Three-hole, single outlet (fixed) combination tap assembly, (chromium plated or PVD plated brass body). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever type pop-up waste and stainless steel braided PEX lined flex hose assemblies for connecting the spout and headworks. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2305011

Size:

Stainless steel braided, PEX lined flexible hose assemblies with 3/8” BSP captive nut end connections.

Marking:

Axor on spout

Installation Requirements:

R001 R006 R007 R009 R010

Expiry date:

31/05/2028

Model:

34 133 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of shower outlet elbows (brass bodies - various finishes) with a shower handset holder. The product incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure - 10 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2306705

Marking:

Axor on body

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

11 626 xxx – Axor ShowerSolutions Porter Unit SoftSquare 36 724 xxx – Axor Citterio E Porter Unit 120/120 SoftSquare Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of overhead shower outlets (brass bodies – various finishes). The inlets incorporate a plastic flow regulator. Model 26 221 xxx incorporates a stainless-steel strainer, all other models incorporate a plastic strainer. Maximum operating temperature 60.0°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2306706

Size:

½” BSP (M) inlet

Marking:

Hansgrohe logo on side or face of showerhead

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

26 220 xxx – Hansgrohe Croma Overhead Shower 280 1Jet 26 221 xxx – Hansgrohe Croma Overhead Shower 280 1Jet EcoSmart 9 L/min 27 474 xxx – Hansgrohe Raindance S Overhead Shower 240 1Jet with shower arm 27 477 xxx – Hansgrohe Raindance S Overhead Shower 240 1Jet with ceiling connector Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes). Incorporating a detent (push to open and push to close) ceramic cartridge headworks, and cube type operating members. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate stainless steel strainers and a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a click type pop up waste. Maximum working pressure 10.0 Bar.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305024

Size:

Stainless steel braided, PEX lined hose assemblies incorporating 3/8" BSP captive nut end connections

Marking:

Hansgrohe on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/05/2028

Model:

32 570 xxx 32 571 xxx 32 572 xxx xxx denotes the surface finish (which is a non-water contact part). examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of shower handsets with plastic bodies (various finishes). The inlets incorporate flow restrictors, model 24320xxx has a plastic strainer at the inlet, model 24321xxx has a stainless steel strainer at the inlet. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2305026

Size:

½” BSP male

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

24 320 xxx 24 321 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = Chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company