Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated – brass bodies). Flow is controlled via a solenoid which is actuated via an infrared sensor and the temperature is controlled by a manual lever. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.

WRAS Approval Number:

2304069

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Axor on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

10 145 000 Axor Stark electronic basin mixer with temp pre adjustment with 230 V mains connection. 10 101 000 Axor Stark electronic basin mixer with temp control battery operated. 10 106 000 Axor Stark Electronic basin mixer with temp pre-adjustment battery-operated. 10 140 000 Axor Stark Electronic basin mixer with temp control with 230 V Mains connection. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of overhead shower and shower arm assemblies, (brass bodies - various finishes), incorporating a flow restrictor and stainless steel strainer on the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2304077

Size:

½” BSP (M)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

Shower Head – 24 330 xx0, 24 331 xx0, 24 333 xx0 Shower Arm – 24 337 xx0, 24 338 xx0, 24 339 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies -various finishes), incorporating ceramic cartridge headworks and single lever operating members. The Spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see list). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304315

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

Rebris S range: 72 510 xxx with pop-up waste set 72 513 xxx with pop-up waste set 72 514 xxx without waste set 72 517 xxx with pop-up waste set 72 519 xxx with pop-up waste set 72 520 xxx without waste set 72 527 xxx with metal pop-up waste set 72 580 xxx with pop-up waste set 72 582 xxx without waste set 72 584 xxx with metal pop-up waste set 72 586 xxx with pop-up waste set 72 588 xxx with pop up waste set 72 590 xxx with pop-up waste set Rebris E range: 72 550 xxx with pop-up waste set 72 551 xxx with metal pop-up waste set 72 553 xxx with pop-up waste set 72 554 xxx without waste set 72 557 xxx with pop-up waste set 72 559 xxx with pop-up waste set 72 560 xxx without waste set 72 581 xxx with pop-up waste set 72 583 xxx without waste set 72 585 xxx with metal pop-up waste set 72 587 xxx with pop-up waste set 72 589 xxx with pop up waste set 72 591 xxx with pop-up waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. temperature 65.0°C

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2303030

Size:

1/2" BSP (F)

Marking:

AXOR on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2028

Model:

39171XXX – AXOR Citterio 39181XXX – AXOR Citterio 39119XXX – AXOR Citterio 39121XXX – AXOR Citterio

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products are supplied with a click type pop-up waste. Maximum working pressure 10.0 Bar Maximum operating temperature 60°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304007

Size:

Stainless steel braided, PEX lined hose incorporating 3/8" BSP captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

32 502 xx0 32 503 xx0 32 507 xx0 32 508 xx0 74 502 xx0 74 507 xx0

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company