Range of ceramic cartridge headworks with plastic bodies, for insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0440 Headworks

Section Subtitle:

Headwork for installation into specifically dimensioned taps or shower valve bodies. Fittings listed in this section have undergone endurance and BS6920 testing in accordance with the requirements of the Regulators` Specification.

WRAS Approval Number:

2305005

Size:

M35 Ø

Marking:

Hansgrohe on body

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

30218400, M35S 30218410, M35EcoS 30218420, M35LS 30347500, M35XS 30347501, M35LXS 30347502, M35EcoXS

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Wall mounted, concealed, manually operated blending valve with a DZR brass body and chromium plated trim, incorporating a ceramic cartridge headwork and single lever operating member. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve with manual temperature control.

WRAS Approval Number:

2307700

Size:

½” BSP (F)

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2028

Model:

71 608 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), with a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305008

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections

Marking:

AXOR on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/05/2028

Model:

10 822 xxx Single lever kitchen mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet, fixed, combination tap assemblies (brass bodies - various finishes ) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Products are supplied either with or without a lever type pop-up waste set (see models). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305009

Size:

Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections (model 31 082 xxx) or Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections (all other models).

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/05/2028

Model:

31 080 xxx - Single lever basin mixer 110 with pop-up waste set 31 082 xxx - Single lever basin mixer 260 for washbowls with pop-up waste set 31 084 xxx - Single lever basin mixer 110 without waste set 31 203 xxx - Single lever basin mixer 110 LowFlow with pop-up waste set 31 204 xxx - Single lever basin mixer 110 LowFlow without waste set 31 121 xxx - Single lever basin mixer 110 CoolStart with pop-up waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating detent (push to open, push to close) type headworks controlling both temperature and flow with a dome operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a lever type pop up waste. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305010

Size:

Stainless steel braided (PEX) lined flexible hose assemblies incorporating 3/8” captive nut end connections.

Marking:

AXOR on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/05/2028

Model:

45 010 xxx 45 012 xxx 45 013 xxx 45 014 xxx 45 015 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company