TEST SITE

Cistern - Flushing

Section Code 2035 : Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

Back To Directory Sections

#2004906

BS EN 14055 (2010) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap with a dual flush Drop Valve (Acclaim V) or Syphon (Acclaim S) of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2004906
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Top of outlet drop valve marked ‘Dudley’ and ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Expiry date:
30/04/2025
Model:
ACCLAIM V WC CISTERN & ACCLAIM S WC CISTERN

Approval Holder:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2009910

BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve (Phantom T & Phantom V) or dual flush syphon (Phantom S) for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2009910
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked ‘Cascade +’ Top of Pneumatic drop valve is marked ‘TD’ Top of Cable Operated Drop Valve marked ‘Dudley Water Saving Solutions’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Expiry date:
30/09/2025
Model:
Phantom S, Phantom V & Phantom T WC Cistern
Product Images

Approval Holder:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2010908

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern is operated by a manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2010908
Size:
½” BSP Inlet connection.
Marking:
Top of cistern lid marked ‘DUDLEY OSMO T1’. Top of outlet drop valve marked ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R556
Expiry date:
31/10/2025
Model:
OSMO T1 Concealed Cistern (Category 3).

Approval Holder:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2007377

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2007377
Size:
½” BSP (M)
Marking:
Valsir on flush plate. Valsir on body of stop vlave. Valsir on shield. Valsir on ourlet device. Valsir on body. Date of manufacture on body MM/YY. Date clock format 01/20 and 6l water line moulded on body inside cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/07/2025
Model:
VS0853275UK. VS0853247UK. VS0853276UK. VS0853008UK. VS0853279UK. VS0853212UK. VS0853004UK. VS0853327UK. VS0853328UK. VS0853202UK. VS0853201UK. VS0853305UK. VS0853306UK. VS0853002UK. Models added April 2023: VS0853245UK VS0881305UK VS0853269UK Model added July 2023: VS0853052UK

Approval Holder:
Valsir Spa
Company Name
Valsir Spa
Address
Localita Merlaro 2, 2507 Vestone (Brescia)
Country
Italy
Phone
+39 365 877011

View All Listings by this Company
Manufacturer:
Valsir Spa
Company Name
Valsir Spa
Address
Localita Merlaro 2, 2507 Vestone (Brescia)
Country
Italy
Phone
+39 365 877011

View All Listings by this Company

Print This Approval


#2012045

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012045
Size:
½” BSP (M)
Marking:
WDI, Manufactures Mark ''ECO'' and model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
K301-A01-E01002 WC concealed dual flushing cistern Frame included K301-A01-E01003 WC concealed dual flushing cistern Frame included K301-B01-E01002 WC concealed dual flushing cistern Insert frame included K301-B01-E01003 WC concealed dual flushing cistern Insert frame included K301-D01-E01002 WC concealed dual flushing cistern No frame K301-D01-E01003 WC concealed dual flushing cistern No frame

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2012047

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012047
Size:
½” BSP (M)
Marking:
WDI, manufacturers mark (ECO) and model number on cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
K133-A01-E01002 WC concealed dual flushing cistern Frame included K133-A01-E01003 WC concealed dual flushing cistern Frame included K133-A02-E01002 WC concealed dual flushing cistern Frame included K133-A02-E01003 WC concealed dual flushing cistern Frame included K133-D01-E01002 WC concealed dual flushing cistern No frame K133-D01-E01003 WC concealed dual flushing cistern No frame

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2012048

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012048
Size:
½” BSP (M)
Marking:
WDI, manufacture mark (ECO) and model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
K210-A01-E01002 WC concealed dual flushing cistern Frame included K210-A04-E01002 WC concealed dual flushing cistern Frame included K210-D01-E01002 WC concealed dual flushing cistern No frame K210-D03-E01002 WC concealed dual flushing cistern No frame

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2012927

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012927
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate. Dudley on front or side of cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/12/2025
Model:
Mirage WC Cistern
Product Images

