Single inlet, flow control valve with a brass body, incorporating a ‘detent’ (push to on push to off) headwork controlling the flow. The product is supplied with a trim sets in various finishes (see model) Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2170 Valves

Section Subtitle:

Flow control, manually operated.

WRAS Approval Number:

2201038

Size:

½” BSP (F) inlet x ¾” BSP (F) outlet

Marking:

AXOR on wall plate

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2027

Model:

45 771 xxx AXOR One Shut-off valve for use in conjunction with 45 770 180 AXOR One Basic set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The products can be supplied with a pop-up or click type waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2201041

Size:

Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2027

Model:

71 710 xxx Hansgrohe Talis E Single lever basin mixer 110 with pop-up waste set. 71 713 xxx Hansgrohe Talis E Single lever basin mixer 110 CoolStart with pop-up waste set. 71 715 xxx Hansgrohe Talis E Single lever basin mixer 110 LowFlow with pop-up waste set. 71 716 xxx Hansgrohe Talis E Single lever basin mixer 240 with pop-up waste set. 71 711 xxx Hansgrohe Talis E Single lever basin mixer 110 with push-open waste set. 71 712 xxx Hansgrohe Talis E Single lever basin mixer 110 without waste set. 71 714 xxx Hansgrohe Talis E Single lever basin mixer 110 CoolStart without waste set. 71 717 xxx Hansgrohe Talis E Single lever basin mixer 240 without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (brass body, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2205704

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections.

Marking:

Hansgrohe on base of body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/05/2027

Model:

72 810 XXX Hansgrohe Talis M51 Single lever kitchen mixer 260, 1 jet. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manual click type cartridge headwork with plastic body. EPDM seals and plastic strainer for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.

Section:

0440 Headworks

Section Subtitle:

Headwork for installation into specifically dimensioned taps or shower valve bodies. Fittings listed in this section have undergone endurance and BS6920 testing in accordance with the requirements of the Regulators` Specification.

WRAS Approval Number:

2201310

Size:

18.98mm Ø

Marking:

Hansgrohe, date of manufacture (WW/YY) AuK Muller ID code & QR code on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

50.005.800 (30148500)

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Phone

+49 211 7391 0

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The products can be supplied with waste outlets (see models). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2201035

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive end connections.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2027

Model:

14 042 xxx Hansgrohe Ecos Single lever basin mixer M CoolStart without waste set 31 539 xxx Hansgrohe Focus Single lever basin mixer 70 CoolStart with pop-up waste set 14 080 xxx Hansgrohe Ecos Single lever basin mixer M with pop-up waste set 31 910 xxx Hansgrohe Focus Single lever basin mixer 70 with extra long handle and pop-up waste set 31 914 xxx Hansgrohe Focus Single lever basin mixer 70 with extra long handle without waste set 31 604 xxx Hansgrohe Focus Single lever basin mixer 70 with push-open waste set 31 730 xxx Hansgrohe Focus Single lever basin mixer 70 with pop-up waste set 31 732 xxx Hansgrohe Focus Single lever basin mixer 70 with chain 31 733 xxx Hansgrohe Focus Single lever basin mixer 70 without waste set 31 951 xxx Hansgrohe Focus Single lever basin mixer 70 LowFlow with pop-up waste set 31 952 xxx Hansgrohe Focus Single lever basin mixer 70 LowFlow without waste set Model added August 2023: 31 559 xxx Waterforms Single lever basin mixer M CoolStart with push-open waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company