Combination Tap Assemblies
Section Code 0445 : Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
Back To Directory Sections
WRAS Approval Number: #2007806
Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members.
The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2007806
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
- Marking:
- PPI on rear of body
- Installation Requirements:
- R001 R090
- Expiry date:
- 31/07/2025
- Model:
-
907015
- Approval Holder:
- PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road
Xinyang Industrial Zone
Haicang District
Xiamen 361022
Country
China
View All Listings by this Company - Manufacturer:
- PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road
Xinyang Industrial Zone
Haicang District
Xiamen 361022
Country
China
View All Listings by this Company
WRAS Approval Number: #2007808
Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members.
The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2007808
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
- Marking:
- TP ON BASE
- Installation Requirements:
- R001 R090
- Expiry date:
- 31/07/2025
- Model:
-
546885
- Approval Holder:
- Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office
Lakeside House
Bedford
Postcode
NN4 7HD
Country
Northhampton
Phone
+44 (0) 1604 503457
View All Listings by this Company
WRAS Approval Number: #2007314
Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2007314
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
- Marking:
- DTC25 on rear of body.
DEVA on front of the body.
- Installation Requirements:
- R001 R090
- Expiry date:
- 31/07/2025
- Model:
-
BDG104 – Bridgewater Flexi sink mixer.
Product Images
- Approval Holder:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #2005321
Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a pull out spray with push button trigger assembly and dome type operating member.
The pull out spray also incorporates a single check valve assembly (however the complete unit has not been tested to demonstrate it provides adequate backflow protection).
The outlets incorporate a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2005321
- Size:
- Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections
- Marking:
- Grohe logo, design and engineering, Grohe Germany, date of manufacture (YYMM) Grohe ID made in label on body.
- Installation Requirements:
- R001 R009 R090
- Expiry date:
- 31/05/2025
- Model:
-
Grohe ‘Minta Smart Control’ sink mixers with L-spout and pull-out spray:
31.613.
31.613.A00 (hard graphite).
31.613.AS0 (satin black).
31.613.DA0 (Warm Sunset).
31.613.DC0 (supersteel).
Grohe ‘Messence Smart Control’ sink mixers with L-spout and pull-out spray:
31.615.
31.615.A00 (hard graphite).
31.615.AL0 (brushed hard graphite).
31.615.AS0 (satin black).
31.615.BE0 (polished nickel).
31.615.DA0 (Warm Sunset).
31.615.DC0 (supersteel).
31.615.DL0 (brushed warm sunset).
Grohe ‘Zedra Smart Control’ sink mixers with L-spout and pull-out spray:
31.593.002.
31.593.DC2 (supersteel).
- Approval Holder:
- Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg,
58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com
View All Listings by this Company - Manufacturer:
- Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg,
58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com
View All Listings by this Company
WRAS Approval Number: #2007385
Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2007385
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
- Marking:
- DTC25 (brand of Methven) & Methven on body.
- Installation Requirements:
- R001 R090
- Expiry date:
- 31/07/2025
- Model:
-
HASMCP COMBINATION TAP ASSEMBLIES
- Approval Holder:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #2011303
Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks and single lever operating members, with a pull out spray retained within a holster.
The spout outlet incorporates a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2011303
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
- Marking:
- Deva on front of body.
DTC25 (brand of Methven) on rear of body
- Installation Requirements:
- R001 R006 R010
- Expiry date:
- 30/11/2025
- Model:
-
ABN104 Abingdon.
Model added September 2023
BRG104
- Approval Holder:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #2011304
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). incorporating a ceramic cartridge and single lever operating member with a spring loaded, pull down trigger operated spray.
The spout outlet incorporates a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2011304
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
- Marking:
- Deva on front of body.
DTC25 (brand of Methven) on rear of body.
- Installation Requirements:
- R001 R090
- Expiry date:
- 30/11/2025
- Model:
-
SPR104 – Spring.
Model added September 2021:
SLINKY218
- Approval Holder:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #2101351
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member.
The product incorporates a pull-out spout with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2101351
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
- Marking:
- Gessi on operating member.
- Installation Requirements:
- R001 R009 R090
- Expiry date:
- 31/01/2026
- Model:
-
60077
Product Images
- Approval Holder:
- Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio
13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it
View All Listings by this Company - Manufacturer:
- Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio
13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it
View All Listings by this Company
WRAS Approval Number: #2101361
Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member.
The product incorporates a pull-out spout outlet with a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2101361
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
- Marking:
- Franke on operating member.
- Installation Requirements:
- R001 R007 R009 R090
- Expiry date:
- 31/01/2026
- Model:
-
Orbit:
115.0623.055 (Chrome).
115.0623.057 (Onyx).
115.0623.059 (Coffee).
115.0623.134 (Graphite).
115.0623.136 (Oatmeal).
115.0623.139 (Polar white).
115.0623.141 (Stone grey).
115.0623.147 (Oyster).
- Approval Holder:
- Franke Kitchen System Ltd
Company Name
Franke Kitchen System Ltd
Address
Franke Strasse
2 CH-4663 Aarburg
Country
Switzerland
View All Listings by this Company - Manufacturer:
- Xiamen Solex High-Tech Industries Co., Ltd
Company Name
Xiamen Solex High-Tech Industries Co., Ltd
Address
No. 298 Yangguang Road West
Xinyang Industrial Zone
Haicang District
Xiamen,
Fujian
Country
China
View All Listings by this Company
WRAS Approval Number: #2012064
Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members.
The spout outlet incorporates a pull-out spray with plastic aerator.
The cold Inlet incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2012064
- Size:
- ½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
- Marking:
- Lota on side of body.
- Installation Requirements:
- R001 R006 R009 R010 R090
- Expiry date:
- 31/12/2025
- Model:
-
63261-0001 Chrome
63261-0004 Brushed Nickel
63261-006801 Kitchen Mixer Matt Black
63261-004408 Brushed Brass
63268-0001 Chrome
63268-0004 Brushed Nickel
63268-016801 Matt Black
63268-004408 Brushed Brass
Product Images
- Approval Holder:
- Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road
Jimei District
Xiamen, 361022
Country
China
View All Listings by this Company - Manufacturer:
- Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road
Jimei District
Xiamen, 361022
Country
China
View All Listings by this Company
Page 1 of 8
