Shower handset with a plastic body in a variety of finishes (see model). The inlet incorporates a combined EPDM washer and stainless-steel strainer, and a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2110090

Size:

½” BSP (M).

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

28 561 XXX Hansgrohe Crometta hand shower mono green 6 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110094

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

AXOR (brand of Hansgrohe SE) on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2026

Model:

39024XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and waste set, 39023XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and pop-up waste set, 39022XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set, 39021XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set, 39151XXX - AXOR Citterio - Single lever basin mixer 280 with lever handle for wash bowls with waste set - rhombic cut, 39081XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and waste set - rhombic cut, 39071XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and pop-up waste set - rhombic cut, 39001XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set - rhombic cut. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted and overhead shower outlets, incorporating stainless steel strainers and flow regulators at the inlets. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2110309

Size:

½” BSP (F)

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

26 226 xxx HG 250 1jet headshower 26 227 xxx HG 250 1jet heedshower 9l 26 230 xxx HG 360 1jet headshower 26 228 xxx HG 250 1jet headshower ceiling 26 229 xxx HG 250 1jet headshower 9l celing 26 231 xxx HG 360 1jet headshower ceiling 26 232 xxx HG 250 3jet headshower wall 26 233 xxx HG 250 3jet headshower 9l wall 26 234 xxx HG 360 3jet headshower wall

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of shower handsets incorporating plastic bodies (various finishes), plastic flow regulators and stainless steel strainers. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2110352

Size:

½” BSP (M)

Marking:

Hansgrohe on face.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

26 864 xxx HG Rainfinity 250 3jet handshower 26 865 xxx HG Rainfinity 250 3jet handshower ecosmart 9L 26 866 xxx HG Rainfinity handshower 1jet 26 867 xxx HG Rainfinity handshower 1jet Ecosmart 9L Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples:000 = chrome optic finish, 700 = matte white optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Shower handset with a plastic body in a variety of finishes (see model). The inlet incorporates a combined EPDM washer and stainless-steel strainer, and a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2110091

Size:

½” BSP (M)

Marking:

AXOR (brand of Hansgrohe SE) on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

26 025 xxx AXOR Showers/Front Hand shower 85 1jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some products are supplied with a pop-up waste or a click type waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110027

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2026

Model:

Hansgrohe Talis S Single lever basin mixer 80 range: 72 010 xxx with pop-up waste set, 72 011 xxx with push-open (click type) waste set, 72 012 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 80 CoolStart range: 72 013 xxx with pop-up waste set, 72 014 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 80 LowFlow range: 72 015 xxx with pop-up waste set, 72 018 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 range: 72 020 xxx with pop-up waste set, 72 021 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 CoolStart range: 72 022 xxx with pop up waste set, 72 023 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 LowFlow 72 024 xxx with pop up waste set, 72 025 xxx without pop-up waste. Hansgrohe Talis S Single lever basin mixer 190 range: 72 031 xxx with pop-up waste, 72 032 xxx without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Shower kit consisting of a wall mounted elbow (brass body various finishes - see model), shower hose and handset. The outlet of the wall elbow incorporates a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset inlet incorporates a stainless-steel strainer and a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2201702

Size:

½” BSP (M)

Marking:

AXOR (brand of Hansgrohe SE) on body.

Installation Requirements:

R001 R040

Expiry date:

31/01/2027

Model:

12 626 xxx AXOR Starck Porter unit 120/120 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 36 100 xxx model is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110072

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections

Marking:

AXOR (brand of Hansgrohe SE) on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2026

Model:

36 100 xxx AXOR Citterio E Single lever basin mixer 130 with pop-up waste set. 36 101 xxx AXOR Citterio E Single lever basin mixer 130 with waste set. 36 102 xxx AXOR Citterio E Single lever basin mixer 90 for hand washbasins with waste set. 36 103 xxx AXOR Citterio E Single lever basin mixer 190 for wash bowls with waste set. 36 104 xxx AXOR Citterio E Single lever basin mixer 250 for wash bowls with waste set. 36 105 xxx AXOR Citterio E Pillar tap 90 without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted spout outlets, (brass bodies with various finishes) incorporating a plastic aerator. Maximum operating temperature: 60°C

Section:

0682

WRAS Approval Number:

2111011

Size:

½” BSP (M)

Marking:

Hansgrohe on mounting ring

Installation Requirements:

R001 R040

Expiry date:

30/11/2026

Model:

71 420 xxx HG Vernis Blend Bath spout chrome 71 460 xxx HG Vernis shape bath spout chrome Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet has a plastic aerator and model 31 531 XXX is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2111034

Size:

Stainless steel braided, PEX lined hoses assemblies incorporating 3/8" captive nut end connection.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2026

Model:

Hansgrohe Focus Single lever basin mixer 230 31 531 xxx 31 532 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company