TEST SITE

Hansgrohe SE Approvals


#2312302

Range of three hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with lever type operating members. The spout outlet incorporates a plastic aerator. This products are supplied with a click-type pop up waste. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2312302
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Hansgrohe on body
Installation Requirements:
R001 R006 R007 R010
Expiry date:
31/12/2028
Model:
73030xx0 73330xx0

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2312005

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes), incorporating two detent headworks. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating manual override button. The spout outlet incorporates a plastic aerator. The inlets incorporate approved single check valve cartridges with strainers, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0540 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and shower outlet.
WRAS Approval Number:
2312005
Size:
½” BSP (M)
Marking:
Axor on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2028
Model:
45 420 xx0 45 421 xx0

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2312006

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator. Product is to be installed with 13 622 180 rough inset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2312006
Size:
1/2" BSP (F) inlets.
Marking:
Marking: Hansgrohe on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2028
Model:
31 085 XX0 31 086 XX0 31 251 XX0

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2307043

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with or without a pop-up waste (see model), Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2307043
Size:
71 443 xxx model: Stainless steel braided thermoplastic silicone rubber (TPSiV) lined flexible hose assemblies incorporating ⅜” captive nut end connections. All other models: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2028
Model:
71 581 xxx Vernis Blend Single lever basin mixer 190 with metal pop-up waste set, 71 582 xxx Vernis Blend Single lever basin mixer 190 without waste set, 71 562 xxx Vernis Shape Single lever basin mixer 190 with pop-up waste set, 71 590 xxx Vernis Shape Single lever basin mixer 190 with metal pop-up waste set, 71 591 xxx Vernis Shape Single lever basin mixer 190 without waste set, 71 552 xxx Vernis Blend Single lever basin mixer 190 with pop-up waste set, 71 443 xxx Vernis Blend Single lever bath mixer Monotrou. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2401711

Range of concealed, wall mounted rough sets with DZR brass bodies. Maximum working pressure 10.0 Bar. Maximum operating temperature 75.0°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2401711
Size:
1/2" BSP (F).
Marking:
Hansgrohe (13 622 180) or AXOR (13 623 180) on body.
Installation Requirements:
R001 R010
Expiry date:
31/01/2029
Model:
13 622 180, 13 623 180.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2312322

Range of single hole, single outlet (swivel nozzle) tap (chrome plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0410 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap with a single outlet swivel spout with swivel nozzle.
WRAS Approval Number:
2312322
Size:
Stainless steel braided PEX lined hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Hansgrohe SE on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2028
Model:
73200xx0 73201xx0

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 32 of 32

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.