TEST SITE

Gessi S.p.A. Approvals


#2206336

Two-hole, single outlet (fixed) combination tap assembly, (chrome plated brass body) incorporating quarter turn ceramic disc headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C..

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2206336
Size:
Stainless steel braided PEX lined flexible hoses with 3/8” BSP (F) captive nut end connections
Marking:
Gessi on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2027
Model:
18622
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2206309

Wall mounted spout with a brass body (chrome plated). The spout outlet incorporates a TPE gasket. Maximum operating temperature 60°C.

Section:
0682
WRAS Approval Number:
2206309
Size:
½” BSP (M)
Marking:
Gessi on steel back plate
Installation Requirements:
R001 R040
Expiry date:
30/06/2027
Model:
20293
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2207318

Wall mounted shower body jet with brass body (chrome plated). The inlet incorporates a combined NBR and stainless steel filter, and an approved check valve cartridge with a flow regulator, however, the complete product has not been fully tested to demonstrate it provides backflow protection check valve on the inlet. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2207318
Size:
½” BSP (M).
Marking:
Gessi on wall plate.
Installation Requirements:
R001 R040
Expiry date:
31/07/2027
Model:
13375.
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2207321

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. The spout outlet incorporates a plastic aerator. The 58005 model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2207321
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Gessi on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2027
Model:
58005, 58006.
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2209332

Deck mounted flow control valves incorporating quarter turn ceramic disc headworks with single lever operating members, accompanied by a self-cancelling diverter with a dome type operating member diverting the flow between two outlets. The product is supplied with stainless steel braided silicone lined flexible connecting hoses and one outlet hose, as well as a further stainless steel braided PEX lined flexible outlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2209332
Size:
Stainless steel braided silicone lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Gessi on operating member
Installation Requirements:
R001 R007 R009 R010 R030 R040
Expiry date:
30/09/2027
Model:
58244
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 12 of 14

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.