Approval Holder:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2012903

BS EN 14055 (2018) concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve discharging via a type AG airgap and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. The cistern is operated by manual push button/push plate. The side entry inlet valve is mounted internally and is supplied via a stainless steel braided EPDM lined flexible hose assembly which incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012903
Size:
½” BSP Male or 15mm push-fit.
Marking:
Dudley, TD Logo & Thomas Dudley Ltd. on inspection cover. ‘TD’, on top of outlet drop valve. ‘HYDROFLO’ on discharge cap of inlet valve. ‘DUDLEY BS 1212/4’ on nut of inlet valve.
Installation Requirements:
R001 R280 R556
Expiry date:
31/12/2025
Model:
OBC Concealed Cistern (Category 3).
Product Images

Approval Holder:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2012905

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012905
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate. Dudley on inside of cistern lid.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
Slimline WC Cistern.
Product Images

Approval Holder:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2012320

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. For use with cold water only. Maximum working pressure 10.0 bar.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012320
Size:
½” BSP (M)
Marking:
Grohe logo on cistern & flush plate. 6L volume and water line on cistern. Date of manufacture (YYMM) & Grohe plant indentification on cistern and flush plate.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
38.422.10A
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2012321

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012321
Size:
½” BSP (M)
Marking:
Grohe logo on cistern. 6L volume and water line on cistern. Date of manufacture (YYMM) & Grohe plant indentification on cistern and flush plate.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
38.661.10A
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2007355

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2007355
Size:
½” BSP (M)
Marking:
Valsir on flush plate. Valsir on body of stop vlave. Valsir on shield Valsir on outlet device Valsir on body Date of manufacture on body MM/YY Date clock format 01/20 6l water line moulded on body inside cistern
Installation Requirements:
R001 R280 R556
Expiry date:
31/07/2025
Model:
VS0858002UK TROPEA S MURARE C/FOD+RETE MECCANICA VS0858312UK TROPEA S MUR C/FOD+RETE MEC ARIAPUR 80 VS0858322UK TROPEA S MUR. C/FOD+RETE MEC ARIAPUR LED VS0858211UK TROPEA S BLOCK S90 MECC D90 VS0858321UK TROPEA S BLOCK MEC S90 D90/90 ARIAPUR 80 VS0858332UK TROPEA S BLOCK MEC S90 90/90 ARIAPUR LED
Product Images

Approval Holder:
Valsir Spa
Company Name
Valsir Spa
Address
Localita Merlaro 2, 2507 Vestone (Brescia)
Country
Italy
Phone
+39 365 877011

View All Listings by this Company
Manufacturer:
Valsir Spa
Company Name
Valsir Spa
Address
Localita Merlaro 2, 2507 Vestone (Brescia)
Country
Italy
Phone
+39 365 877011

View All Listings by this Company

Print This Approval


#2103327

WC flushing cistern incorporating a bottom entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a pnuematic push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103327
Size:
½” BSP (M)
Marking:
Geberit on cistern casing. 6l water line inside cistern. Geberit on flush actuators.
Installation Requirements:
R001 R280 R560 R556
Expiry date:
31/03/2026
Model:
109.724.21.2 109.721.00.2 111.207.00.2 111.206.21.2
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2103302

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103302
Size:
½” BSP (M) inlet connection
Marking:
Viega on flush operating panel. 6/3 volume on backplate within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/03/2026
Model:
8502.38 WC cistern (without frame) 8522.38 with dry wall frame height 1120mm 8524.38 with dry wall frame height 1120mm 8530.38 with dry wall frame height 980mm
Product Images

Approval Holder:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval


#2103303

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103303
Size:
½” BSP (M) inlet connection.
Marking:
Viega on flush operating panel. 6/3 volume on backplate within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/03/2026
Model:
8504.38 WC cistern (without frame) 8533.38 with dry wall frame height 820mm
Product Images

Approval Holder:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval


#2106002

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The cistern incorporates an angled servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106002
Size:
½" BSP (M)
Marking:
Fluidmaster label on front of cistern. Schwab on label inside cistern and on flush plate surround.
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
5-481-515 Concealed Cistern UP 189 - 747 (cistern only). 5-399-135 DUPLO WC 189 PREMIUM 747 FV (cistern with frame).

