TEST SITE

Combination Tap Assemblies

Section Code 0450 : Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#2309925

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature with single lever type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2309925
Size:
Model IT1008CP 10mm copper tails Model IT1008FT Stainless steel braided EPDM flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Model, date of manufacture (MM/YY) on body. Inta on operating member.
Installation Requirements:
R001 R006
Expiry date:
30/09/2028
Model:
IT1008CP IT1008FT
Approval Holder:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval

#2010801

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010801
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections with EPDM washers.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
143138
Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2010802

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating non-rising spindle headworks with cross top operating members. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010802
Size:
Stainless steel braided EPDM lined hoses assemblies incorporating ½” captive nut.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
143708
Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2004008

Single hole, single outlet, fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004008
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
PPI on rear of tap body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
162938EX
Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2004012

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headworks and single lever operating members. The outlet incorporates a plastic flow straighter or aerator and the product is supplied with a coin type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004012
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Francis Pegler (brand of Comap UK Ltd) on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
Ebro 4G4122
Approval Holder:
Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT
Country
Leigh

View All Listings by this Company
Manufacturer:
COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Print This Approval

#2004014

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004014
Size:
Stainless steel braided EPDM lined hose assemblies with EPDM washes and ½” BSP captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
193838 Model 193838 MBK1 added december 2022
Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2004015

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and dome operating members. The spout outlets incorporate a plastic aerator. Model 33525664 is supplied with a metal C clamp & all other models are supplied with a metal backnut. Some models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004015
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Dornbracht on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
33501664, 33525664, 33526664, 33537664 & 33539664
Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
Country
Germany
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
Country
Germany
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#2004048

Deck mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork and single lever operating member. The spout incorporates a plastic aerator or straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004048
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Francis Pegler on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
4S1205
Approval Holder:
Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT
Country
Leigh

View All Listings by this Company
Manufacturer:
COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Print This Approval

#2004306

Range of pillar taps with brass bodies (chrome plated or gold effect finish /501 model), incorporating rising spindle headworks with cross top operating members. The products are supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004306
Size:
½” BSP (M)
Marking:
DTC (brand of Methven) on rear of body
Installation Requirements:
R001 R006
Expiry date:
30/04/2025
Model:
CR19 & CR19/501
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2004334

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chromium plated or supersteel finish DC3 model) incorporating a ceramic cartridge headwork with a single lever type operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004334
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Grohe on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2025
Model:
Grohe ‘Plus’ OHM: 32.618.003. 32.618.DC3.
Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval

#2004357

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The KEBPUWCPUK model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004357
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Methven on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
KEBCPUK, ZH KEBCPUK & KEBPUWCPUK COMBINATION TAP ASSEMBLIES
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2004328

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004328
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Grohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2025
Model:
Grohe ‘Plus’ OHM basin mixer size S: 32.612.003. 32.612.30L.
Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval

#2004343

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004343
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Deva (brand of Methven) on operating member. DTC (brand of Methven) on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
INS113, EXG5072, STL113 & WYE113
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2006807

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Each hose inlet incorporates an EPDM seal with a stainless steel mesh filter. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006807
Size:
Stainless steel braided TPSiV lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Methven on operating member. DTC15 (brand of Methven) on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2025
Model:
AOBCPUK (chrome), AOBBKUK (matte black), AOBMCPUK (chrome), KEBMCPUK (chrome), BRBCPUK (chrome), BRBWBK (matte black) & BRBBKUK (matte black). Model added June 2020: CABCPUK
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2004912

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004912
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP captive nut end connections
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
J BASNW C
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2004914

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic aerator. Products are supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004914
Size:
Stainless steel EPDM lined hose assemblies with 15mm compression end connections.
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
SAI BAS C, HOU BAS C.
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2004312

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated or gold effect finish /501 model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004312
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP end connections.
Marking:
DTC 32A (brand of Methven) on body. Deva on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
ADORE113, ADORE113/501, NIL113, MCL113, LACE113 EXG5063, RVL113, ADORE313, ADORE313C, NIL313, LACE313 & MH ADORE313. Model added May 2023: T-ADORE313
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2005018

