Range of below ground hose union taps within a chamber incorporating a brass spherical valves, hose connector and MDPE couplings. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C

Section:

1530 Miscellaneous Fittings

Size:

see model

Marking:

Arrow Valves on adhesive label on top of body

Installation Requirements:

R001 R090

Expiry date:

30/04/2025

Model:

HUBG 15mm x 20mm HUBG 15mm x 25mm HUBG 20mm x 25mm HUBG 20mm x 32mm

Approval Holder:

Arrow Valves Ltd

Company Name

Arrow Valves Ltd

Address

York House Northbridge Road Berkhamsted Hertfordshire

Postcode

HP4 1TA

Country

Herts

Phone

01442 823 123

General Email

enquiries@arrowvalves.co.uk

View All Listings by this Company

Manufacturer:

Arrow Valves Ltd

Company Name

Arrow Valves Ltd

Address

York House Northbridge Road Berkhamsted Hertfordshire

Postcode

HP4 1TA

Country

Herts

Phone

01442 823 123

General Email

enquiries@arrowvalves.co.uk

View All Listings by this Company

Range of stainless-steel bellows with screwed ends. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

½” - 2” BSP (M)

Marking:

Engineered Products and Solutions LTD, flow arrow and 16 bar on label on body.

Installation Requirements:

R001

Expiry date:

30/04/2025

Model:

EPS50

Approval Holder:

Engineered Products and Solutions LTD

Company Name

Engineered Products and Solutions LTD

Address

Unit 15 Cedar Court Halesfield 17 Telford

Postcode

TF74FP

View All Listings by this Company

Top entry compression cylinder flange with DZR brass body and copper anti-aeration dip tube. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

Section:

1530 Miscellaneous Fittings

Size:

1” BSP male inlet with optional 1” BSP female connector to a 28mm compression fitting outlet with 22mm adapter ring.

Marking:

S (Salamander logo) and CR on body. Salamander Pumps on compression nuts.

Installation Requirements:

R001

Expiry date:

30/04/2025

Model:

Salamander ‘S’ Flange

Approval Holder:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Phone

0191 516 2002

View All Listings by this Company

Range of flow sensors with plastic bodies and plastic turbines. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2004047

Size:

17mm x 17mm

Marking:

GEMS, CE and date of manufacture (WW/YY) on adhesive label. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

30/04/2025

Model:

FT-110

Approval Holder:

Gems Sensors & Controls

Company Name

Gems Sensors & Controls

Address

1 Cowles Road Plainville Connecticut

Postcode

06062

Country

United States

Phone

+1 860-793-4304

General Email

dennis.hosaka@gemsensors.com

View All Listings by this Company

Range of pressure transmitters with stainless steel bodies and EPDM ‘O’-rings. Maximum working pressures: 520 XXX range 100.0 bar, 522 XXX range & 540 XXX range 60.0 bar. Maximum operating temperature 520 XXX & 522 XXX range 99°C & 540 XXX range 80°C.

Section:

1530 Miscellaneous Fittings

Size:

G½” sealed at front with manometer, G½” sealed at front, 7/16” -20 UNF sealing cone, ¼” -18 NPT sealing thread, G¼” sealed at front, G¼” sealed at back DIN 3852-E, R¼” sealing thread EN 10226, ¼” -18 NPT inside sealing thread, M20x1.5 sealed at front with manometer, ¼” -14 NPT inside sealing thread, G¼” sealed at front with manometer, 1/8” -27 NPT sealing thread, G1/8” sealed at front, G¼” sealed at front, G¼” sealed at back DIN 3852-E with manometer, 7/16” -20 UNF inside sealed at front SAE J1926-1 / ISO 11926-1, 7/16” -20 UNF inside sealing cone with Schrader, 7/16” -20 UNF inside sealing cone, ½” -14 NPT sealing thread, G¼” sealed back.

Marking:

520 and 522 models: HUBA CONTROL, article number and date of manufacture (YY/MM/DD) on body. 540 models: HUBA CONTROL on adhesive label on face. Article number and date of manufacture (YY/MM) on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/04/2025

Model:

520 XXX, 522 XXX & 540 XXX ranges. ‘XXX’ is replaced with various numbers denoting pressure range, application, power supply, electrical connections and other parameters which do not relate to water contact

Approval Holder:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Crane brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Size:

¼" BSP (M) taper threaded.

Marking:

Crane logo, WRAS and temperature on plastic tag.

Installation Requirements:

R001

Expiry date:

31/08/2025

Model:

Crane P84 Pressure Test Points.

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Phone

01473 277 364

General Email

bwiggins@crane-ltd.co.uk

View All Listings by this Company

Hattersley brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Size:

¼" BSP (M) taper threaded.

Marking:

Hatterlsley logo, WRAS and temperature on plastic tag.

Installation Requirements:

R001

Expiry date:

31/08/2025

Model:

Hattersley Fig 631 PRESSURE TEST POINTS

Approval Holder:

Hattersley

Company Name

Hattersley

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

View All Listings by this Company

‘Cart’ range of plastic flow regulators within a plastic housing and either silicone, EPDM or NBR sealing gaskets and optional stainless steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Size:

14.68mm OD

Marking:

Neoperl on body.

Installation Requirements:

R001

Expiry date:

31/05/2025

Model:

cart - AB.CDEF.GHIJK Where: AB – denotes 31 CDEF – manufacturers sequential number GHIJK – packaging variations

Approval Holder:

Neoperl UK

Company Name

Neoperl UK

Address

View All Listings by this Company

Manufacturer:

Neoperl UK

Company Name

Neoperl UK

Address

View All Listings by this Company

Wall plate elbow (105° angle) with a brass body. Maximum operating temperature 100°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2005327

Size:

½” BSP (F) x 15mm compression serrated hose connection.

Marking:

Interplast logo on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2025

Model:

800011620

Approval Holder:

Interplast SA

Company Name

Interplast SA

Address

10th KM National Road THessaloniki Katerni PO Box 62

Country

57400 Sindos

Phone

+30 2310 795531 Fax: +30 31 795373

General Email

lab@interplast.gr

View All Listings by this Company

Manufacturer:

Interplast SA

Company Name

Interplast SA

Address

10th KM National Road THessaloniki Katerni PO Box 62

Country

57400 Sindos

Phone

+30 2310 795531 Fax: +30 31 795373

General Email

lab@interplast.gr

View All Listings by this Company

Manifold with a brass body and 5 outlets. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

1” BSP (F) inlets x 1/2” BSP (F) outlets

Marking:

1” Elviom on body

Installation Requirements:

R001

Expiry date:

31/05/2025

Model:

589403400051

Approval Holder:

Interplast SA

Company Name

Interplast SA

Address

10th KM National Road THessaloniki Katerni PO Box 62

Country

57400 Sindos

Phone

+30 2310 795531 Fax: +30 31 795373

General Email

lab@interplast.gr

View All Listings by this Company

Manufacturer:

Interplast SA

Company Name

Interplast SA

Address

10th KM National Road THessaloniki Katerni PO Box 62

Country

57400 Sindos

Phone

+30 2310 795531 Fax: +30 31 795373

General Email

lab@interplast.gr

View All Listings by this Company