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Country
USA
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Country
USA
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company

Print This Approval


#2012089

AQUAECO RANGE OF WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012089
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
AQP-K301-AO1-ESG2 WC CONCEALED DUAL FLUSHING CISTERN FRAME INCLUDED, AQP-K301-B01-ESG2 WC CONCEALED DUAL FLUSHING CISTERN INSERT FRAME INCLUDED & AQP-K301-DO1-ESG2WC CONCEALED DUAL FLUSHING CISTERN NO FRAME CISTERN FLUSHING

Approval Holder:
Aquazone (UK) Ltd.
Company Name
Aquazone (UK) Ltd.
Address
Unit 1 Oakwell Park Trading Estate, Birstall, Leeds
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2012090

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012090
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
AQP-K133-A01-ESG2 WC concealed dual flushing cistern Frame included

Approval Holder:
Aquazone (UK) Ltd.
Company Name
Aquazone (UK) Ltd.
Address
Unit 1 Oakwell Park Trading Estate, Birstall, Leeds
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2012091

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012091
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
AQP-K210-A01-ESG2 WC concealed dual flushing cistern Frame included AQP-K210-D03-ESG2 WC concealed dual flushing cistern No frame

Approval Holder:
Aquazone (UK) Ltd.
Company Name
Aquazone (UK) Ltd.
Address
Unit 1 Oakwell Park Trading Estate, Birstall, Leeds
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2107002

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. There is a flow restrictor and stainless-steel strainer on the inlet valve. The cistern is operated by a manual push button. Maximum operating pressure 8.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2107002
Size:
½” BSP (M) inlet
Marking:
Harrisson Bathrooms Logo on body. 6L mark in cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/07/2026
Model:
CISTERN002
Product Images

Approval Holder:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company
Manufacturer:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2012102

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012102
Size:
½” BSP (M)
Marking:
"X" CROSSWATER LOGO & MODEL ON CISTERN BODY
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
WCF118X50-VS+2 WC CONCEALED DUAL FLUSHING CISTERN FRAME INCLUDED WCC57X46+2 WC CONCEALED DUAL FLUSHING CISTERN NO FRAME CISTERN FLUSHING

Approval Holder:
Crosswater Ltd
Company Name
Crosswater Ltd
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU.
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2012103

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012103
Size:
½” BSP (M)
Marking:
"X" CROSSWATER LOGO & model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
WCF82X50+2 WC concealed dual flushing cistern Frame included WCF98X50+2 WC concealed dual flushing cistern Frame included WCC47X46+2 WC concealed dual flushing cistern No frame

Approval Holder:
Crosswater Ltd
Company Name
Crosswater Ltd
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU.
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2012101

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012101
Size:
½” BSP (M)
Marking:
"X" Crosswater logo and model number on cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
WCF118X50+2 WC concealed dual flushing cistern Frame included

Approval Holder:
Crosswater Ltd
Company Name
Crosswater Ltd
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU.
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2109022

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109022
Size:
15mm Compression Model added April 2022: ½” BSP (M)
Marking:
Fluidmaster, model and flushing volumes inside of cistern. Olympia on operating buttons. Model added April 2022: Fluidmaster, model and flushing volumes inside of cistern.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
T02-0100WRAS1, T02-0100WRAS2 & T02-0100WRAS3. Model added April 2022: T02-0800WRAS3
Product Images

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Country
USA
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster Turkey
Company Name
Fluidmaster Turkey
Address
Key Teknik Yapi Malzemeleri San Ve Tic AS
General Email

