Pressure gauge with a plastic case, brass connector and bronze spring tube. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

⅜” BSP (M)

Marking:

Pegler (Brand of Aalberts integrated piping systems Ltd.) on gauge face.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

Pegler Prestex pressure Gauge (5A2003)

Product Images

Approval Holder:

Aalberts Integrated Piping Systems BV

Company Name

Aalberts Integrated Piping Systems BV

Address

OUDE AMERSFOORTSEWEG 99 1212 AA HILVERSUM PO BOX 498

View All Listings by this Company

VSH XPRESS Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106049

Size:

12mm - 108mm.

Marking:

DVGW, XPRESS & SIZE ON BODY

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

7001 22, 7002 22, 7001 15, 7002 15, 7040 22, 7130 15 & 7130 22 PRESS FITTINGS 6270 Copper Press Coupling: 12 - 108mm. 6271 Copper Press Coupling: 12 - 54mm. 6240 Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001 Bend 90° x press: 12-108mm. 6002 Bend 90° press x press: 12 - 108mm. 6130 Equal Tee 3 x press: 12 - 108mm. 6040 Bend 45° x press: 12 - 108mm. 6041 Bend 45° press x press: 12 - 108mm. 6301 Endcap press: 12 - 108mm. 6131 Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 Flange PN16: 76.1mm.

Approval Holder:

Aalberts Integrated Piping Systems BV

Company Name

Aalberts Integrated Piping Systems BV

Address

OUDE AMERSFOORTSEWEG 99 1212 AA HILVERSUM PO BOX 498

View All Listings by this Company

‘Xpress’ range of press fit fittings with copper or brass bodies and EPDM ‘O’-rings. For use with copper tube manufactured to EN1057. For above ground ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201304

Size:

see model

Marking:

Brass fittings: Xpress and size on body. Copper fittings: Xpress, size and Kitemark logo on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Code Sl/7270 Sl/72705 SlR/7240 56/7243 S12/7002A S12S/7001A S2/6270G S3/6243G S7/6246G S8/6280G Description Straight coupling Straight coupling slip pattern Straight reducing coupling Reducer Elbow Street elbow Straight female connector Straight male connector Female adaptor Male Adaptor Sizes 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -64mm 15mm -108mm 15mm -54mm 15mm-42mm Copper/ Copper Copper Copper Copper Copper Copper Gunmetal Gunmetal Gunmetal Gunmetal S11/6330 S13/6092G S14/6090G Union coupling Male elbow Female elbow 15mm -54mm 15mm -54mm 15mm -54mm Gunmetal Gunmetal Gunmetal S15/6472G Backplate elbow 15mm - 22mm Gunmetal SlFMF/7510 Composite female metric flange 67mm -108mm Copper SlFMM/7520 Composite female metric flange 67mm -108mm Copper S12R/7002A S15L/6472L Reducing Elbow Elbow 22mm x 15mm ½” and 3/4" Copper Gunmetal 519/7005 Bend 15mm-28mm Copper 521/7041 Obtuse Elbow 12mm-108mm Copper 5215/7040 Obtuse Street Elbow 12mm-108mm Copper 522/7086 Partial Crossover 15, 18 and 22mm Copper 5225/7087 Crossover 15, 18 and 22mm Copper 523/7085 Full Crossover 15, 18 and 22mm Copper 524/7130 Equal Tee 12mm-108mm Copper 525/7130 Tee Reducer Branch 15mm-108mm Copper 526/7130 Tee One End Reducer 15mm-35mm Copper 526/7130 Tee One End And Branch Reducer 15mm-54mm Copper 528/7130 S30/130G 560/7301 Tee Both Ends Reducer Female Branch Tee Stop End 12mm-28mm 12mm-108mm 35mm-54mm Copper Gunmetal Copper 561/7301 Stop End 12mm-108mm Copper S65F/6096G Elbow 12mm-54mm Gunmetal S68FF/6359 S69/6331G S69F/6330G Union Straight Male Union Connector Straight Female Union Connector 15mm-54mm 12mm-54mm 12mm-54mm Gunmetal Gunmetal Gunmetal

Product Images

Approval Holder:

Aalberts Integrated Piping Systems BV

Company Name

Aalberts Integrated Piping Systems BV

Address

OUDE AMERSFOORTSEWEG 99 1212 AA HILVERSUM PO BOX 498

View All Listings by this Company

Kuterlite K900 Pro range of compression fittings with DZR brass bodies for use with copper pipe (EN 1254) Maximum working pressure for 8mm-10mm = 70.0 bar. Maximum working pressure for 12mm – 28mm = 20.0 bar. Maximum working pressure for 35mm – 54mm = 6.0 bar. Maximum operating temperature 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206027

Size:

Please refer to model.

