Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headworks with single lever operating member. The spout outlet incorporates a plastic aerator. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004326

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

SMR Logo on rear of operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2025

Model:

HILTON

Approval Holder:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The inlets incorporate a combined TPE washer and stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004325

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

SMR Logo on rear of body

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2025

Model:

AD4

Approval Holder:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007346

Size:

Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections.

Marking:

SMR logo on rear of body

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2025

Model:

TM1

Product Images

Approval Holder:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010360

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” (M) end connection.

Marking:

SMR on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

Cubic Quadrant Single Lever New Media ACT2087

Product Images

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road

Postcode

S75 1HT

Phone

01226 283434

General Email

pillingworth@abodedesigns.co.uk

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

General Email

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies with (chrome plated) brass bodies. Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a aerator. Inlets incorporate single check valve cartridge (however the the complete assembly has not been tested to demonstrate it provides adequate backflow protection)Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109330

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” BSP (M) end connections.

Marking:

SMR on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2026

Model:

HYDRUS, MODENA, CLYNE, AQUAREACH, 840MINIMALIST TOP LEVER

Product Images

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road

Postcode

S75 1HT

Phone

01226 283434

General Email

pillingworth@abodedesigns.co.uk

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

General Email

View All Listings by this Company