View All Listings by this Company

Print This Approval


#2110097

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2110097
Size:
½” BSP (M)
Marking:
Fluidmaster on cistern. Schwab brandname on operating button.
Installation Requirements:
R001 R556
Expiry date:
31/10/2026
Model:
5-474-025 UP FRONT-TOP 187 - 747 (cistern only). 5-398-070 DUPLO WC 187 83 cm 747 FV (cistern with frame).
Product Images

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Country
USA
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Country
USA
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company

Print This Approval


#2106003

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106003
Size:
1/2” BSP (M).
Marking:
Fluidmaster and model number inside cistern.
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
T06-0800WRAS2 3-4.5 Ltr. T06-0800WRAS1 3-4.5 Ltr. T06-0100WRAS1 3-6Ltr. T06-0100WRAS2 3-6Ltr.

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Country
USA
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster Turkey
Company Name
Fluidmaster Turkey
Address
Key Teknik Yapi Malzemeleri San Ve Tic AS
General Email

View All Listings by this Company

Print This Approval


#2111035

Range of concealed WC flushing cisterns with a side entry BS 1212-4(2016) float operated inlet valve providing a type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two button assembly for a 6 or 3 litre flush volume. The cistern incorporates a servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. Maximum working pressure 10.0 Bar, Cold Water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111035
Size:
1/2" BSP (M)
Marking:
Rongji (brand of manufacturer), model number inside cistern.
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
ET336-F ET336
Product Images

Approval Holder:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company
Manufacturer:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company

Print This Approval


#2111323

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111323
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: OLI, OLI PLUS MEC, product date DD/MM/YY 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
OLI120 PLUS MEC OLI120 PLUS PNEU
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company

Print This Approval


#2111356

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111356
Size:
½ “BSP (F) captive nut
Marking:
Vitra etched on flush plate, 6L waterline mark within cistern Vitra on Styropor cover External body states: Vitra, date of manufacture (DD/MM/YY), EN14055, 6L water level
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
742-5805-01. 742-4805-01. 742-1735-01 (model no longer available for purchase from February 2023).
Product Images

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2112322

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112322
Size:
½” BSP (M)
Marking:
Adhesive label below insert within cistern: OLI, actuation method, product date (DD/MM/YYYY) & OLI on flush plate 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
Expert Plus Mec 1130 Expert Plus Mec 820 Expert Plus Pneu 1130 Expert Plus Pneu 820 Expert Plus Cable 1130 Expert Plus Cable 820
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company

Print This Approval


#2112331

Range of concealed WC flushing cisterns incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112331
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: OLI, actuation method, product date DD/MM/YY OLI etched on flush plate 6L waterline mould to casing withtin cistern
Installation Requirements:
R001 R556
Expiry date:
31/12/2026
Model:
OLI74 Plus Mec OLI74 Plus Pneu
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company

Print This Approval


#2112346

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112346
Size:
½” BSP (M)
Marking:
Geberit label on cistern. Month/Year date clock on rear cistern Geberit on flush plate. 6L waterline mould within cistern
Installation Requirements:
R001 R571
Expiry date:
31/12/2026
Model:
Geberit Omega concealed cistern 109.041.00.1 109.051.00.1 109.061.00.1 Geberit Omega Duofix frame for wall hung WC, 111.004.00.1 111.031.00.1 111.061.00.1 Model added July August 2023: 111.004.00.3
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2112907

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a lever operated dual flush syphon with full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112907
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Expiry date:
31/12/2026
Model:
Elite WC Cistern.
Product Images

Approval Holder:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2112329

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres and incorporates a servicing valve and flexible hose on the inlet supply.The cistern is operated by a pnuematic push button Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112329
Size:
½” BSP (M)
Marking:
Geberit on cistern and inlet valve.
Installation Requirements:
R001 R556
Expiry date:
31/12/2026
Model:
109.103.21.2 109.104.21.2 109.105.00.1 458.118.21.2 458.119.21.2 458.132.00.1 Model added May 2023: 458.145.00.1
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2112010

