Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies with stainless steel bodies (in various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The solenoid housing attaches to the main tap body via (black) LLDPE tubing. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2203315

Size:

½” BSP (M)

Marking:

Dolphin logo on body.

Installation Requirements:

R001 R006 R008 R010 R557 R570

Expiry date:

31/03/2027

Model:

DSaaa.bbb.ccc.d.ee – DS220 Series InForm SMART taps. Where ‘aaa’ denotes the mounting type, the following options are available: DS221 – straight spout DS223 – bent spout Where ‘bbb’ denotes the projection of the spout from body to spout outlet in mm. Range 95mm - 195mm in 25mm increments. Where ‘ccc’ denotes the height of the tap from the underside of the rosette to the top of the body in mm. Range 170mm – 370mm including 170mm, 260mm, 310mm & 370mm. Where ‘d’ denotes the material finish, the following options are available: .1 – brushed/satin, .2 - mirror polished, .3 - PVD on brushed/satin, .4 - PVD on mirror polished or .5 – powder coated (PC). Where ‘ee’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.

Product Images

Approval Holder:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company

Manufacturer:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

2111381

Size:

½” BSP (M)

Marking:

Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern

Installation Requirements:

R001 R556

Expiry date:

30/11/2026

Model:

DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

2112363

Size:

½” BSP (M)

Marking:

Dolphin logo on adhesive label below insert within cistern: 6L waterline on casing within cistern Dolphin logo on flush plate

Installation Requirements:

R001 R556 R571

Expiry date:

31/12/2026

Model:

DB552x.M, DB552x.M, DB552x.M, DB552x.M.1130, DB552x.P.1130 & DB552x.C.1130 concealed WC flushing cisterns ‘x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company

Range of wall mounted mirrored units incorporating an electronically controlled combination tap assemblies. Flow is controlled via solenoid valve which is actuated by an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.

WRAS Approval Number:

2206354

Size:

½” BSP (M).

Marking:

Dolphin Solutions Ltd. logo (letter D with integral dolphin silhouette) on underside of mounting bracket. Products with the Alavo behind mirror baseplate mounting option are marked Dolphinsolutions.co.uk on the underside of the base plate.

Installation Requirements:

R001 R007 R008 R040 R570

Expiry date:

30/06/2027

Model:

DS191.xx - Dolphin Alavo behind mirror inform (SMART) tap. Where xx denotes the size and shape of the mounting bracket and can be any combination of letters and/or numbers.

Product Images

Approval Holder:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company

Manufacturer:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass finish). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator and a stainless-steel strainer on the inlet. Maximum working pressure 8.0 Bar Maximum operating temperature 70.0°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.

WRAS Approval Number:

2209054

Size:

Stainless steel braided polyethylene lined flexible hose with 3/8" BSP captive nut end connections

Marking:

Dolphin on tap body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2027

Model:

DB200-aa-bb,DB225-aa-bb, DB200- SSL-aa-bb, DB225-SSL-aa-bb, DBL200-aa-bb & DBL225-aa-bb COMBINATION TAP ASSEMBLIES

Approval Holder:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

View All Listings by this Company