Range of single hole, single outlet (fixed) combination tap with brass bodies (various finishes, see model). Incorporating a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a plastic straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005018
Size:
Stainless Steel braided, PEX lined flexible hose assembly with a ½” BSP captive nut end connection
Marking:
Lota on front base of spout
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2025
Model:
63042-5101-Basin Mixer (Chrome) 63042-516801 (Matt Black) 63042-514408 (Brushed Brass)
Approval Holder:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval

#2005038

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005038
Size:
Stainless Steel braided, TPSIV lined flexible hose assembly with a ½” (F) BSP captive nut end connector.
Marking:
Arteform logo on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2025
Model:
FLOW 131 Basin monobloc mixer.
Approval Holder:
Arteform Ltd.
Company Name
Arteform Ltd.
Address
Unit 4 Hardwick Road Industrial Estate, Great Gransden, Sandy
Postcode
SG19 3BJ
Country
Bedfordshire

View All Listings by this Company
Manufacturer:
Arteform Ltd.
Company Name
Arteform Ltd.
Address
Unit 4 Hardwick Road Industrial Estate, Great Gransden, Sandy
Postcode
SG19 3BJ
Country
Bedfordshire

View All Listings by this Company

Print This Approval

#2005304

Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly with a brass body (various finished and styles), incorporating a quarter turn ceramic disc headwork with cross top operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005304
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
THG on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2025
Model:
Model - 3202/W Styles: A04 - Broadway à manettes, A1J - Amboise Malachite, A1K - Amboise Lapis Lazuli, A1L - Amboise Jaspe rouge, A1M - Amboise Onyx noir, A1T - Cheverny Lapis Lazuli, A1U - Cheverny Jaspe rouge, A1W - Sully Lapis Lazuli, A2A - Métropolis cristal clair, A2C - Océania, A2E - Venice, A2F - Naïade, A2G - Ange, A2H - Panthère cristal clair, A2J - Papillon, A2K - Panthère cristal noir, A2L - Métropolis cristal noir, A2N - Mossi cristal clair, A2T - Masque de Femme, métal grave, A2U - Masque de Femme, métal lisse, A46 - Pomme cristal lustré or, A52 - Broadway, A54 - Art Déco, A56 - Art Déco Cristal, A57 - Tradition, A59 - Tradition Cristal, A6P - Profil Onyx noir à manettes, A7A - Ithaque décor Or, A7B - Ithaque décor Platine, A7D - Capucine mauve décor Or, A7E - Capucine vert décor Platine, A7F - Marquise noir décor Or, A7G - Marquise blanc décor Platine, A8B - Vogue Améthyste, A8S - Vogue Lapis Lazuli, A9B - Jaipur cristal satiné, A9C - Jaipur Onyx noir, D1B - Gatsby, E53 - Najem, G08 - Pompadour, G13 - Rochambeau, G14 - Versailles, G29 - Charleston, G2H - Le 9, G2J - Faubourg porcelaine blanche à manettes, G2K - Faubourg porcelaine blanche, G2L - Faubourg porcelaine noire, G2M - Faubourg porcelaine noire à manettes, G2N - Froufrou, G2P - Froufrou à manettes, G2R - Frivole, G2S - Frivole à manettes, G2T - Faubourg metal, G2U - Faubourg métal à manettes, G31 - Cygne, G3N - Charleston à manettes métal lisse, G3R - Montaigne marbre Grand Antique, G3S - Montaigne