Concealed WC dual flushing cistern with a BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush valve is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure - 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112010
Size:
1/2" BSP (M)
Marking:
Geberit on push buttons, 6 litres inside cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/12/2026
Model:
Geberit Concealed Cistern Type 720
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2109063

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109063
Size:
15mm Compression
Marking:
Noken Porcelanosa, model and flushing volumes inside of cistern. Noken on operating buttons.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
100294206 & 100294199 WC CISTERN

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2
Country
Spain

View All Listings by this Company

Print This Approval


#2106050

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106050
Size:
1/2” BSP (M).
Marking:
NOKEN & SMARTLINE ON FRONT OF CISTERN NOKEN, MODEL & FLUSH VOLUME ON INSIDE OF CISTERN
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
100294223 3-4.5 Ltr. 100294207 3-4.5 Ltr. 100294230 3-6Ltr. 100294216 3-6Ltr.

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2
Country
Spain

View All Listings by this Company

Print This Approval


#2201033

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Incorporating a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2201033
Size:
½” BSP (M).
Marking:
Geberit on cistern and operating members. 6 litre mark in cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2027
Model:
Geberit Sigma 12cm concealed cistern 6/3 litres and Duofix wall frames: 109.309.00.5 Cistern only with push fit flush pipe, 111.352.00.5 Wall frame with cistern H112cm, less abled installation, 111.384.00.5 Wall frame with cistern H112cm, 111.383.00.5 Wall frame with cistern H112cm, wall anchors & connection bend, 111.911.00.5 Wall frame with cistern H98cm, wall anchors & connection bend. Models added July 2023: 111.383.00.3, 111.911.00.3.
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2203336

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 5.5 litres and a reduced flush of up to 2.7 litres and incorporates a servicing valve and flexible hose on the inlet supply. The cistern is operated by a manually operated push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203336
Size:
½” BSP (F)
Marking:
TECE on flush plate, model number, QR code on adhesive label on frame. 6L waterline, TECE, manufacture time & date inside of cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
9300377 TECEprofil toilet module "Design" with Uni cistern, installation height 1120mm 9300329 TECEprofil toilet module "Design" with Uni cistern, installation height 980mm 9300378 TECEprofil toilet module "Design" with Uni cistern, installation height 820mm 9041336 TECEbox toilet connection unit "Design" with Uni cistern, installation height 1060mm 9041335 TECEbox toilet connection unit "Design" with Uni cistern, installation height 820mm 9400302 TECEconstruct toilet module "Professional" with Uni cistern, installation height 1120mm. 9400303 TECEconstruct toilet module "Professional" with Uni cistern, installation height 980mm 9400304 TECEconstruct toilet module "Professional" with Uni cistern, installation height 820mm Model added February 2023 9041337 TECEbox toilet connection unit "Design" with Uni cistern, installation height 980mm
Product Images

Approval Holder:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company
Manufacturer:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company

Print This Approval


#2203328

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203328
Size:
½” BSP (M)
Marking:
Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
761-1746-01UK & 761-5826-01-UK

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2203329

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203329
Size:
½” BSP (M)
Marking:
Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
761-1745-01UK & 761-5825-01-UK
Product Images

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2203330

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203330
Size:
½” BSP (M)
Marking:
Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
761-1740-01UK & 761-5805-01-UK
Product Images

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2201058

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve and a stainless steel braided PEX lined flexible hose assembly. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2201058
Size:
½” BSP (M).
Marking:
WDI, ECO, model number and 6 litre line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2027
Model:
K212-D01-E01001, K212-D03-E01001211, K212-A04-E01002, K212-A01-E01001, K212-A04-E01001, K212-A01-E01002.
Product Images

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2106053

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106053
Size:
1/2” BSP (M).
Marking:
Vitra, flush volume and model number inside cistern. Vitra on front of cistern
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
WC CISTERNS 760-1720-01 3-6 LTR & 760-5805-01 3-6LTR

