Wall mounted, exposed, manual shower blending valve with a brass body (various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The product also incorporates a self-cancelling diverter valve which diverts the flow between an overhead shower or shower handset. The product is supplied with a shower hose, handset, overhead shower and a shower rail. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve with manual temperature control.

WRAS Approval Number:

2301075

Size:

¾" x ½" offset unions.

Marking:

Hansgrohe on body, shower handset and overhead shower.

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2028

Model:

27 266 xxx Hansgrohe Crometta Showerpipe 160 1jet with single lever mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted, three-hole single outlet (fixed) bath and shower mixers with brass bodies (various finishes - see model), incorporating quarter turn ceramic disc headworks with cross top operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose and handset. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0655 Combination Tap Assemblies

Section Subtitle:

Three hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2301076

Size:

½” BSP (F) (to basic set)

Marking:

AXOR on spout and shower handset.

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2028

Model:

10 303 180 Basic set for 3-hole wall mixer for concealed installation, which must be installed in conjunction with the following models: 39 441 xxx Axor Citterio 3-hole bath and shower mixer with cross handles and plate, 39 447 xxx Axor Citterio 3-hole bath and shower mixer with cross handles. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Overhead shower outlet (brass body, various finishes) with an EPDM `O`-ring and a stainless-steel filter. The shower head incorporates a flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2303032

Size:

½” BSP (F)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Expiry date:

31/03/2028

Model:

27450 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000= Chrome optic finish, 800= PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Supplied with lever type pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature (See models)

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2303036

Size:

Stainless steel braided, PEX lined flexible hose assemblies with 3/8" BSP (F) captive nut end connections

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R010 R006 R009

Expiry date:

31/03/2028

Model:

31060XXX with pop-up waste set (60°C) 31063XXX with pop-up waste set (60°C) 31068XXX without waste set (70°C) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Three-hole, single outlet, fixed combination tap assembly with chromium plated brass body. Incorporating a quarter turn ceramic disc headwork with single lever operating member.The spout outlet incorporates a plastic aerator. The product is supplied with copper tube for installation between the headworks and spout. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2303037

Size:

½” BSP (M)

Marking:

Hansgrohe on spout

Installation Requirements:

R001 R006 R010

Expiry date:

31/03/2028

Model:

71 747 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of three hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes) incorporating quarter turn ceramic disc headworks with single lever or dome type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with copper tube for installation between the headworks and spout. Maximum working pressure 10 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2303039

Size:

½” BSP male

Marking:

Hansgrohe on spout

Installation Requirements:

R001 R010 R006

Expiry date:

31/03/2028

Model:

32 313 xxx 71 300 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Three-hole, single outlet (fixed), combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating members and self-cancelling diverter to shower outlet. The product is supplied with a shower hose and handset. The shower hose inlet incorporates an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0655 Combination Tap Assemblies

Section Subtitle:

Three hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2303055

Size:

For use with 13 437 180 basic set which has a ½” BSP (M) inlet

Marking:

HANSGROHE on spout and operating member

Installation Requirements:

R001 R006 R030

Expiry date:

31/03/2028

Model:

71 310 xxx Hansgrohe Logis 3-hole bath mixer with 13 437 180 Hansgrohe Basic set for 3-hole rim-mounted bath mixer available in -000 Chrome

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2303059

Size:

Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with 3/8” captive nut end connections

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/03/2028

Model:

71 311 xxx Hansgrohe Logis Single Lever Bath Mixer Monotrou 72 434 xxx Hansgrohe Rebris S Single Lever Bath Mixer Monotrou 72 435 xxx Hansgrohe Rebris E Single Lever Bath Mixer Monotrou Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass body, various finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2303060

Size:

For use with rough in set 13 622 180 which is not part of this approval.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2028

Model:

32525xx0 32526xx0 74525xx0 74526xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (Various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2303069

Size:

For use with basic set 13244180 which has ½” BSP (M) inlets

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R040

Expiry date:

31/03/2028

Model:

72 110 XXX 72111 XXX Where XXX denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000= Chrome optic finish, 800= PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company