TEST SITE

Hansgrohe SE Approvals


#2205072

Wall mounted spout outlet (brass body, various finishes - see model) incorporating a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0682
Size:
¾” BSP (M).
Marking:
Hansgrohe on wall plate.
Installation Requirements:
R001 R040
Expiry date:
31/05/2027
Model:
72 410 xxx Hansgrohe Talis S Bath spout. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2207709

Range of overhead shower outlets with brass bodies (various finishes - see model). Model 27 390 xxx is ceiling mounted. Model 27 437 xxx is wall mounted. The inlet incorporates stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2207709
Size:
½” BSP (M)
Marking:
27 390 xxx model: Hansgrohe on shower head body. 27 437 xxx model: Hansgrohe on rosette.
Installation Requirements:
R001 R040
Expiry date:
31/07/2027
Model:
27 390 xxx Hansgrohe PuraVida (Overhead shower 400 1jet with ceiling connector), 27 437 xxx Hansgrohe PuraVida (Overhead shower 400 1jet with shower arm). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2206035

Range of wall mounted, concealed, manual blending shower valves with brass bodies and trim set (various finishes). The flow is controlled independently to one or two separate outlets via ‘detent’ (push to on push to off) headworks (see model). Temperature is controlled via a ceramic cartridge. The inlets incorporate single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve with manual temperature control.
WRAS Approval Number:
2206035
Size:
15mm ØD flat faced connection.
Marking:
Hansgrohe on face plate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2027
Model:
15 747 xxx Hansgrohe ShowerSelect S Mixer for concealed installation for 1 function, 15 748 xxx Hansgrohe ShowerSelect S Mixer for concealed installation for 2 functions, 15 767 xxx Hansgrohe ShowerSelect Mixer for concealed installation for 1 function, 15 768 xxx Hansgrohe ShowerSelect Mixer for concealed installation for 2 functions. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2206355

Wall mounted manual blending shower valve with a brass body (various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve with manual temperature control.
WRAS Approval Number:
2206355
Size:
⅜” x ½” offset union.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2027
Model:
71602xxx HG Logis E shower mixer exposed. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2206036

Range of wall mounted two-hole, single outlet (fixed), combination tap assemblies incorporating brass bodies (various finishes), ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2206036
Size:
1/2" x 3/4" BSP (M) offset union
Marking:
HANSGROHE on Operating Member
Installation Requirements:
R001 R030
Expiry date:
30/06/2027
Model:
13 040 xxx Hansgrohe Picta Single lever bath mixer for exposed installation 14 403 xxx Hansgrohe Sanibel Single lever bath mixer for exposed installation 31 480 xxx Hansgrohe Metris Single lever bath mixer for exposed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 24 of 64

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.