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2112363

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112363
Size:
½” BSP (M)
Marking:
Dolphin logo on adhesive label below insert within cistern: 6L waterline on casing within cistern Dolphin logo on flush plate
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
DB552x.M, DB552x.M, DB552x.M, DB552x.M.1130, DB552x.P.1130 & DB552x.C.1130 concealed WC flushing cisterns ‘x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2206363

Range of concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206363
Size:
½” BSP (M).
Marking:
Geberit on adhesive label on front of cistern Model No. & other information on adhesive label within cistern 6L waterline mould on cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
109.205.00.1 Geberit Kappa concealed cistern 15 cm, 6 / 3 litres, installation height 82 cm. 111.260.00.1 Geberit Duofix frame for wall-hung WC, 82 cm, with Kappa concealed cistern 15 cm. Model added July 2023: 111.260.00.3.
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2207046

Range of WC flushing cisterns incorporating a side entry BS 1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207046
Size:
½” BSP (F)
Marking:
Roper Rhodes and models number on label on front of cistern. 6 Litre inside.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
31/07/2027
Model:
TR9009 TR9005 TR9015
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2206364

WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206364
Size:
½” BSP (F).
Marking:
VITRA on adhesive label & 6L water line on cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
762-1735-01, 762-5805-01, 762-4805-01 & 762-5855-01 Model added April 2023: 732-5805-01.
Product Images

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2207048

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207048
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R280 R556 R571 R581 R001
Expiry date:
31/07/2027
Model:
TR9008.
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2207049

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207049
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
31/07/2027
Model:
TR9002
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2203378

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 5.5 litres and a reduced flush of up to 2.7 litres and incorporates a servicing valve and flexible hose on the inlet supply. The cistern is operated by a manually operated push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203378
Size:
½” BSP (F)
Marking:
TECE on flush plate, model number, QR code on adhesive label on frame. 6L waterline, TECE, manufacture time & date inside of cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
FF9300377 TECEprofil toilet module "Design" with Uni cistern, installation height 1120mm FF9300329 TECEprofil toilet module "Design" with Uni cistern, installation height 980mm FF9300378 TECEprofil toilet module "Design" with Uni cistern, installation height 820mm FF9041336 TECEbox toilet connection unit "Design" with Uni cistern, installation height 1060mm FF9041335 TECEbox toilet connection unit "Design" with Uni cistern, installation height 820mm FF9400302 TECEconstruct toilet module "Professional" with Uni cistern, installation height 1120mm. FF9400303 TECEconstruct toilet module "Professional" with Uni cistern, installation height 980mm FF9400304 TECEconstruct toilet module "Professional" with Uni cistern, installation height 820mm Model added March 2023: FF9041337 TECEbox toilet connection unit "Design" with Uni cistern, installation height 980mm

Approval Holder:
Bathroom Engineering Ltd (Tece UK)
Company Name
Bathroom Engineering Ltd (Tece UK)
Address
The Boathouse Wirral Park Road
Postcode
BA6 9XE
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2211005

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure – 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2211005
Size:
½” BSP (M)
Marking:
Harrison Bathrooms Logo on access panel, 6 Litre line inside cistern.
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
30/11/2027
Model:
CISTERN003
Product Images

Approval Holder:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company
Manufacturer:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2112367

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112367
Size:
½” BSP (M)
Marking:
Tissino on flush plate, Tissino on label inside cistern and 6l water line.
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
TRC-101 ROCCO 2 & TRC-107 ROCCO 2

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#2112368

Range of concealed WC flushing cisterns incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112368
Size:
½” BSP (M)
Marking:
Tissino on flush plate, Tissino on label inside cistern and 6l water line.
Installation Requirements:
R001 R556
Expiry date:
31/12/2026
Model:
TRC-104 ROCCO 2 SLIMLINE & TRC-106 ROCCO 2