marbre Grand Antique à manettes, G3T - Montaigne marbre Leonardo Grey, G3U - Montaigne marbre Leonardo Grey à manettes, G3V - Montaigne marbre blanc Vénus, G3W - Montaigne marbre blanc Vénus à manettes, G47 - Vendôme, G58 - Spirit à manettes, G69 - Spirit, G75 - Charleston à manettes, G79 - Cubica, G7A - Beaubourg, G7B - Beaubourg à manettes, G7C - Saint-Germain, G7D - Saint-Germain à manettes, G7F - Bondi, G7G - Bondi à manettes, G85 - Honfleur, G8B - Les Ondes à manettes, G9H - SYSTEM marbre Howlite à manettes, J17 - Beverley, U1A - Mandarine metal, U1D - Mandarine cristal clair, U1E - Mandarine cristal clair satiné, U1K - Mandarine Cristallia Diamant, U1S - Sully Onyx blanc, U1V - Cheverny Onyx noir, U2L - Nihal porcelaine bleue, U2M - Nihal métal lisse, U2N - Nihal porcelaine ivoire, U2P - Nihal porcelaine noire, U2R - Nihal porcelaine verte, U3A - Bagatelle metal, U3B - Bagatelle métal à manettes, U3E - Bagatelle pierre noire, U3F - Bagatelle pierre noire à manettes, U4A - Diplomate bagues lisses, U4B - Diplomate bagues annelées, U4C - Diplomate bagues torsadées, U4D - Diplomate Royale, U4E - Duomo, U4F - Duomo cristal, U5A - Flore, U5B - Island, U5C - Paradise, U5D - Sun Dragon, U5G - Moon Dragon, U5H - Jade Dragon, U6A - Pétale de Cristal clair, U6B - Pétale de Cristal bleu, U6C - Pétale de Cristal rouge, U6D - Pétale de Cristal noir, U6E - Pétale de Cristal clair liseré doré, U7B - Trocadéro Lapis Lazuli, U7D - Trocadéro Onyx noir, U7E - Trocadéro Oeil de Tigre, U8A - Wedding, U8B - Monte Carlo porcelaine or, U8C - Monte Carlo porcelaine or blanc, U93 - Malmaison metal, U94 - Malmaison cristal, U95 - Malmaison Portoro Finishes: A02 - Polished Chrome, C02 - Matt Chrome, C03 - Satin Chrome, G02 - Polished Chrome/Polished Gold, F18 - Rhodium Silver, F19 - Matt Rhodium Silver, H03 - Varnished Antique Silver, H08 - Varnished Matt Antique Silver, B01 - Polished Nickel, C01 - Matt Nickel, G01 - Polished Nickel/Polished Gold, E02 - Matt Nickel/Polished Gold, D01 - Varnished Clear Bronze, D05 - Varnished Matt Bronze, H24 - Varnished Antique Red Copper, H07 - Matt Antique Red Copper, H44 - Polished Luxbrass, H16 - Matt Luxbrass, H12 - Satin Luxbrass, F01 - Polished Gold, F02 - Matt Gold, F27 - Rose Gold, F23 - PVD aspect chrome, H50 - PVD aspect laiton mat, F33 - PVD brown bronze colour, F34 - PVD brown bronze colour – mât, F35 - PVD brown bronze colour – satiné, H52 - PVD couleur doré, H53 - PVD couleur doré mat, H54 - PVD couleur doré satiné, H49 - PVD couleur laiton, H51 - PVD couleur laiton satiné, H55 - PVD couleur nickel, H56 - PVD couleur nickel mat, H57- PVD couleur nickel satiné, F20 - PVD DORE A complete model number compiles of a three digit code from each section above, for example A04-A02-3202/W. This would give you Broadway à manettes –Chrome finish - ONE HOLE BIDET MIXER SWIVEL JET AND POP UP WASTE
Approval Holder:
THG
Company Name
THG
Address
35, rue Tournière - BP 80212 Béthencourt sur Mer 80535 Friville cedex
Country
France
Phone
+33 3.22.60.20.80

View All Listings by this Company
Manufacturer:
THG
Company Name
THG
Address
35, rue Tournière - BP 80212 Béthencourt sur Mer 80535 Friville cedex
Country
France
Phone
+33 3.22.60.20.80

