Range of shower hoses with PVC outer (various finishes) and TPE liner. Maximum operating temperature 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2006015

Size:

½” BSP captive nut

Marking:

Hansgrohe or AXOR (brand of Hansgrohe) on captive nut.

Installation Requirements:

R001

Expiry date:

30/06/2025

Model:

28 278 xxx Hansgrohe IsIflex. 30 330 818 Isi. 30 723 718 Isiflex'B. 28 272 xxx Hansgrohe IsIflex. 30 182 018 Isi. 30 331 218 Isi. 28 622 xxx AXOR. 28 277 xxx Hansgrohe IsIflex. 28 712 xxx HG Isiflex B. 30 331 518 Isi. 30 922 118 Isiflex'B. 28 276 xxx Hansgrohe IsIflex. 30 182 118 Isi. 30 321 518 AX Isiflex Special. 30 331 618 Isi TPE. 30 331 688 HG Isi. 31 182 118 Isi. 32 182 118 Isi. 34 182 118 Isi. 28 626 xxx AXOR. 28 275 xxx Isiflex`C. 28 713 xxx HG Isiflex B. 30 331 718 Isi. 30 923 518 Isiflex'B. 28 245 xxx Hansgrohe Isiflex. 30 213 018 Isi. 28 274 xxx Hansgrohe Isiflex. 28 714 xxx HG Isiflex B. 30 182 218 Isi. 30 332 018 Isi. 30 332 088 HG Isi. 30 922 218 Isiflex'B. 31 182 218 Isi. 28 624 xxx AXOR. 30 899 618 Isiflex. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Models ending 002 are hoses sold in blister packs. These are only available in chrome.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Two-hole, single outlet, (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator and the shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2012021

Size:

½” by ¾” BSP (M) Offset Unions.

Marking:

AXOR (brand of Hansgrohe) on body.

Installation Requirements:

R001 R030

Expiry date:

31/12/2025

Model:

10 411 xxx AXOR Starck Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted, flow control valves with brass bodies and various trim sets (various finishes). Flow is controlled to the outlets via a push to on push to off ‘detent’ headwork. Maximum Working Pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve with manual temperature control.

WRAS Approval Number:

2012028

Size:

For insertion into Hansgrohe I-box with ¾” BSP (F) inlet/outlet

Marking:

Hansgrohe or AXOR on backing plate.

Installation Requirements:

R001 R010 R040

Expiry date:

31/12/2025

Model:

Hansgrohe ShowerSelect Valve for concealed installation for 3 functions: 15 745 xxx 15 764 xxx 36 717 xxx AXOR - square 36 727 xxx AXOR - round 36 773 xxx AXOR - softcube Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/ or letters, as examples: 00 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Angled stop valve with a chrome plated brass body and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2101347

Size:

½” BSP (M).

Marking:

Hansgrohe on handle. HG and P797IA on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

13901000

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Models 10 102 xxx & 10 103 xxx are supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2101002

Size:

Stainless steel braided, PEX lined flexible hose assemblies with a 3/8" BSP captive nut.

Marking:

AXOR on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2026

Model:

AXOR Starck Single range: 10 001 xxx 10 003 xxx 10 007 xxx 10 102 xxx 10 103 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company