TEST SITE

Gessi S.p.A. Approvals


#2210355

Range of wall mounted spout outlets with stainless steel bodies incorporating plastic aerators. Maximum operating temperature 60°C

Section:
0682
WRAS Approval Number:
2210355
Size:
½” BSP (M) connection.
Marking:
Gessi on back plate.
Installation Requirements:
R001 R040
Expiry date:
31/10/2027
Model:
54010 54110
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2211307

Wall mounted shower outlet elbow with a chromium plated brass body incorporating EPDM ‘O’-rings. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2211307
Size:
½” BSP (M).
Marking:
Gessi, Emporio on back plate.
Installation Requirements:
R001 R040
Expiry date:
30/11/2027
Model:
38761.
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2211308

Over head shower outlet with a chromium plated brass body, with a swivel function. Inlet incorporates NBR gasket with stainless-steel strainer and a flow regulator. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2211308
Size:
½”BSP (M).
Marking:
Gessi on back plate.
Installation Requirements:
R001 R040
Expiry date:
30/11/2027
Model:
47289.
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2303324

Range of single hole, single outlet fixed combination tap assemblies, (chrome plated brass bodies), incorporating a ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Models (63301, 63501, 63303, 63503, 63305 & 63505 are supplied with lever operated pop-up waste) Maximum working pressure 5 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303324
Size:
Stainless steel braided PEX lined flexible hoses with 3/8” captive nut end connections. 3/8” BSP (M) x ½” (F) adaptor
Marking:
Gessi logo etched on handle
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2028
Model:
63301 (anello) with waste 63302 (anello) 63501 (ingranaggio) with waste 63502 (ingranaggio) 63303 (anello) with waste 63304 (anello) 63503 (ingranaggio) with waste 63504 (ingranaggio) 63305 (anello) with waste 63306 (anello) 63505 (ingranaggio) with waste 63506 (ingranaggio)

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2303351

Range of single hole, single outlet (swivel) combination tap assemblies, (chrome plated brass bodies), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303351
Size:
Strainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connection incorporating 3/8” BSP (M) x ½” BSP (F) adapter
Marking:
Gessi on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2028
Model:
60431 60481 60461

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2301345

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chrome plated) and pull-out spray. The products incorporate a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2301345
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Gessi on operating member
Installation Requirements:
R001 R009 R010 R090
Expiry date:
31/01/2028
Model:
60433, 60435, 60485 & 60465

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2309332

Range of wall mounted shower outlets (various finishes). The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2309332
Size:
½” BSP (M)
Marking:
Gessi etched on shower body
Installation Requirements:
R001 R040
Expiry date:
30/09/2028
Model:
57203 57213 57223 57233 57243 57263

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 4 of 4

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.