View All Listings by this Company

Print This Approval

#2005307

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating members, and the spout outlet incorporates a plastic aerator. The product can be supplied with or without a pop-up waste arrangement. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005307
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Keuco on spout
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2025
Model:
59002 xxyy00 – Edition 90 - 155 59002 xxyy03 – Edition 90 - 250 59004 xxyy00 – Edition 90 - 115 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. yy denotes pop up waste: 00 - with pop up waste, 01 - without pop up waste
Approval Holder:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Country
Germany
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Country
Germany
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval

#2006809

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with a solenoid valve controlling the flow and activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006809
Size:
Stainless steel braided EPDM lined hose assembly with ½” captive nut end connections.
Marking:
Deva on front of body. DTC28 on rear of body.
Installation Requirements:
R001 R006 r010
Expiry date:
30/06/2025
Model:
SENSOR1/D, SENSOR2/D, SENSOR3/D
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2006810

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies, except for /501 suffix model which is gold plated), incorporating quarter turn ceramic disc headworks or a ceramic cartridge headwork (ELAN113 & DAR113 models only), all with single lever operating members, except GE04 models which have cross top operating members. The spout outlet incorporates a plastic flow straightener, except the DAR113 model which has a plastic aerator. The DLT113 models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006810
Size:
DAR113 model: Stainless steel braided PEX lined flexible hose aseemblies incorporating ½” captive nut end connections. All other models: 15mm copper tails
Marking:
ELAN113 model: DTC34 (brand of Methven) on body. Deva logo on operating member. DAR113 model: DTC53 (brand of Methven) on body. All other models: DTC34 (brand of Methven) on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2025
Model:
GE04, GE04/501, ELAN113, DLT113, DLT113BW, VW DLT113, DAR113.
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2004359

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004359
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP end connections.
Marking:
DTC 32A (brand of Methven) on body. Deva on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
DT1
Approval Holder:
COMMERCIALWARE LTD
Company Name
COMMERCIALWARE LTD
Postcode
PR8 6NA

View All Listings by this Company
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2005043

Range of single hole, single outlet (fixed) combination tap with brass bodies (various finishes, see model). Incorporating a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a plastic straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005043
Size:
Stainless Steel braided, PEX lined flexible hose assembly with a ½” BSP captive nut end connection
Marking:
BATHROOM BRANDS LOGO ON BASE OF TAP
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2025
Model:
HOX.001CP-BASIN MIXER (CHROME) HOX.001MB (MATT BLACK) HOX.001BB (BRUSHED BRASS) COMBINATION TAP ASSEMBLIES
Approval Holder:
Bathroom Brands Group Limited.
Company Name
Bathroom Brands Group Limited.
Postcode
DA1 5FU
Country
United Kingdom
Phone
07775 491 559

View All Listings by this Company

Print This Approval

#2006028

Deck mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006028
Size:
Stainless steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut
Marking:
Lota on rear of body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2025
Model:
62853-7001
Approval Holder:
Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road Jimei District Xiamen 361022
Country
China

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road Jimei District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2006072

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006072
Size:
PET braided TpSiv lined flexible hose assembly with a ½” BSP captive nut.
Marking:
Coalbrook logo (Brand of Davroc) on rear of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2025
Model:
XX1000YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval

#2006901

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator (COB BAS C) or flow straightener (COB SMBAS C). Model COB BAS C is supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006901
Size:
Stainless steel braided EPDM lined hose assemblies incorporating 15mm compression end connections.
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2025
Model:
COB BAS C. COB SMBAS C.
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2006902

Single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating. The spout outlet incorporates a flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006902
Size:
15mm copper tube
Marking:
Bristan on operating member
Installation Requirements:
R011 R006 R010
Expiry date:
30/06/2025
Model:
COB 1HBF C
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2006904

Single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Product is supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006904
Size:
Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections
Marking:
Bristan on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2025
Model:
BTZ BAS C
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2006910

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006910
Size:
15mm copper tube
Marking:
Bristan on mounting collar.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2025
Model:
QST BAS C
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2006330

