Water Regulations Approval Scheme Ltd

Bituminous Based Products

Section Code 5021 : Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

Back To Directory Sections

WRAS Approval Number: #2110505

'Electrocoat BP 116'. Factory applied, black coloured bitumen paint. Apply as per manufacturer's technical data sheet, document number 'ECL/TDS/BP116' dated 10th January 2016. Cure for 30 minutes@55°C and then 10 hours@23°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2110505
Expiry date:: 31/10/2026

Approval Holder:: Electrosteel Castings Ltd

Company Name
Electrosteel Castings Ltd
Address
30 B.T. Road PO Sukchar, District 24 Parganas (N) West Bengal, Kolkata - 700115
Country
743179

View All Listings by this Company

WRAS Approval Number: #2104556

'BPL HB QD Bitumen Black 60'. Factory applied, black coloured bituminous coating. Apply and cure as per manufacturer's data sheet number '671' dated 'Apr-20'. For use with water up to 60°C.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2104556
Expiry date:: 30/04/2026

Approval Holder:: Berger Paints India Limited

Company Name
Berger Paints India Limited
Address
14 & 15 Swarnamoyee Road, Howrah - 711103, West Bengal
Country
India

View All Listings by this Company

WRAS Approval Number: #2202503

‘Inertol BS10’. Factory applied, black coloured bitumen coating. Apply as per manufacturer’s technical data sheet 'no. 786.3' dated 2013-V2'. Cure for 5 hours@23°C or 30 minutes@50°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2202503
Expiry date:: 28/02/2027

Approval Holder:: Mäder Group

Company Name
Mäder Group
Address
Burschgrundstrasse 10-12, 45894 Gelsenkirchen
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2202508

‘Inertol BS10’. Factory applied, black coloured bitumen coating. Apply and cure as per manufacturer’s instructions 'BF-T06', issue number '03' dated 01.12.2021. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2202508
Expiry date:: 28/02/2027

Approval Holder:: Samsun Makina Sanayi A.S.

Company Name
Samsun Makina Sanayi A.S.
Address
Organize Sanayi Bolgesi, Yasar Dogu Caddesi, No. 33 P.K. 136
Country
55267 Kutlukent,

View All Listings by this Company

WRAS Approval Number: #2205506

'SOLID-02'. Factory applied, black coloured, bituminous coating. Apply as per manufacturer's user instructions 'File No.: SOLID-0069, Vison: SLD-03, Date of issue: 2015-01-01'. Cure for 2 hours @60°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2205506
Expiry date:: 31/05/2027

Approval Holder:: Shanxi Solid Industrial Co., Ltd.

Company Name
Shanxi Solid Industrial Co., Ltd.
Address
28F, No.8 Changxing South Street, Jinyuan District, Taiyuan, Shanxi
Country
China

View All Listings by this Company