TEST SITE

Hansgrohe SE Approvals

#2205040

A range of wall mounted two-hole single outlet fixed combination tap assemblies with brass bodies and various finishes (see models). Incorporating a combined shut-off and manual diverter cartridge which diverts between the bath or shower outlet with various operating members (see models). The temperature is controlled independently via a thermostatic cartridge with a manual override button with dome type or single lever type operating members (See models). Both inlets incorporate stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar, Maximum working temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2205040
Size:
¾” BSP male x ½” BSP male offset unions.
Marking:
34 435 xxx, 36 140 xxx- AXOR on top of tap 13 123 xxx, 13 154 xxx,15 348 xxx & 13 201 xx0 - Hansgrohe on top of tap.
Installation Requirements:
R001 R020 R040
Expiry date:
31/05/2027
Model:
13 123 xxx- Shut-off/diverter cartridge and thermostatic cartridge both with dome type operating members. 13 154 xxx- Shut-off/diverter cartridge and thermostatic cartridge both with single lever operating members. 34 435 xxx- Shut-off/diverter cartridge and thermostatic cartridge both with dome type operating members. 36 140 xxx- Shut-off/diverter cartridge has a cross top operating member thermostatic cartridge has a dome type operating member. 15 348 xxx- Shut-off/diverter cartridge and thermostatic cartridge both with single lever operating members. Model added October 2023: 13 201 xx0 - Shut-off/diverter cartridge and thermostatic cartridge both with dome type operating members. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval

#2205047

Range of shower handsets with plastic bodies (various finishes) incorporating stainless steel strainers on the inlets and flow regulators (on models 26 827 XXX and 26 829 XXX). Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2205047
Size:
½” BSP (M)
Marking:
Hansgrohe and product info on shower handle
Installation Requirements:
R001 R040
Expiry date:
31/05/2027
Model:
26 823 xxx Hansgrohe Crometta 100 Hand shower Multi 26 824 xxx Hansgrohe Crometta 100 Hand shower Vario 26 825 xxx Hansgrohe Crometta 100 Hand shower 1jet 26 826 xxx Hansgrohe Crometta 100 Hand shower Multi EcoSmart 9 l/min 26 827 xxx Hansgrohe Crometta 100 Hand shower Vario EcoSmart 9 l/min 26 828 xxx Hansgrohe Crometta 100 Hand shower 1jet EcoSmart 9 l/min 26 829 xxx Hansgrohe Crometta 100 Hand shower 1jet EcoSmart 7 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval

#2205048

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a push on/off headwork with rotary temperature control using dome type lever operating member. Both inlets incorporate stainless steel strainers an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Some models are supplied with lever type pop up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2205048
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections
Marking:
Hansgrohe on front of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2027
Model:
Models with a waste set: 71 750 xxx Hansgrohe Talis Select E Basin mixer 110 71 752 xxx Hansgrohe Talis Select E Basin mixer 240 72 040 xxx Hansgrohe Talis Select S Basin mixer 80 72 042 xxx Hansgrohe Talis Select S Basin mixer 100 72 044 xxx Hansgrohe Talis Select S Basin mixer 190 Models without a waste set: 72 041 xxx Hansgrohe Talis Select S Basin mixer 80 72 043 xxx Hansgrohe Talis Select S Basin mixer 100 72 045 xxx Hansgrohe Talis Select S Basin mixer 190 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval

#2205049

Wall mounted, manual blending valve (brass body, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve with manual temperature control.
WRAS Approval Number:
2205049
Size:
½" x ¾" offset unions.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2027
Model:
31 680 xxx Hansgrohe Metris Single lever shower mixer for exposed installation. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval

#2205050

Wall mounted two-hole, single outlet (fixed) combination tap assemblies, brass bodies with various finishes (see model) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2205050
Size:
½”- ¾” BSP (M) Offset Union
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R010 R030
Expiry date:
31/05/2027
Model:
31 940 xxx Hansgrohe Focus - Single lever bath mixer for exposed installation. Model added August 2023: 31 954 xxx - Hansgrohe Waterforms - Single lever bath mixer for exposed installation. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 21 of 64

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.