Single hole, single outlet (fixed) combination tap assembles with brass bodies (various finishes), incorporating ceramic cartridge headworks with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006330
Size:
Stainless steel braided PEX lined hose assemblies incorporating ½” captive nut end connections.
Marking:
Crosswater logo (X) on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2025
Model:
PRO112DNx Where x denotes finish and can be replaced by: C = Chrome. V = Stainless steel effect. F = Brushed brass. M = Matt Black. A = Anthracite. W = White. B = Brushed Black Chrome. N = Polished Nickel. L = Brushed Nickel. Q = Unlacquered Brass. RG = Rose Gold. BGR = Brushed Rose Gold. P = Copper.
Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Phone
0845 873 8840

View All Listings by this Company

Print This Approval

#2006339

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The outlet incorporates a plastic aerator. Some models are supplied with a pop up or click type waste, see model.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006339
Size:
Stainless steel braided PEX lined hose assemblies incorporating 3/8” captive nut end connections.
Marking:
THG on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2025
Model:
6501B/W : single lever basin mixer and click waste 6500H/W : Single lever basin mixer high spout and click waste 6500/W : Single lever basin mixer high spout and click waste – 6500SV/W : Single lever basin mixer high spout without click waste 6500/W : Single lever basin mixer high spout and pop up waste 6500SV/W : Single lever basin mixer high spout without pop up waste Styles Click waste: G4P - Collection "O", G5A - Nano, G5B - Nano à manettes, G5D - Anoa corne noire G5E - Soho, G69-Spirit G6A - Métamorphose G6B - Métamorphose à manettes G6C - Métamorphose carbone G6D - Métamorphose céramique noire G6E - Métamorphose céramique blanche G7A - Beaubourg G7B - Beaubourg à manettes G7C - Saint-Germain G7D - Saint-Germain à manettes U2A - Le 11 by Alberto Pinto U2B - Le 11 by Alberto Pinto à manettes U2K - So POP-UP waste: A2I - Perle A2N - Mossi cristal clair A2R - Masque de Femme lunaire A2S - Masque de Femme solaire A2T - Masque de Femme, métal grave A2U - Masque de Femme, métal lisse A33 - Bambou cristal noir A34 - Bambou cristal Ambre A35 - Bambou cristal clair A6A - Profil métal A6B - Profil métal à manettes A6G - Profil Lalique cristal clair A6H - Profil Lalique cristal clair à manettes A6N - Profil Onyx noir A6P - Profil Onyx noir à manettes A7D - Capucine mauve décor Or G2J - Faubourg porcelaine blanche à manettes G2K - Faubourg porcelaine blanche G2L - Faubourg porcelaine noire G2M - Faubourg porcelaine noire à manettes G2N - Froufrou G2P - Froufrou à manettes G2R - Frivole G2S - Frivole à manettes G2T - Faubourg metal G2U - Faubourg métal à manettes G3N - Charleston à manettes métal lisse G55 - Do G58 - Spirit à manettes G5A - Nano, G5B-Nano à manettes G5D - Anoa corne noire G75 - Charleston à manettes G7E - Dean, A02 - Polished Chrome C02 - Matt Chrome C03 - Satin Chrome G02 - Polished Chrome/Polished Gold F18 - Rhodium Silver F19 - Matt Rhodium Silver H03 - Varnished Antique Silver H08 - Varnished Matt Antique Silver B01 - Polished Nickel C01 - Matt Nickel G01 - Polished Nickel/Polished Gold E02 - Matt Nickel/Polished Gold D01 - Varnished Clear Bronze D05 - Varnished Matt Bronze H24 - Varnished Antique Red Copper H07 - Matt Antique Red Copper H44 - Polished Luxbrass H16 - Matt Luxbrass H12- Satin Luxbrass F01 - Polished Gold F02 - Matt Gold F27 - Rose Gold F23 - PVD aspect chrome H50 - PVD aspect laiton mat F33 - PVD brown bronze colour F34 - PVD brown bronze colour – mât F35 - PVD brown bronze colour – satiné H52 - PVD couleur doré H53 - PVD couleur doré mat H54 - PVD couleur doré satiné H49 - PVD couleur laiton H51 - PVD couleur laiton satiné H55 - PVD couleur nickel H56 - PVD couleur nickel mat H57 - PVD couleur nickel satiné F20 - PVD DORE A complete model number compiles of a three digit code from each section above, for example G3N-A02.6500/W. This would give you Charleston à manettes metal lisse style and polished chrome finish single lever basin mixer and click waste
Approval Holder:
THG
Company Name
THG
Address
35, rue Tournière - BP 80212 Béthencourt sur Mer 80535 Friville cedex
Country
France
Phone
+33 3.22.60.20.80

