TEST SITE

Hansgrohe SE Approvals


#2205074

Range of shower heads with or without wall connectors (see models) with plastic bodies (various finishes). The shower heads incorporate a stainless steel strainer and plastic flow regulator on the inlet. Model added September 2023: Wall mounted, brass shower arm (various finishes - see model).

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2205074
Size:
24 140 xxx: ½” BSP (F). 24 150 xxx: N/A (can only be used with compatible Hansgrohe products). Model added August 2023: 24 357 xx0: ½” BSP (M) Models added November 2023: 24 141 xxx: ½” BSP (F). 24 151 xxx: N/A (can only be used with compatible Hansgrohe products).
Marking:
Hansgrohe on shower face
Installation Requirements:
R001 R040
Expiry date:
31/05/2027
Model:
24 140 xxx Hansgrohe Pulsify S Overhead shower 260 1jet 24 150 xxx Hansgrohe Pulsify S Overhead shower 260 2jet with wall connector Model added September 2023: 24 357 xx0 Hansgrohe Shower arm S 39 cm (which must be installed in conjunction with the 24 140 xxx model or 24 141 xx0 model added November 2023) Models added November 2023: 24 141 xx0 Hansgrohe Pulsify S Overhead shower 260 1jet EcoSmart 24 151 xx0 Hansgrohe Pulsify S Overhead shower 260 2jet EcoSmart with wall connector Where xxx or xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2205075

Range of overhead shower outlets with brass and plastic bodies, various finishes (see models). The inlets incorporate stainless-steel filters and plastic flow regulators. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2205075
Size:
½” BSP male
Marking:
Hansgrohe of rim of shower head
Installation Requirements:
R001 R040
Expiry date:
31/05/2027
Model:
27 461 XXX 27 463 XXX 27 464 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2204080

Deck mounted two-hole, single outlet, fixed combination tap assembly (brass body, various finishes - see model), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts and an optional stainless steel mesh washer for installation in the spout outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2204080
Size:
¾” BSP (M)
Marking:
Hansgrohe on front base of tap.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
71452 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2204082

Range of wall mounted two hole, single outlet (fixed) combination tap assemblies. The product comprises of a trim set (various finishes - see model) and a concealed brass body. The trim set includes a ceramic cartridge headwork with a single lever operating member, headwork collar and a brass spout for installation into the concealed body. The spout outlet incorporates a plastic aerator, as well as a plastic strainer and plastic flow regulator on its inlet. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2204082
Size:
½” BSP (M) inlets (to basic set - concealed body).
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2027
Model:
71 576 xxx HG Vernis Blend 2-hole basin mixer, 71 578 xxx HG Vernis Shape 2-hole basin mixer. Both of which must be installed in conjunction with: 13622180 (Basic set - concealed body). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2204081

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The outlet from the self-cancelling diverter incorporates an approved check valve cartridge, Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2204081
Size:
Stainless steel braided thermoplastic silicone (TPSiV) lined flexible hose assemblies with ⅜" captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2027
Model:
71 444 xxx single lever bath and shower mixer Monotrou, 71 463 xxx single lever bath and shower mixer Monotrou. Where xx denotes the surface finish (which is non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 23 of 64

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.