364
Size:
Stainless steel braided PEX lined flexible inlet hoses assemblies incorporating 3/8” captive nut end connection.
Marking:
Franke on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2025
Model:
115.0623.054, 115.0623.056, 115.0623.058, 115.0623.132, 115.0623.135, 115.0623.137, 115.0623.140 & 115.0623.146 COMBINATION TAP ASSEMBLIES
Approval Holder:
Franke Kitchen System Ltd
Company Name
Franke Kitchen System Ltd
Address
Franke Strasse 2 CH-4663 Aarburg
Country
Switzerland

View All Listings by this Company

Print This Approval

#2012901

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass), incorporating quarter turn ceramic disc headwork. The spout outlet incorporates a plastic flow straightener and the product is supplied with single check valve assemblies (verified by test as suitable for backflow protection against Fluid Category 2) with integral servicing valve for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012901
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Bristan Easifit on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2025
Model:
QST SNK EF C QST SNK EF C TO (tap only)
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2012902

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass), incorporating quarter turn ceramic disc headwork. The spout outlet incorporates a plastic flow straightener and the product is supplied with single check valve assemblies (verified by test as suitable for backflow protection against Fluid Category 2) with integral servicing valve for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012902
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Bristan Easifit on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2025
Model:
DUL SNK EF C DUL SNK EF C TO (tap only)
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2012909

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass), incorporating quarter turn ceramic disc headwork. The spout outlet incorporates a plastic flow straightener and the product is supplied with single check valve assemblies (verified by test as suitable for backflow protection against Fluid Category 2) with integral servicing valve for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012909
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Bristan Easifit on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2025
Model:
MZ SNK EF C MZ SNK EF C TO (tap only) MZ SNK EF BN MZ SNK EF BN TO (tap only)
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2012913

Range of single hole, single outlet (swivel) combination tap assemblies (brushed nickle or chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Supplied with single check valve assemblies (verified by test as suitable for backflow protection against Fluid Category 2) with integral servicing valve for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012913
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
‘Bristan’ on Body or Operating Member.
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2025
Model:
K SNKSL EF C K SNKSL EF C TO (tap only) RS SNKSL EF C RS SNKSL EF C TO (tap only)
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2012918

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated or brushed nickel coated brass), incorporating quarter turn ceramic disk headworks and single lever operating members . The spout outlet incorporates a plastic aerator. Supplied with single check valves with integral servicing valve for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012918
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Bristan on the body
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2025
Model:
EC SNK EF C EC SNK EF C TO EC SNK EF BN EC SNK EF BN TO
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2007388

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Inlets to the flexible inlet hoses incorporate single check valves (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007388
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Abode on operating member & tap front
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2025
Model:
GLOBE
Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company

Print This Approval

#2012357

Range of single hole, single outlet (swivel) combination tap assemblies (stainless steel bodies). The flow of hot and cold water is controlled by a ceramic cartridge headwork with single lever operating member. The flow of filtered water (filter not supplied) is controlled by a quarter turn ceramic disc headwork with a single lever operating member The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012357
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Brita logo on operating member. Production code (MM/YYYY) on label on cold water hose.
Installation Requirements:
R001 R006 R009 R010 R120 R150 R170
Expiry date:
31/12/2025
Model:
3-way tap rectangle: 1039050. 3-way tap round: 1039051.
Product Images
Approval Holder:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company

Print This Approval

#2101309

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101309
Size:
Grey polymeric (PET) braided PE-X lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Kohler on operating members
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2026
Model:
37316W-4-CP
Product Images
Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
+44 (0) 844 571 5000

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval

#2101319

Range of single hole, single outlet, (swivel) combination tap assemblies incorporating brass bodies (chromium plated) and quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101319
Size:
Stainless steel braided PEX lined hoseassembly incorporating ½” captive nut end connections.
Marking:
Deva on body. DTC53 (brand of Methven) on rear of the body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2026
Model:
PTN104 & WTN104 Walton Mono Kitchen Sink Mixer. Preston Mono Kitchen Sink Mixer. Model added September 2023: MAL104
Product Images
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2101321

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101321
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Vitra on operating member. Date of manufacture (WW/YY) on rear of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2026
Model:
A42156VUK – Sento sink mixer
Product Images
Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval

#2110802

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet can incorporate either a plastic flow straightener or a plastic aerator. When supplied with a plastic flow straightener there is a combined EPDM washer and stainless steel strainer behind it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110802
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2026
Model:
M9604 Models added September 2022 M9604 MBK1 M9604 BGP
Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2101012