View All Listings by this Company
Manufacturer:
THG
Company Name
THG
Address
35, rue Tournière - BP 80212 Béthencourt sur Mer 80535 Friville cedex
Country
France
Phone
+33 3.22.60.20.80

View All Listings by this Company

Print This Approval

#2006343

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chromium plated or unlaquered brass), incorporating ceramic cartridge headworks and single lever operating members. The outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006343
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Crosswater logo (X) on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2025
Model:
Basin monobloc: PRI110DNC PRI110DNUB Tall basin monobloc: PRI112DNC PRI112DNUB
Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Phone
0845 873 8840

View All Listings by this Company
Manufacturer:
A.G.Monteiro.
Company Name
A.G.Monteiro.
Address
Parque Industrial de Adaufe Lote H5A e H5B 4710-571 Braga
Country
Portugal

View All Listings by this Company

Print This Approval

#2005319

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork, and single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005319
Size:
Stainless steel braided, EPDM lined hose assembly with ½” captive nut (Models VSN113/EX, RUB113 & VSN113F) 15mm copper tails (Models ELAN313 & VSN113)
Marking:
Deva on operating member. DTC34 on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2025
Model:
ELAN313 VSN113 VSN113/EX VSN113F RUB113
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2006323

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with a click waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006323
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC32A (brand of Methven) on body. DEVA on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2025
Model:
ADORE113/EK
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#2007024

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2025
Model:
193938
Product Images
Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2007050

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating a ceramic cartridge headwork with either a single lever or dome type operating member. The spout outlet incorporates an aerator. The product can be supplied with a pop-up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007050
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
FANTINI on operating member or body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2025
Model:
Washbasin mixers Lamé: 24 XX M004F (standard body height - pop-up waste). 24 XX M004WF (standard body height - without waste). 24 XX M104F (standard body height - pop-up waste). 24 XX M104WF (standard body height - without waste). 24 XX M006WF (higher body version - without waste). 24 XX M106WF (higher body version - without waste). Washbasin mixers AL/23 Lissoni: 26 XX B004WF (standard version spout - without waste). 26 XX B003WF (longer version spout - without waste). 26 XX B006WF (higher body version - without waste). Washbasin mixers Nostromo: 50 XX E904F (standard version spout - pop-up waste). 50 XX E904WF (standard version spout - without waste). 50 XX E903F (longer version spout - pop-up waste). 50 XX E903WF (longer version spout - without waste). 50 XX E804F (standard version spout, lever handle - pop-up waste). 50 XX E804WF (standard version spout, lever handle - without waste). 50 XX E803F (longer version spout, lever handle - pop-up waste). 50 XX E803WF (longer version spout, lever handle - without waste). 50 XX E906WF (higher body version - without waste). 50 XX E806WF (higher body version, lever handle - without waste). Washbasin mixers Mint: 34 XX F004F (standard version spout - pop-up waste). 34 XX F004WF (standard version spout - without waste). 34 XX F003F (standard version spout - pop-up waste). 34 XX F003WF (longer version spout - without waste). 34 XX F006WF (higher body version - without waste). Where XX is replaced with the following to denote finish: 01 = Gold plus 02 = Chrome 13 = Matt Black 29 = Matt White 93 = Stainless steel 95 = Nickel PVD P5 = Matt Gun Metal PVD P6 = Matt British Gold PVD P9 = Matt Copper PVD
Product Images
Approval Holder:
Fratelli Fantini Spa
Company Name
Fratelli Fantini Spa
Address
Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company
Manufacturer:
Fratelli Fantini Spa
Company Name
Fratelli Fantini Spa
Address
Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

