TEST SITE

Comap UK Limited Approvals


#2004012

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headworks and single lever operating members. The outlet incorporates a plastic flow straighter or aerator and the product is supplied with a coin type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004012
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Francis Pegler (brand of Comap UK Ltd) on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
Ebro 4G4122

Approval Holder:
Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT

View All Listings by this Company
Manufacturer:
COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Print This Approval


#2004029

Deck mounted pillar tap (chromium plated brass), incorporating a ¼ turn ceramic disc headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with a metal backnut. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2004029
Size:
½” BSP (M)
Marking:
“Francis Pegler” (brand of Comap UK Ltd) on operating member
Installation Requirements:
R001 R006
Expiry date:
30/04/2025
Model:
Ebro 4G4120

Approval Holder:
Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT

View All Listings by this Company
Manufacturer:
COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Print This Approval


#2004048

Deck mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork and single lever operating member. The spout incorporates a plastic aerator or straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004048
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Francis Pegler on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
4S1205

Approval Holder:
Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT

View All Listings by this Company
Manufacturer:
COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Print This Approval


#2005006

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The products are supplied with metal backnuts and the spout outlets incorporate a plastic aerator or a plastic flow straightener (supplied with both). Maximum working pressure 5.0 Bar Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2005006
Size:
¾” BSP (M).
Marking:
Comap on rear of tap body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2025
Model:
922012 - Andreu Deck Bath Filler Tap

Approval Holder:
Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT

View All Listings by this Company
Manufacturer:
COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Print This Approval


#2005007

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005007
Size:
Stainless steel braided flexible hose assembly with ½” captive nut connection.
Marking:
Francis Pegler on operating member (Francis Pegler is a brand of Comap UK Ltd)
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2025
Model:
Ebro 4G4127

Approval Holder:
Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT

View All Listings by this Company
Manufacturer:
COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Print This Approval


#2004073

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headworks and single lever operating members. The outlet incorporates a plastic flow straighter or aerator and the product is supplied with a coin type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004073
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Francis Pegler (brand of Comap UK Ltd) on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
4K5013 – Ebro Mini Mono Basin

Approval Holder:
Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.