Range of double check valve assemblies consisting of two spring loaded in-line check valve cartridges housed in a DZR brass body with a drain port between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

2005045

Size:

See model.

Marking:

TS, CR FLOW ARROW & SIZE ON BODY SIZE ON END NUT

Installation Requirements:

R001

Expiry date:

31/05/2025

Model:

86881: 15mm compression inlet/outlet, 61921: 22mm compression inlet/outlet,

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007077

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

ebb & flo (brand of Toolstation) on tap body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2025

Model:

20761

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a non-rising spindleheadwork with crosstop type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010403

Size:

Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.

Marking:

ebb & flo on tap base

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

49944

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass). Incorporation a ceramic disc headwork with dome type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010404

Size:

Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.

Marking:

ebb & flo on base of tap

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

88081 COLWELL MONO MIXER COMINATION TAP ASSEMBLY

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a ceramic disc headwork with lever type operating members.The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010405

Size:

Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.

Marking:

ebb & flo on base of tap

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

26251 Seaton Mono Mixer Kitchen COMINATION TAP ASSEMBLY

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

View All Listings by this Company