Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headworks and single lever operating members. The outlet incorporates a plastic flow straighter or aerator and the product is supplied with a coin type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004068

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

INSTINCT on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2025

Model:

4E1022 KISO MONO BASIN SINK MIXER- COMBINATION TAP ASSEMBLY

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Deck mounted pillar tap (chromium plated brass), incorporating a ¼ turn ceramic disc headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with a metal backnut. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap.

WRAS Approval Number:

2004069

Size:

½” BSP (M)

Marking:

INSTINCT on operating member

Installation Requirements:

R001 R006

Expiry date:

30/04/2025

Model:

4e1024 KISO BASIN PILLAR TAP PAIR

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2010085

Size:

¾” BSP (M)

Marking:

Instinct on operating member.

Installation Requirements:

R001 R006 R030

Expiry date:

31/10/2025

Model:

4E1155 ESPADA BSM - COMBINATION TAP ASSEMBLIES

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with a shower hose, shower handset and metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2010086

Size:

¾” BSP (M)

Marking:

Instinct on operating member.

Installation Requirements:

R001 R006 R030

Expiry date:

31/10/2025

Model:

4E1145 - Waterfall H Pattern BSM

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate either a plastic flow straightener or aerator. The product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010087

Size:

Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.

Marking:

INSTINCT ON OPERATNG MEMBER

Installation Requirements:

R001 R005 R010

Expiry date:

31/10/2025

Model:

4E1283 - ELION BASIN MONO & 4E1284 - ELION BASIN MINI MONO COMBINATION TAP ASSEMBLIES

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener or optional aerator. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2010088

Size:

¾” BSP (M)

Marking:

INSTINCT ON OPERATING MEMBER

Installation Requirements:

R001 R006 R030

Expiry date:

31/10/2025

Model:

4E1286 - ELION DESK BSMCOMBINATION TAP ASSEMBLIES

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener with an optional aerator. Fittings are supplied with a pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011087

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

INSTINCT on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2025

Model:

4E1121 -PARAGON MONO BASIN MIXER & 4E1122 - PARAGON TALL MONO BASIN MIXER

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Deck mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener or an optional aerator. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2011088

Size:

¾” BSP (M)

Marking:

INSTINCT on operating member.

Installation Requirements:

R001 R005 R030

Expiry date:

30/11/2025

Model:

4E1124 - PARAGON BATH SHOWER MIXER

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener with an optional aerator. Fittings are supplied with a pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011089

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

ESTEEM on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2025

Model:

E60056 - CANIM MONO BASIN MIXER & E60057 - CANIM TALL MONO BASIN MIXER

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Deck mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener or an optional aerator. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2011090

Size:

¾” BSP (M)

Marking:

ESTEEM on operating member.

Installation Requirements:

R001 R005 R030

Expiry date:

30/11/2025

Model:

E60059 - CANIM BATH SHOWER MIXER

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

'INST61427N & INST61425T Tapes'. White coloured (semi-translucent), extruded PTFE tape. For use with water up to 85°C.

Section:

5294 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Components.

WRAS Approval Number:

2309508

Expiry date:

30/09/2028

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of pillar taps, (chrome plated, brass bodies), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal back nuts. Maximum operating pressure 6 bar. Maximum operating temperature 85°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309375

Size:

½” BSP

Marking:

Instinct (Brand of PHG) on operating member.

Installation Requirements:

R001 R005

Expiry date:

30/09/2028

Model:

4E1003 - DELLA BASIN TAP PAIR 4E1004 - DELLA BATH TAP PAIR

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of two-hole, double outlet, fixed combination tap assemblies (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks with single lever operating members. The products are supplied with metal back nuts. Maximum operating pressure 6 bar. Maximum operating temperature 85°C

Section:

0560 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a double outlet and a fixed spout.

WRAS Approval Number:

2309376

Size:

3/4” BSP

Marking:

Instinct (Brand of PHG) on operating member.

Installation Requirements:

R001 R006

Expiry date:

30/09/2028

Model:

4E1005 – DELLA BATH FILLER

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet, fixed combination tap assembly, (chrome plated brass bodies) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate aerators and plastic flow straighteners. The products are supplied with a click type pop-up waste. Maximum working pressure 16 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2310391

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Instinct (Brand of PHG) on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2028

Model:

4E1001 - DELLA MINI MONO BASIN 4E1002 - DELLA MONO BASIN

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet, (swivel) combination tap assembly (chrome plated brass bodies) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2310396

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections

Marking:

Instinct on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2028

Model:

4E7010 – Keal Kitchen Mixer Chrome 4E7009 – Cullin Kitchen Mixer Chrome 4E7004 – Kiso Kitchen Mixer Chrome

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of two-hole, single outlet, fixed, combination tap assemblies, (chrome plated brass bodies), incorporating quarter turn cermic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products are supplied with a shower hose and shower handset. Maximum working pressure 6 bar. Maximum operating temperature 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2312368

Size:

¾” BSP (M)

Marking:

INSTICT BRAND OF PHG ON OPERATING MEMBER.

Installation Requirements:

R001 R006 R030

Expiry date:

31/12/2028

Model:

4E1006 – DELLA BATH & SHOWER MIXER

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company