Print This Approval

#2007306

Deck mounted drinking fountain tap having a stainless steel body with an integeral shroud over the outlet. Outlet incorporates a stainless steel cover and strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007306
Size:
½” BSP (M)
Marking:
Bestware on body
Installation Requirements:
R001 R150
Expiry date:
31/07/2025
Model:
BUBMI
Product Images
Approval Holder:
Bestware Hardware Production Co. Ltd.
Company Name
Bestware Hardware Production Co. Ltd.

View All Listings by this Company

Print This Approval

#2007901

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Product is supplied with a click waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007901
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP captive nut end connection.
Marking:
Bristan on front of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2025
Model:
ALP BAS C
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2007903

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. Product is supplied with a click waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007903
Size:
15mm copper tails
Marking:
Alterna on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2025
Model:
TRDCBMXR
Approval Holder:
Saint-Gobain Building Distribution Ltd
Company Name
Saint-Gobain Building Distribution Ltd
Address

View All Listings by this Company
Manufacturer:
Saint-Gobain Building Distribution Ltd
Company Name
Saint-Gobain Building Distribution Ltd
Address

View All Listings by this Company

Print This Approval

#2007909

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a flow straightener. Product is supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007909
Size:
Stainless steel braided EPDM lined hose assemblies with ½” captive nut end connections.
Marking:
Bristan on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2025
Model:
511GF
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2007077

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007077
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
ebb & flo (brand of Toolstation) on tap body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2025
Model:
20761
Approval Holder:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN
Country
SOMERSET

View All Listings by this Company

Print This Approval

#2007312

Range of single hole, single outlet (fixed) brass bodied combination tap assemblies (various finishes, see model). Incorporating ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Models A42568VUK, A4256834VUK, A4256826VUK & A4256836VUK are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007312
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Vitra, date of manufacture (WW/YY) on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2025
Model:
ORIGIN A42555VUK Basin Mixer Short (Chrome) ORIGIN A4255534VUK Basin Mixer Short (Brushed Nickel) ORIGIN A4255526VUK Basin Mixer Short (Copper) ORIGIN A4255536VUK Basin Mixer Short (Matte Black) ORIGIN A42556VUK Basin Mixer (Chrome) ORIGIN A4255634VUK Basin Mixer (Brushed Nickel) ORIGIN A4255626VUK Basin Mixer (Copper) ORIGIN A4255636VUK Basin Mixer (Matte Black) ORIGIN A42557VUK Basin Mixer For Bowls (Chrome) ORIGIN A4255734VUK Basin Mixer For Bowls (Brushed Nickel) ORIGIN A4255726VUK Basin Mixer For Bowls (Copper) ORIGIN A4255736VUK Basin Mixer For Bowls (Matte Black) ORIGIN A42558VUK Basin Mixer For Bowls - Large (Chrome) ORIGIN A4255834VUK Basin Mixer For Bowls - Large (Brushed Nickel) ORIGIN A4255826VUK Basin Mixer For Bowls - Large (Copper) ORIGIN A4255836VUK Basin Mixer For Bowls - Large (Matte Black) ORIGIN A42568VUK Basin Mixer For Bowls with pop-up waste (Chrome) ORIGIN A4256834VUK Basin Mixer For Bowls with pop-up waste (Brushed Nickel) ORIGIN A4256826VUK Basin Mixer For Bowls with pop-up waste (Copper) ORIGIN A4256836VUK Basin Mixer For Bowls with pop-up waste (Matte Black)
Product Images
Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval

#2006080

Deck mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006080
Size:
Stainless steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut
Marking:
SWIRL on rear of body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2025
Model:
5416G COMBINATION TAP ASSEMBLIES
Approval Holder:
Kingfisher Plc.
Company Name
Kingfisher Plc.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX
Phone
+44 (0) 20 7372 8008

