Range of brass stopcock incorporating EPDM and PTFE washers. Compression connections, to be used with copper pipe EN1057 only. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2304354

Size:

see model

Marking:

TS, size, EN1213, flow arrow, date of manufacture: MM-YY, EN1254-2, size stamped on body and nut.

Installation Requirements:

R001 R120

Expiry date:

30/04/2028

Model:

38361 - 15MM X 25MM BRASS, 11228 - 22MM X 25MM BRASS,

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company

In-line spherical valve with a chrom eplasted DZR brass body, brass ball and EPDM ‘O’-rings, incorporating a single check valve cartridge (verified by test, suitable for fluid catergory 2) with a lever operating member. To be used with copper pipe manufactured to EN1057. verified Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2206381

Size:

15MM compression × 3/4" BSP (M)

Marking:

TS, CR, on body; flow arrow, date of manufacture (MM-YY) on body

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

39703

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener or plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65˚C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2402805

Size:

Stainless steel braided EPDM/PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

ebb & flo on Body.

Installation Requirements:

R001 R006 R010

Expiry date:

28/02/2029

Model:

38842 Ladram Mono Mixer Kitchen Tap

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company

Range of two hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn headworks with various type operating members and a manual diverter to shower outlet. The spout outlets incorporate either a plastic flow straightener or plastic aerator. Model (173605) has an open outlet type spout. The products are supplied with metal backnuts, shower hose and handset. Maximum working pressure 10 bar. Maximum operating temperature 65°C but 70°C for models 173605, 173605 MBK1 and M33145E

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

2312369

Size:

¾ BSP (M)

Marking:

ebb & flo on body

Installation Requirements:

R001 R006 R020

Expiry date:

31/12/2028

Model:

90412 Cobo Bath Shower Mixer

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company