Water Regulations Approval Scheme Ltd

Brymec Ltd Approvals

WRAS Approval Number: #2107585

'Brymec PVC Solvent Cement'. Clear, transparent (un-pigmented) solvent cement, (intended to join PVC pipe and fittings). Apply as per manufacturer's instructions 'TDS Brymec CEMENT Rev 01' review date '27-05-2022'. Cure for 20 days at 7°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5560 Solvent Cements
Expiry date:: 31/07/2026

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Unit C Redlands Centre, Coulsdon, Surrey
Postcode
CR5 2HT

View All Listings by this Company

WRAS Approval Number: #2012108

Range of brass press fittings with EPDM ‘O’-rings for use with EN ISO 21003 pipe. Maximum working pressure 10.0 bar. For cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2012108
Size:: Please refer to model.
Marking:: Brymec logo, size & Crimp Profiles (U-TH-H) on crimp sleeve.
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: 51019 ∙ 16mm Brass Coupler Multilayer Crimp Fitting 51020 ∙ 20mm Brass Coupler Multilayer Crimp Fitting 51018 ∙ 25mm Brass Coupler Multilayer Crimp Fitting 51022 ∙ 32mm Brass Coupler Multilayer Crimp Fitting 51028 ∙ 20x16mm Reducing Coupler Multilayer Crimp Fitting 51040 ∙ 25x16mm Reducing Coupler Multilayer Crimp Fitting 51038 ∙ 25x20mm Reducing Coupler Multilayer Crimp Fitting 51031 ∙ 32x16mm Reducing Coupler Multilayer Crimp Fitting 51032 ∙ 32x20mm Reducing Coupler Multilayer Crimp Fitting 51039 ∙ 32x25mm Reducing Coupler Multilayer Crimp Fitting 51044 ∙ 16mm Brass 90 Elbow Multilayer Crimp Fitting 51045 ∙ 20mm Brass 90 Elbow Multilayer Crimp Fitting 51043 ∙ 25mm Brass 90 Elbow Multilayer Crimp Fitting 51047 ∙ 32mm Brass 90 Elbow Multilayer Crimp Fitting 51058 ∙ 16mm Brass Equal Tee Multilayer Crimp Fitting 51059 ∙ 20mm Brass Equal Tee Multilayer Crimp Fitting 51042 ∙ 25mm Brass Equal Tee Multilayer Crimp Fitting 51061 ∙ 32mm Brass Equal Tee Multilayer Crimp Fitting 51140 ∙ 16x16x20mm Reducing Ends Tee Multilayer Crimp 51142 ∙ 20x16x16mm Reducing End & Branch Tee Multilayer Crimp 51121 ∙ 20x20x16mm Reducing Branch Tee Multilayer Crimp 51137 ∙ 20x20x25mm Reducing Ends Tee Multilayer Crimp 51147 ∙ 25x20x20mm Reducing End & Branch Tee Multilayer Crimp 51124 ∙ 25x25x16mm Reducing Branch Tee Multilayer Crimp 51125 ∙ 25x25x20mm Reducing Branch Tee Multilayer Crimp 51129 ∙ 32x32x20mm Reducing Branch Tee Multilayer Crimp 51130 ∙ 32x32x25mm Reducing Branch Tee Multilayer Crimp 51155 ∙ 16mm x 1/2" Female Iron Branch Tee Multilayer Crimp 51156 ∙ 20mm x 1/2" Female Iron Branch Tee Multilayer Crimp 51157 ∙ 25mm x 3/4" Female Iron Branch Tee Multilayer Crimp 51081 ∙ 16mm x 1/2" Male Iron Multilayer Crimp Coupler 51083 ∙ 20mm x 1/2" Male Iron Multilayer Crimp Coupler 51084 ∙ 20mm x 3/4" Male Iron Multilayer Crimp Coupler 51082 ∙ 25mm x 3/4" Male Iron Multilayer Crimp Fitting 51085 ∙ 25mm x 1" Male Iron Multilayer Crimp Fitting 51088 ∙ 32mm x 1" Male Iron Multilayer Crimp Coupler 51067 ∙ 16mm x 1/2" Female Iron Multilayer Crimp Coupler 51069 ∙ 20mm x 1/2" Female Iron Multilayer Crimp Coupler 51070 ∙ 20mm x 3/4" Female Iron Multilayer Crimp Coupler 51095 ∙ 25mm x 3/4" Female Iron Multilayer Crimp Fitting 51068 ∙ 25mm x 1" Female Iron Multilayer Crimp Fitting 51073 ∙ 32mm x 1" Female Iron Multilayer Crimp Coupler 51096 ∙ 16mm x 1/2" Male Iron Elbow Multilayer Crimp Fitting 51098 ∙ 20mm x 3/4" Male Iron Elbow Multilayer Crimp Fitting 51099 ∙ 25mm x 1" Male Iron Elbow Multilayer Crimp Fitting 51171 ∙ 16mm x 1/2" Backplate Elbow Multilayer Crimp 51173 ∙ 20mm x 3/4" Backplate Elbow Multilayer Crimp 51108 ∙ 16mm x 1/2" Female Iron Elbow Multilayer Crimp Fitting 51107 ∙ 20mm x 1/2" Female Iron Elbow Multilayer Crimp Fitting 51109 ∙ 20mm x 3/4" Female Iron Elbow Multilayer Crimp Fitting 51105 ∙ 25mm x 3/4" Female Iron Elbow Multilayer Crimp Fitting 51106 ∙ 25mm x 1" Female Iron Elbow Multilayer Crimp Fitting

