Wall mounted, exposed, two-hole single outlet, fixed, combination tap assemblies (brass body – various finishes) incorporating two ‘detent’ (push to on push to off) headworks, one controlling the flow to the bath outlet and the other to the shower outlet. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets and the shower outlet incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate a stainless-steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0540 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and shower outlet.

WRAS Approval Number:

240904101

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Gen Tapp on top of body.

Metals:

Approval holder declares that all metals in water pathway are on the positive list

Lead:

Approval holder declares that all metals in water pathway are lead free

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2029

Model:

CD 222 XXX Recessed shower control Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

General Email

j-doe@gtapp.com

View All Listings by this Company

Manufacturer:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

General Email

j-doe@gtapp.com

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Deck Mounted Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. Supplied with click type waste, Not Tested Tap Gap AUK3 when installed in line with the IRN's

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Installation Requirements:

R001 R005 R010

Expiry date:

31/01/2030

Product Images

Approval Holder:

WRAS

Company Name

WRAS

Address

General Email

jason.furnival@wras.co.uk

View All Listings by this Company

Manufacturer:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

General Email

j-doe@gtapp.com

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Deck Mounted Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. Supplied with click type waste, Not Tested Tap Gap AUK3 when installed in line with the IRN's

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Installation Requirements:

R001 R005 R010

Expiry date:

31/01/2030

Approval Holder:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

General Email

j-doe@gtapp.com

View All Listings by this Company

Manufacturer:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

General Email

j-doe@gtapp.com

View All Listings by this Company

Section:

0684 Combination Tap Assemblies

Description:

A Range of Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.

Deck Mounted Infra red controlled Stainless steel braided PEX lined flexible hose assembly with a 3/8” BSP (F) end connections. The Xeris models (012930699 & 012940699) incorporate a check valve cartridge in the inlet hose, however the complete assembly has not been tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

001 006 009

Expiry date:

28/02/2030

Notes & Further Information

The difference between the article 02172 series and 02173 series is the power supply: 02172 series is with battery pack and 02173 series is with power adapter. The difference between the article 0699 and 0613 is only the package for different distribution targets. Two infrared modules are used. The modules used in article 01200, 01212, 01230, 01231, 01293 and 01294 are identical The modules used in article 02168, 02169, 02172 series and 02173 series are identical

Approval Holder:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

General Email

j-doe@gtapp.com

View All Listings by this Company

Manufacturer:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

General Email

j-doe@gtapp.com

View All Listings by this Company

Section:

0465 Combination Tap Assemblies

Description:

A Range of Single hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

big tap deck mounted ~AUK 2

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/03/2030

Notes & Further Information

Test this works now

Product Images

Approval Holder:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

General Email

j-doe@gtapp.com

View All Listings by this Company

Manufacturer:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

General Email

j-doe@gtapp.com

View All Listings by this Company