Range of thermostatic cartridges with plastic bodies and EPDM ‘O’-rings. All models incorporate a plastic strainer. For insertion into specifically dimensioned bores. Maximum working pressure 16 bar. Maximum operating temperature 60°C.

Section:

0442 Thermostatic cartridges

Section Subtitle:

Thermostatic cartridges for installation into specifically dimensioned tap or shower valve bodies.

WRAS Approval Number:

2206038

Size:

Please refer to model.

Marking:

Hansgrohe on body (3/4” BSP male models are marked underneath the nut on the body)

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

30 122 090 - OD 30mm 31 122 020 - ¾” BSP male 31 122 030 - ¾” BSP male 31 122 040 - OD 30mm 31 122 050 - ¾” BSP male 31 122 060 - ¾” BSP male 31 122 070 - ¾” BSP male 31 122 080 - ¾” BSP male

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of shower handsets (various finishes) incorporating stainless steel strainers. Model 28 588 xxx incorporates flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2207710

Size:

Stainless steel braided thermoplastic silicone rubber lined flexible hose assembly incorporating 3/8” BSP captive nut end connection.

Marking:

Hansgrohe on front base of shower handset.

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

28 587 xxx- Hansgrohe Raindance Select S Hand shower 150 3jet 28 588 xxx- Hansgrohe Raindance Select S Hand shower 150 3jet EcoSmart 9 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2205362

Size:

Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

Axor (brand of Hansgrohe SE) on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/05/2027

Model:

AXOR One 48 010 xxx, 48 020 xxx & 48 030 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of floor and wall mounted two-hole, single outlet fixed combination taps assemblies (various finishes) incorporating quarter turn ceramic disc headworks and manual diverter to shower outlet with either single lever operating members on model 16 553 XX0 or cross top on models 16 540 XX0/16 547 XX0. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate plastic aerators and the products are supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

2207052

Size:

Models 16 547 XX0/ 16 553 XX0 to be used with 16 549 180 which has 1/2" BSP (F) inlets Models 16 540 XX0/ 1/2" BSP (M) x 3/4" BSP (M) offset union

Marking:

AXOR on spout

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

16 547 xx0 Axor Montreux 2-handle bath mixer floor-standing 16 553 xx0 Axor Montreux 2-handle bath mixer floor-standing with lever handles 16 540 xx0 Axor Montreux 2-handle bath mixer for exposed installation with cross handles 16 549 180 Axor Montreux Basic set for 2-handle bath mixer floor-standing Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Two hole, single outlet (swivel) combination tap assembly (brass body - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout is supplied with a stainless steel braided PEX lined flexible hose assembly and a brass connecting nipple for installation onto a quick connect polyamide braided PE lined flexible hose assembly from the headwork. The quick connect hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2207057

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Axor (brand of Hansgrohe SE) on base of spout.

Installation Requirements:

R001 R006 R007 R009 R010

Expiry date:

31/07/2027

Model:

34 820 XXX Axor Citterio M 2-hole single lever kitchen mixer. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company