TEST SITE

Hansgrohe SE Approvals


#2006046

Range of overhead wall mounted shower outlets with brass bodies (various finishes), incorporating a plastic aerator and stainless-steel strainers on two of the three inlets to the main body. The 35 283 xxx models also incorporate plastic flow regulators on all three of the inlets to the main body. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2006046
Size:
¾” BSP (F)
Marking:
Hansgrohe on spray plate. AXOR on spray plate (model 35 283 xxx)
Installation Requirements:
R001 R040
Expiry date:
30/06/2025
Model:
24 001 400 Hansgrohe Rainmaker Select 580 3jet overhead shower (white/chrome). 24 001 600 Hansgrohe Rainmaker Select 580 3jet overhead shower (black/chrome). 24 011 400 Hansgrohe Rainmaker Select 580 3jet overhead shower Ecosmart 9 l/min (white/chrome). 35 283 xxx AXOR ShowerSolutions Overhead shower 250/580 3jet. All the above items are for use in conjunction with the iBox 01800180 rough-in (concealed) set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2009001

Range of wall mounted concealed manual blending valves with a DZR brass body incorporating a ceramic cartridge headwork with a single lever operating member, fitting is available with trim set (available in various finishes). Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve with manual temperature control.
WRAS Approval Number:
2009001
Size:
½” BSP (F)
Marking:
Hansgrohe on top of operating member. DR on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2025
Model:
31 686 xxx HG Metris 31 967 xxx HG Focus 71 606 xxx HG Logis 31 966 xxx HG Focus To be used with basic set 13 620 180 “xxx” denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and letters examples: 000= Chrome optic finish, 800= PVD Stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2009002

Wall mounted two hole, single outlet (swivel) combination tap assembly with DZR brass bodies (various finishes). Incorporating a ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2009002
Size:
½” BSP (F)
Marking:
Axor (brand name of Hansgrohe) on spout
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2025
Model:
34 112 xxx AXOR Citterio M (167mm and plate) 34 113 xxx AXOR Citterio M (167mm and escutcheons) 34 115 xxx AXOR Citterio M (227mm and plate) 34 116 xxx AXOR Citterio M (227mm and escutcheons) Where xxx denote the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letter, as examples; 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2009003

Range of overhead shower outlet and arm with chrome plated brass body. The inlet in model 27 375 000 incorporates a plastic flow regulator and stainless steel strainer. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2009003
Size:
½” BSP (male)
Marking:
Hansgrohe on front of overhead shower face.
Installation Requirements:
R001 R040
Expiry date:
30/09/2025
Model:
27 370 xxx Hansgrohe Raindance E Overhead shower 240 1jet with shower arm 27 371 xxx Hansgrohe Raindance E Overhead shower 360 1jet with shower arm 24 cm 27 375 xxx Hansgrohe Raindance E Overhead shower 240 1jet EcoSmart 9 l/min with shower arm 27 376 xxx Hansgrohe Raindance E Overhead shower 360 1jet with shower arm 39 cm 27 381 xxx hansgrohe Raindance E Overhead shower 360 1jet with ceiling connector Where xxx denote the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letter, as examples; 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2009007

Range of exposed wall mounted two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a two-way manual diverter controlling and diverting the flow between the spout outlet and an overhead shower (not supplied) and a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. The inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2009007
Size:
½” BSP (M)
Marking:
Hansgrohe on front of body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2025
Model:
13 107 xxx Hansgrohe ShowerTablet 350 Exposed Thermostatic Bath Mixer 13 109 xxx Hansgrohe ShowerTablet 600 Exposed Thermostatic Bath Mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 3 of 64

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.