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#2206330

Concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a angle valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206330
Size:
3/8” BSP Captive nut
Marking:
Alca on adhesive label on cistern, Alca printed on flush plate. 6L & waterline moulded within cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
AM101
Product Images

Approval Holder:
Alcadrain, s.r.o.
Company Name
Alcadrain, s.r.o.
Address
Komunardů 1626/35, Praha 7 - Holešovice 170 00 Czech Republic
Country
Czech Republic

View All Listings by this Company
Manufacturer:
Alcadrain, s.r.o.
Company Name
Alcadrain, s.r.o.
Address
Komunardů 1626/35, Praha 7 - Holešovice 170 00 Czech Republic
Country
Czech Republic

View All Listings by this Company

Print This Approval


#2212904

Range of high and low level BS EN 14055 (2018) WC cisterns incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush or mono flush syphon for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres.. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212904
Size:
½” BSP Male inlet connection
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R560 R556 R581
Expiry date:
31/12/2027
Model:
Trishell WC Cistern.
Product Images

Approval Holder:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2212064

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212064
Size:
½” BSP (M)
Marking:
T1803 - WRAS, Model name and Bestter on bottom of cistern, 6 Litre inside of cistern. T1900 & T1901 - WRAS, Model name and Bestter on support bracket inside of cistern, 6 Litre inside of cistern Models Added December 2023: T1811: Bestter logo and WRAS approved product on bottom of cistern T1900 (600) – T19001 (600) t1900 Bestter logo and WRAS approved product on front of support bracket
Installation Requirements:
R001 R280 R556 R560 R571 R581
Expiry date:
31/12/2027
Model:
T1900 (500mm) with frame T1901 (500mm) without frame T1803 Models Added December 2023: T1811 T1900(600mm) T1901(600mm)
Product Images

Approval Holder:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company
Manufacturer:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Print This Approval


#2212343

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212343
Size:
½” BSP (M).
Marking:
R&T on adhesive label on body. R&T, model number moulded on fixed plate. 6L waterline printed within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2027
Model:
G3004, G3005, G3008.
Product Images

Approval Holder:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen
Country
China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen
Country
China

View All Listings by this Company

Print This Approval


#2212315

Concealed WC dual flushing cistern with a side entry BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure – 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212315
Size:
½” BSP (M).
Marking:
R&T, model code printed on fixed plate. 6L waterline printed within cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
31/12/2027
Model:
G3003.

Approval Holder:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen
Country
China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen
Country
China

View All Listings by this Company

Print This Approval


#2301072

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301072
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
31/01/2028
Model:
TR9001 / VOR790/ INST13001

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2301334

Concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301334
Size:
½” BSP (M
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2028
Model:
OLI74 Plus Electronic

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company

Print This Approval


#2301335

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301335
Size:
½” BSP (M)
Marking:
OLI etched on flush panel; OLI, OLI120 Plus Elect, Date of manufacturer DD.MM.YY on adhesive label, 6L & waterline mould on plastic support for flush valve
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2028
Model:
OLI 120 Plus Electronic

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company

Print This Approval


#2303016

Range of inlet control valves with DZR brass bodies incorporating a pressure reducing valve (set at 1.5, 1.8. 2.0, 2.1, 3.0 or 3.5 depending on model) and a pressure relief valve (set at 3.0, 3.5, 4.5, 5.0. 6.0 or 8.0 depending on model. All models incorporate a stainless-steel mesh and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model CWIC355040 comes supplied with a tundish. For use with copper pipe to BS EN 1057, PB pipe (with inserts) to BS EN 7291-2:2010 and PEX pipe (with inserts) to BS EN 7291-3:2010. Maximum working pressure 16.0. Maximum operating temperature of 25°C.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303016
Size:
22mm compression fittings inlet and outlet.
Marking:
RWC, SYR, DR and Flow Arrow on Valve Body. Reliance Water Controls and Pressure on Pressure Reducing Ring. SYR and Flow Arrow on Pressure Relief Valve. Reliance Water Controls and Pressure on Pressure Relief Cap.
Installation Requirements:
R001 R120
Expiry date:
31/03/2028
Model:
CWIC355025, CWIC355026, CWIC355030, CWIC355035, CWIC355040, CWIC355045, CWIC355050, CWIC355055, CWIC355060, CWIC355065, CWIC355070, CWIC355090, CWIC355200.

