In-line plastic flow regulator housed within a brass body (chrome plated) or stainless steel body (HL2024 Cradle model only) incorporating a plastic strainer and EPDM ‘O’-rings. HL2024 Inline 1P BSP threaded models also have NBR/fibre gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2005044

Size:

HL2024 Inline 1P models: ½” BSP (F) inlet to ½” BSP (M) outlet, ½” BSP (M) inlet to ½” BSP (F) outlet, 15mm compression inlet/outlet, ¾” BSP (M) inlet/outlet. HL2024 Connect: ¾” BSP (F) inlet to ¾” BSP (M) outlet. HL2024 Connect-S 7.5: ½” BSP (M) inlet offset to ¾” BSP (M) outlet. HL2024 Inline Cartridge 3P & HL2024 Cradle 3P: ½” BSP (M) inlet/outlet machined to accept a 15mm compression nut and olive (not supplied or considered part of the approval listing).

Marking:

HL2024 Connect model 3/4": HL2024 (brand of HGP), flow arrow and Kiwa engraved on body. HL2024 Connect-S 7.5 1-2 3-4 model: HL2024 (brand of HGP) and flow rate embossed on body. All other models: HL2024 (brand of HGP), flow arrow & flow rate on adhesive label on body. Models HL2024 Control Flow 1P & HL2024 Control Flow 3P - HL2024 (brand of HGP), flow arrow & flow rate on adhesive label on body. HL2024 Thermastream model - HL2024 (brand of HGP), flow arrow and Kiwa engraved on body. HL2024 Thermastream S7 model - HL2024 (brand of HGP) and flow rate embossed on body.

Installation Requirements:

R001

Expiry date:

31/05/2025

Model:

HL2024 Inline 1P. HL2024 Connect. HL2024 Connect-S 7.5. HL2024 Inline Cartridge 3P. HL2024 Cradle 3P. Models added August 2020: HL2024 Control Flow 1P 1/2‘‘ f-m HL2024 Control Flow 1P 1/2‘‘ m-f HL2024 Control Flow 1P 15mm HL2024 Control Flow 1P 3/4‘‘ HL2024 Thermastream 3/4‘‘ HL2024 Thermastream S7.5 1/2’’-3/4’’ HL2024 Control Flow 3P 15mm

Approval Holder:

HaGePe International B.V (HGP International)

Company Name

HaGePe International B.V (HGP International)

Address

Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company

Manufacturer:

HaGePe International B.V (HGP International)

Company Name

HaGePe International B.V (HGP International)

Address

Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company

Range of in-line plastic flow regulators. The flow regulator is housed within a black plastic body incorporating a plastic strainer and an EPDM ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Size:

¾” BSP (M)

Marking:

Flow arrow, flow rate, HL2024 (brand of HGP), connection size and connection type on adhesive label on body. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

HL2024 Inline Cartridge 3P 3-4 EC EP. HL2024 Control Flow 3P 3-4 EC EP. HL2024 Inline Cartridge 3P 3-4 FL EP. HL2024 Control Flow 3P 3-4 FL EP. Where: EC = BSPP ¾” Euroconus. FL = BSPP ¾” Flat Faced.

Product Images

Approval Holder:

HaGePe International B.V (HGP International)

Company Name

HaGePe International B.V (HGP International)

Address

Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company

Manufacturer:

HaGePe International B.V (HGP International)

Company Name

HaGePe International B.V (HGP International)

Address

Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company

Flow regulator with a plastic body. 4.0 - 8.5L/min. Claims of flow regulation performance made by manufacturer have note been tested and are not covered as part of this approval.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2305913

Size:

Ø20.37 x 19.33mm

Marking:

HL2024 FC (brand of HaGePe) on body

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

HL2024

Approval Holder:

HaGePe International B.V (HGP International)

Company Name

HaGePe International B.V (HGP International)

Address

Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company