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Unit C Redlands Centre, Coulsdon, Surrey
Postcode
CR5 2HT

View All Listings by this Company

WRAS Approval Number: #2005052

Range of screw down stop valves with brass bodies. Fittings incorporate EPDM seat washers and PTFE seals. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 2310 Valves
Section Subtitle:: Stop, metal, screw down.
WRAS Approval Number:: 2005052
Size:: ½” - 2” BSP (F) 15mm - 54mm compression 15mm - 20mm compression 15mm - 25mm compression 22mm - 25mm compression
Marking:: WRAS, FLOW ARROW & SIZE ON BODY BRYMEC & SIZE ON END NUT
Installation Requirements:: R001
Expiry date:: 31/05/2025
Model:: Compression stop cock for use with copper pipe: 36384, 36385 & 36386

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Unit C Redlands Centre, Coulsdon, Surrey
Postcode
CR5 2HT

View All Listings by this Company

WRAS Approval Number: #2204711

Range of lock shield or handwheel operated gate valves with brass bodies, gate & PTFE seals, for use with copper tube manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 2204711
Size:: see model
Marking:: WRAS, FLOW ARROW & SIZE ON BODY BRYMEC & SIZE ON COMPRESSION NUT
Installation Requirements:: R001
Expiry date:: 30/04/2027
Model:: Gate valve: 30813 – 15MM 30814 – 22MM 30815 – 28MM Lock shield Gate valve : 30700 – 15MM 30707 – 22MM 30299 – 28MM

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Unit C Redlands Centre, Coulsdon, Surrey
Postcode
CR5 2HT

View All Listings by this Company

WRAS Approval Number: #2010112

Range of in-line `Y`-patterned strainers with brass bodies incorporating a stainless steel mesh strainer and a PTFE washer. Maximum working pressure 25.0 Bar. Maximum operating temperature 99.0°C

Section:: 1715 Strainers
Size:: See model.
Marking:: Brymec logo, PN, DN, flow arrow and size on body.
Installation Requirements:: R001 R120
Expiry date:: 31/10/2025
Model:: Brass: 36233: ½” BSP (F). 36234: ¾” BSP (F). 36235: 1” BSP (F). 36236: 1¼” BSP (F). 36237: 1½” BSP (F). 36238: 2” BSP (F).

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Unit C Redlands Centre, Coulsdon, Surrey
Postcode
CR5 2HT

View All Listings by this Company