View All Listings by this Company

Print This Approval

#2009005

Range of single hole, single outlet, fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with either a lever or click type pop up waste (see models). Maximum working pressure 5.0 bar. Maximum operating temperature 60.0°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009005
Size:
Polyethylene terephthalate (PET) braided TpSiv lined flexible hose assembly with EPDM washer & ½” BSP captive nut end connection.
Marking:
AXCES by VADO on front of tap body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2025
Model:
Models with click type waste AX-AVA-100/CC-CP AX-NUR-100/CC-CP AX-IRO-100/CC-CP AX-VAL-100/CC-CP AX-MET-100/CC-CP AX-MET-100M/CC-CP AX-EKO-100/CC-CP AX-EKO-100M/CC-CP Model with lever waste AX-NUR-100-CP AX-KOR-100-CP AX-VAL-100-CP AX-MET-100-CP AX-EKO-100-CP AX-PRO-300-CP
Product Images
Approval Holder:
Vado
Company Name
Vado
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466

View All Listings by this Company
Manufacturer:
Vado
Company Name
Vado
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466

View All Listings by this Company

Print This Approval

#2009905

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members. Product is supplied with a pop-up waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009905
Size:
15mm copper tube
Marking:
Bristan logo etched on the shrouds
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2025
Model:
D2 BAS C CD
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2009307

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see model). Incorporating ceramic cartridge headworks, and single lever operating members. The inlets incorporate flow strainer and the spout outlet incorporates a plastic flow straightener. Can be supplied with our without a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009307
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Paini and Paini logo (an apple) on body and operating member.
Installation Requirements:
R001 R010 R006
Expiry date:
30/09/2025
Model:
53**2050H59, Unika lever , without waste 53**2050H670, Clinica lever , without waste 53**2050H68, Tex lever , without waste 53**2110H59, Unika lever , with waste 53**2110H670, Clinica lever , with waste 53**2110H68, Tex lever , with waste Where ** denotes finishes and can be replaced by: CR = chrome plated, PW = stainless steel brushed PVD, PY = black PVD
Product Images
Approval Holder:
Paini S.p.A. Rubinetterie
Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Country
Italy
Phone
+39 0322 9971

View All Listings by this Company
Manufacturer:
Paini S.p.A. Rubinetterie
Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Country
Italy
Phone
+39 0322 9971

View All Listings by this Company

Print This Approval

#2009321

Range of deck mounted, electronically operated combination tap assemblies (chromium plated brass) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlet incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009321
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (D with a dolphin) on Body
Installation Requirements:
R001 R006
Expiry date:
30/09/2025
Model:
DSaaa.bbb.ccc.d.ee Where ‘aaa’ denotes the style type, the following options are available: DS211 - 90° bent spout DS213 - 55° bent spout Where ‘bbb’ denotes the vertical height of the spout in mm. Range 125mm - 225mm in 25mm increments. Where ‘ccc’ denotes the horizontal length (projection) of the spout in mm. Range 125mm – 225mm in 25mm increments. Where ‘d’ denotes the material finish, the following options are available: 1 - brushed satin, 2 - mirror polished, 3 - PVD satin, 4 - PVD mirror polished or 5 - powder coated. Where ‘ee’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.
Product Images
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval

#2010012

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010012
Size:
Grey polymeric (PET) braided PE-X lined flexible hose assemblies with ½” captive nuts. Stainless steel braided PE-X lined flexible hose assemblies with ½” captive nuts.
Marking:
Gaoao on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2025
Model:
MA3580. MA3581. MA3582. MA3584. MA3590. MA3591. MA3592. MA3594. MA3058. Models added November 2021: MA3580YB MA3580YN(CS) MA3580YW MA3581YB MA3581YN(CS) MA3581YW MA3582YB MA3582YW MA3582YN(CS) MA3584YB MA3584YN(CS) MA3584YW
Product Images
Approval Holder:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company
Manufacturer:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 8

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.