TEST SITE

Heaters

Section Code 1365 : Electric instantaneous, open outlet, mains fed.

Back To Directory Sections

#2210067

Electric, instantaneous, vented, mains water heaters with plastic housings and silicon gaskets. Incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum working pressure 1.5 bar.

Non-metallic materials and components comply with BS6920 at 98°C

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2210067
Size:
½” BSP male inlet x 3/8” BSP male outlet.
Marking:
PROBOIL.2X on body. Pressure and model on adhesive label on rear of body.
Installation Requirements:
R001
Expiry date:
31/10/2027
Model:
PROBOIL.2X

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company

Print This Approval


#2210068

Electric, instantaneous, vented, mains water heaters with plastic housings and silicon gaskets. Maximum working pressure 1.5 bar.

Non-metallic materials and components comply with BS6920 at 98°C

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2210068
Size:
3/8" BSP male inlet x 3/8" BSP male outlet.
Marking:
Reginox on body.
Installation Requirements:
R001
Expiry date:
31/10/2027
Model:
TRIBEZI / AMANZI TANK

Approval Holder:
Reginox UK Ltd.
Company Name
Reginox UK Ltd.
Address
Units 1-4 Radnor Park Trading Estate, Back Lane, Congleton
Postcode
CW12 4XJ
Country
Cheshire

View All Listings by this Company

Print This Approval


#2306067

‘G5 BC’ range of command centres that provide instant near boiling and chilled water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The products can also be supplied with a hot water booster and/or a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 98˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2306067
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection
Marking:
Zip and Hydrotap on body. ZIP, model and maximum pressure and technical information on adhesive label on inside of body.
Installation Requirements:
R001 R007 R008 R009 R040 R150 R170
Expiry date:
30/06/2028
Proviso:
The non ‘NS’ suffix models listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50084000UKNS: G5 BC Home M, H50002000UKNS: G5 BC20 M (with or without booster), H50004000UKNS: G5 BC60 M (with or without booster), H50084000UK: G5 BC Home M, H50002000UK: G5 BC20 M (with or without booster), H50004000UK: G5 BC60 M (with or without booster). Command Centre UK HydroTap Venturi models: H50092000UKNS: G5 BC Home H, H50021000UKNS: G5 BC20 H (with or without booster), H50023000UKNS G5 BC60 H (with or without booster), H50092000UK: G5 BC Home H, H50021000UK: G5 BC20 H (with or without booster), H50023000UK G5 BC60 H (with or without booster).
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


#2306068

‘G5 BCS’ range of command centres that provide instant near boiling, sparkling and chilled water (all filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products incorporate a pressure reducing valve (adjustable outlet pressure between 2.25 and 2.75 bar) on the supply to the carbonator unit. The carbonator inlet incorporates a non-return valve. The products are supplied with a filter cartridge. The products can also be supplied with a hot water booster and/or a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum inlet supply pressure 5.0 bar. Maximum operating temperature 98˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2306068
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and Hydrotap on body. Serial number containing date of manufacture (YYYY/MM/DD) and manufacturing code on adhesive label inside cover.
Installation Requirements:
R001 R007 R008 R009 R040 R160 R170
Expiry date:
30/06/2028
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50083000UK - G5 BCS Home M, H50060000UK - G5 BCS20 M (with or without booster), H50062000UK - G5 BCS60 M (with or without booster). Command Centre UK HydroTap Venturi models: H50090000UK - G5 BCS Home H, H50074000UK - G5 BCS20 H (with or without booster), H50075000UK - G5 BCS60 H (with or without booster).
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


#2306069

‘G5 BCU60 UV’ Command centre that provides instant near boiling and chilled water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combinations of solenoid valves and electronic pumps to the outlets. A UV unit is incorporated on the outlet from the chilled water tank. The products are supplied with a filter cartridge. The products can also be supplied with a hot water booster and/or a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 98˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2306069
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and Hydrotap on front face of unit.
Installation Requirements:
R001 R007 R008 R008 R040 R0150 R170
Expiry date:
30/06/2028
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
H500U2000UK: G5 BCU60 UV Command Centre UK HydroTap
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.