Marking:

Kuterlite PRO, Flow arrow, EN 1254-2 and size on nut. CR on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

K910X: Straight Coupling 10mm to 54mm K911X: (M) Coupling 12mm to 54mm x ¼” BSP (M) to 2” BSP (M) K911PX: (M) Coupling 8mm to 54mm x ½” BSP (F) to 2” BSP (F) K911LBX: Long Tank Coupling 22mm x ¾” BSP (M) & 28mm x 1” BSP (M) K911TCX: Tank Coupling 15mm to 54mm x ½” BSP (M) to 2” BSP (M) K912X: (F) Coupling 12mm to 54mm x 3/8” BSP (F) to 2” BSP (F) K915X: Elbow 12mm to 54mm K916X: (M) Elbow 12mm to 54mm x 3/8” BSP (M) to 2” BSP (M) K916PX: (M) Elbow 15 to 28mm x ½” BSP (M) to 1” BSP (M) K916LBX: Long (M) Elbow 22mm x ¾” BSP (M) K917X: (F) Elbow 12mm to 42mm x 3/8” BSP (F) to 1.1/2” BSP (F) K917WX: (F) Wall Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918X: Equal Tee 10mm to 54mm K918BX: Tee (Reduced) 15mm to 54mm K918EBX: Tee End & Branch 15mm to 28mm K918EEX: Tee (Both Reduced) 12mm to 22mm K920X: (M) End Tee 15mm x ½” BSP (M) x 15mm K920HX: (M) Branch Tee 15mm x 15mm x ½” BSP (M) K923X: Cross 15mm KS926X: Swivel Tap Connector 15mm x ½” BSP (M) to ¾” BSP (M) & 22mm x ¾” BSP (M) K927X: Bent Tap Connector 15mm x ½” BSP (M) & 22mm x ¾” BSP (M) K930X: (F) Branch Tee 15mm to 28mm x 15mm to 28mm x ¼” BSP (F) to 1” BSP (F) K930EX: (F) End Tee 15mm to 28mm x ½” BSP (F) to ¾” BSP (F) x 15mm to 28mm K941X (F) Adaptor 22mm x ¾” BSP (F) K947X: Reducer 8mm to 28mm K948: Reducing Set 22mm to 28mm K949: Reducing Set 35mm to 54mm KS950X: Tank Connector 15mm to 54mm K951X: Stop End 12mm to54mm K953X: Crossover 15mm K972X: Blanking Plug 15mm to 54mm K1870X: Kufit Adaptor 15mm to 22mm K915XCP: Elbow 15mm & 35mm K917WXCP: Backplate Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918XCP: Equal Tee 15mm K918BXCP: Tee (Reduced) 15mm to 28mm K947XCP: One Piece Reducer 15mm to 22mm

Product Images

Approval Holder:

Aalberts Integrated Piping Systems BV

Company Name

Aalberts Integrated Piping Systems BV

Address

OUDE AMERSFOORTSEWEG 99 1212 AA HILVERSUM PO BOX 498

View All Listings by this Company

Spherical valve with DZR brass body and butterfly operating member, for use with copper tube (manufactured to EN 1057). The valve incorporates a drain valve. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2209700

Size:

15mm compression.

Marking:

Pegler logo (brand of Aalberts), PN and DR on body

Installation Requirements:

R001 R511

Expiry date:

30/09/2027

Model:

PB360WMK – 254360 PB360.

Approval Holder:

Aalberts Integrated Piping Systems BV

Company Name

Aalberts Integrated Piping Systems BV

Address

OUDE AMERSFOORTSEWEG 99 1212 AA HILVERSUM PO BOX 498

View All Listings by this Company