Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with a single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2204305

Size:

15mm copper tail (DM2 model) Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections (DM1 model)

Marking:

SMR on body

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2027

Model:

DM1 DM2

Product Images

Approval Holder:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

View All Listings by this Company

Range of single hole, double outlet (swivel) combination tap assemblies with brass bodies (chrome plated), incorporating quarter turn ceramic disk headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a double outlet and a swivel spout.

WRAS Approval Number:

2206323

Size:

Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

SMR on rear of body

Installation Requirements:

R001 R006

Expiry date:

30/06/2027

Model:

ACT3024 & HF1009

Product Images

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road

Postcode

S75 1HT

Phone

01226 283434

General Email

pillingworth@abodedesigns.co.uk

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

General Email

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlets incorporate a plastic aerator. The inlet hose incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2206350

Size:

Stainless steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

SMR on the underside of operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2027

Model:

ACT2096 & ACT3012

Product Images

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road

Postcode

S75 1HT

Phone

01226 283434

General Email

pillingworth@abodedesigns.co.uk

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

General Email

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies, (chrome plated brass bodies), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304328

Size:

Stainless steel braided EPDM lined flexible hoses with ½”BSP (M) end connection.

Marking:

SMR on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2028

Model:

ALTHIA SINGLE LEVER SWAN, ALTHIA SINGLE LEVER QUAD, GLOBE SINGLE LEVER.

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road

Postcode

S75 1HT

Phone

01226 283434

General Email

pillingworth@abodedesigns.co.uk

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

General Email

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309329

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections

Marking:

SMR etched on rear of body

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2028

Model:

TM1 SF SWAN TM1 SF QUAD

Approval Holder:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

View All Listings by this Company