TEST SITE

Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Section Code 2410 : Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed. It should also be noted that there is a likelihood of some materials being leached into the water, which together with materials already in the water at source, could exceed the maximum limits set in the EC Directive on Water Quality and therefore it is recommended that before putting such units into service where the water may be ingested, advice should first be sought from the Water Undertaker.

Back To Directory Sections

#2005025

Range of water conditioners incorporating Ball valves. TurboMAG models Simplex, Duplex Skid, Duplex Wall and Quadplex Skid incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
WRAS Approval Number:
2005025
Size:
See model
Marking:
Hydotec, model, size, pressure and operating info on label on body.
Installation Requirements:
R001 R120 R170 R290
Expiry date:
31/05/2025
Model:
TurboMAG Simplex - 1" BSP (M) TurboMAG Duplex Skid - 1.5" BSP (M) TurboMAG Duplex Wall - 1.5" BSP (M) TurboMAG Quadplex Skid - 2" BSP (M) TurboMAG Quadplex Vessel - DN50 Flanged.

Approval Holder:
Hydrotec International Water Treatment Limited
Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street Swords Country Dublin
Country
Ireland

View All Listings by this Company

Print This Approval


#2006054

Range of water conditioners with stainless steel or brass/copper alloy. Maximum working pressure 10.0 bar. Maximum operating temperature 100ºC.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Marking:
Suprion, model, serial number, flow arrow and other product info on label on body
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
30/06/2025
Model:
Model type A (Brass and copper alloy) JS-12E15: 15mm compression x 15mm compression. JS-75E22: 22mm compression x 22mm compression. EH-12F: ½” BSP (M) x ½” BSP (M). EH-75E22: 22mm compression x 22mm compression. Model type B (Fibre glass and copper alloy) JS-75: ¾” BSP (F) x ¾” BSP (F). JS-100: 1” BSP (F) x 1” BSP (F). JS-125: 1 ¼” BSP (F) x 1 ¼” BSP (F). JS-150: 1 ½” BSP (F) x 1 ½” BSP (F). EH-75: ¾” BSP (F) x ¾” BSP (F). EH-100: 1” BSP (F) x 1” BSP (F). EH-125: 1 ¼” BSP (F) x 1 ¼” BSP (F). EH-150 : 1 ½” BSP (F) x 1 ½” BSP (F). Model type C (Fibre glass and steel) JS-250: 2 ½” BSP (F) x 2 ½” BSP (F). JS-400: 4” BSP (F) x 4” BSP (F). EH-250: 2 ½” BSP (F) x 2 ½” BSP (F). EH-400: 4” BSP (F) x 4” BSP (F).

Approval Holder:
Ion Water Products Ltd
Company Name
Ion Water Products Ltd
Address
Terminus Road Chichester West Sussex
Postcode
PO19 8DW

View All Listings by this Company
Manufacturer:
Sunward Co Ltd
Company Name
Sunward Co Ltd

View All Listings by this Company

Print This Approval


#2011080

Range of magnetic scale inhibitors incorporating nickel plated copper bodies. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
22mm compression
Marking:
Lettergold System Guard, Size and other info on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
30/11/2025
Model:
Lettergold System Guard ® Magnetic Scale Inhibitor.
Product Images

Approval Holder:
Lettergold Plastics Ltd
Company Name
Lettergold Plastics Ltd
Address
Unit 4 Hammond Close Newmarket CB8 0AZ

View All Listings by this Company
Manufacturer:
Lettergold Plastics Ltd
Company Name
Lettergold Plastics Ltd
Address
Unit 4 Hammond Close Newmarket CB8 0AZ

View All Listings by this Company

Print This Approval


#2102702

Electrolytic scale inhibitor incorporating a nickel plated copper body. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
22mm compression
Marking:
Lettergold System Guard, Size and other info on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
28/02/2026
Model:
Lettergold System Guard ® Electrolytic Scale Inhibitor.

Approval Holder:
Lettergold Plastics Ltd
Company Name
Lettergold Plastics Ltd
Address
Unit 4 Hammond Close Newmarket CB8 0AZ

View All Listings by this Company
Manufacturer:
Lettergold Plastics Ltd
Company Name
Lettergold Plastics Ltd
Address
Unit 4 Hammond Close Newmarket CB8 0AZ

View All Listings by this Company

Print This Approval


#2102704

Electrolytic scale inhibitor incorporating a nickel plated copper body. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
22mm compression
Marking:
Altecnic, DirtMag iQ, Size and other info on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
28/02/2026
Model:
ALTECNIC DIRTMAG iQ ELECTROLYTIC SCALE INHIBITOR 114-9005.

Approval Holder:
Altecnic Ltd - Caleffi Group
Company Name
Altecnic Ltd - Caleffi Group
Address
Mustang Drive, Stafford Staffordshire
Postcode
ST16 1GW
Country
England
Phone
+44 (0)1785 218200
General Email
specifications@altecnic.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 9

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.