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101012
Size:
Stainless steel braided, PEX lined flexible hose assemblies with a 10mm spigot end connection.
Marking:
Dornbracht on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2026
Model:
33800875, 33816875 & 33818875
Product Images
Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
Country
Germany
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
Country
Germany
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#2101016

A range of single-hole, single outlet, (swivel) combination tap assemblies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Models 71554XXX and 71564XXX are supplied with pop-up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101016
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connection.
Marking:
Hansgrohe on base of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2026
Model:
71554XXX - Vernis Blend. 71564XXX - Vernis Shape. 71870XXX - Vernis Blend M35. 71871XXX - Vernis Shape M35. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval

#2101034

A single-hole single outlet swivel combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101034
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 10mm spigot end connection.
Marking:
Dornbracht on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2026
Model:
33800790
Product Images
Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
Country
Germany
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
Country
Germany
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#2101047

A range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating either ceramic cartridge or quarter turn ceramic disc headwork with a single lever, cross top or dome type operating member. The spout outlets incorporate either a plastic flow straightener or aerator. Model SH-T81072 is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101047
Size:
M10 or M12 (F)
Marking:
QIXI & WRAS on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/01/2026
Model:
Ceramic cartridge headwork: SH-T8006 SH-T8026 SH-T81034 SH-T81037 SH-T81045 SH-T81063 SH-T81072 SH-T81084 Ceramic disc headwork: SH-T8106A SH-T8108 SH-T8162AW SH-T8162MW SH-T8162W SH-T8163A SH-T8163 SH-T80551L SH-T80551W SH-T80552L SH-T80691A SH-T80691L SH-T80691 SH-T81011 SH-T81023 SH-T81028A SH-T81028 SH-T81032A SH-T81032 SH-T81044 SH-T81069 SH-T81073 SH-T81077 SH-T81085
Product Images
Approval Holder:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company

Print This Approval

#2101049

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a rising spindle headwork with a single lever operating member. The spout outlets incorporate a plastic flow straighter and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101049
Size:
M10 - 9816-X ½” BSP (M) - 9812-X
Marking:
Top-Rinse and WRAS on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/01/2026
Model:
9816-X 9812-X X can be replaced by any of the following codes to determine the swivel radius of the spout: 06 = 6” 08 = 8” 10 = 10” 12 = 12” 14 = 14” 16 = 16” 18 = 18” P1 = 2-3/4” P2 = 2-11/16” P3 = 5-11/16” P4 = 7-3/4” P5 = 8-3/4” P6 = 12-1/4” 006DJ = 6” + 6” 007DJ = 6” + 9” 008DJ = 6” + 12” 009DJ = 12” + 12
Product Images
Approval Holder:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company
Manufacturer:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

Print This Approval

#2012063

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012063
Size:
Stainless-steel braided (DN8) PE-X lined flexible hose assembly with ½” captive nuts on model 62933-0001 Stainless-steel braided (DN6) PE-X lined flexible hose assembly with ½” captive nuts on model 62933-0101
Marking:
Lota on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2025
Model:
62933-0001 62933-0001 Chrome 62933-0101 62933-0101 Chrome
Product Images
Approval Holder:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval

#2012062

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members. The discharge is via the hand spray outlet or the infra-red controlled outlet on the swivel arm. The cold Inlet has a single check valve assembly (suitable for protection against fluid category 2 backflow). The spouts incorporate a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012062
Size:
½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
Marking:
Lota on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2025
Model:
63260-0001 Kitchen Mixer Chrome 63260-0004 Kitchen Mixer Brushed Nickel 63260-006801 Kitchen Mixer Matt Black 63260-004408 Kitchen Mixer Brushed Brass
Product Images
Approval Holder:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval

#2101900

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass), incorporating a two quarter turn ceramic disk headworks and cross top operating members. The spout outlet incorporates a flow straightener. Supplied with single check valves (suitable for backflow protection against Fluid Category 2) with integral servicing valve for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101900
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Bristan Easyfit on tap body
Installation Requirements:
R001 R006 R010
Expiry date:
31/01/2026
Model:
TNG EFSNK C TNG EFSNK C TO (tap only)
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2101904

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated or brushed nickel coated brass), incorporating two quarter turn ceramic disk headworks and lever operating members. The spout outlet incorporates a plastic aerator. Supplied with single check valves (suitable for backflow protection against Fluid Category 2) with integral servicing valve for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101904
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Bristan Easyfit on tap body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/01/2026
Model:
WIN EFSNK C WIN EFSNK C TO (Tap Only) WIN EFSNK C BN WIN EFSNK C BN TO (Tap Only)
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 2 of 7

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.