Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet is a pull-out spray type. The spout inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow prevention. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2211057

Size:

PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP captive nut

Marking:

Cooke & Lewis & date of manufacture MM/YY on body

Installation Requirements:

R001 R009 R090

Expiry date:

30/11/2027

Model:

3663602929956, 3663602929963 & 5059340504360 (stainless steel Brushed)

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square, Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Range of single hole, two single outlets (swivel) combination tap assemblies (brass bodies - various finishes). Incorporating ceramic cartridge headwork, single lever operating member controlling both flow and temperature to the spout and spring-loaded pull-down hose. The pull-down hose incorporates a hand spray with a self-closing trigger mechanism. The spout incorporates a ceramic disc headwork controlling the flow with a single lever operating member. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2211058

Size:

PEX lined flexible hose assemblies with stainless steel braiding with 1/2" B captive nut.

Marking:

Cooke & Lewis &date of manufacture MM/YYYY on body

Installation Requirements:

R001 R009 R010 R006

Expiry date:

30/11/2027

Model:

3663602930075 Chrome 3663602930082 Nickle Brushed 3663602930099 Black Paint

Product Images

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square, Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass body, chrome or black finish) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a spring-loaded pull-down hose incorporating a spray handset with trigger mechanism that controls the spray. The spray handset incorporates a plastic aerator at the outlet. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2211059

Size:

PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP captive nut end connections.

Marking:

Cooke & Lewis & date of manufacture MM/YYYYY on body

Installation Requirements:

R001 R009 R010 R006

Expiry date:

30/11/2027

Model:

3663602930068 Chrome 3663602930273 Black

Product Images

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square, Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Range of single hole, single outlet (swivel), combination tap assemblies (brass bodies with various finishes), incorporating ceramic cartridge or quarter turn ceramic disc headworks with single lever, cross-top or dome operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 or 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2301083

Size:

Stainless steel braided PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.

Marking:

Cooke & Lewis & date of manufacture MM/YYYY on tap body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2028

Model:

3663602929840, 3663602929857, 3663602929864, 3663602930310, 3663602930457, 3663602929932, 3663602930112, 3663602930129, 3663602930655, 3663602930303, 3663602930624, 3663602930594, 3663602929994, 3663602930006, 3663602930013, 3663602930358 & 3663602930037

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square, Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout is a pull-down hose and handset with an optional spray function. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2211060

Size:

PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP (F) captive nut end connection.

Marking:

Cooke & Lewis & Date of manufacture MM/YYYY on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2027

Model:

3663602930662

Product Images

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square, Paddington, London

Postcode

W2 6PX

View All Listings by this Company