Approval Holder:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2303359

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303359
Size:
½” BSP (M)
Marking:
R&T on moulded on fixed plate. Model number on adhesive label on front of lid. 6L waterline printed within cistern
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2028
Model:
G3005C

Approval Holder:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen
Country
China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen
Country
China

View All Listings by this Company

Print This Approval


#2212097

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212097
Size:
½” BSP (M)
Marking:
VADO, WRAS & Model name on bottom of cistern, 6 Litre inside of cistern.
Installation Requirements:
R001 R280 R556 R560 R571 R581
Expiry date:
31/12/2027
Model:
WG-095-F/C (500MM) WITH FRAME & WG-095-C (500MM) WITHOUT FRAME CISTERNS.

Approval Holder:
Vado
Company Name
Vado
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466

View All Listings by this Company

Print This Approval


#2305327

Concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by an electronically controlled flush valve. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2305327
Size:
1/2” BSP (M).
Marking:
Cistermiser on IR sensor, Adhesive label on cistern stating Cistermiser, address, model and other tech info.
Installation Requirements:
R001 R280 R556 R581 R560
Expiry date:
31/05/2028
Model:
EasyflushEVO Cistern.

Approval Holder:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate 59/69 Reading Road
Postcode
RG5 3AN
Country
Woodley
Phone
+44 118 969 1611 Fax: 0118 944 1426
General Email
Alicja.Wielechowska@cistermiser.co.uk

View All Listings by this Company
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate 59/69 Reading Road
Postcode
RG5 3AN
Country
Woodley
Phone
+44 118 969 1611 Fax: 0118 944 1426
General Email
Alicja.Wielechowska@cistermiser.co.uk

View All Listings by this Company

Print This Approval


#2306301

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by electronic or manual actuation. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306301
Size:
½” BSP (M)
Marking:
TOTO on adhesive label on body
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2028
Model:
Neorest range: WH183EAT MB175M#SS (actuation plate)

Approval Holder:
TOTO Europe GmbH
Company Name
TOTO Europe GmbH
Address
Zollhof 2 40211 Düsseldorf Germany
Phone
+49 211 273080

View All Listings by this Company

Print This Approval


#2306040

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306040
Size:
½” BSP (M)
Marking:
Bestter, Model number and Wras on Front of support bracket inside of cistern. 6 litre mark inside cistern
Installation Requirements:
R001 R556 R581
Expiry date:
30/06/2028
Model:
T1910 T1911

Approval Holder:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company
Manufacturer:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Print This Approval


#2306078

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306078
Size:
½” BSP (M)
Marking:
VADO, WRAS & Model number on Front cover. 6 litre mark inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
30/06/2028
Model:
WG-095S-F/C/VADO & WG-095S-C/VADO

Approval Holder:
Vado
Company Name
Vado
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466

View All Listings by this Company

Print This Approval


#2311060

WC flushing cistern incorporating a side entry BS 1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2311060
Size:
1/2” BSP (M)
Marking:
Roper Rhodes logo, Model and other information on adhesive label on body, 6 Litre line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
30/11/2028
Model:
TR9006 / INST13006

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company
Manufacturer:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2111390

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111390
Size:
½” BSP (M)
Marking:
Ideal Standard on Adhesive below insert within cistern: 6L waterline within cistern.
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
R031767 Prosys 120 WC cistern Mech CL2 6L & R031867 Prosys 120 WC cistern Pneu CL2 6L

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.