TEST SITE

Dornbracht AG & Co. KG Approvals


#2111040

Range of single hole single outlet fixed combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The product incorporates a plastic flow regulator in the spout body, and a plastic aerator in the spout outlet. Certain models are supplied with click type waste (See models). Maximum working pressure 10 bar. Maximum working temperature 60 °C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2111040
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nuts.
Marking:
Dornbracht on front of spout
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2026
Model:
33500811- Click waste 33505811- Click waste 33521811- Without click waste 33525811- Without click waste
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2112017

Range of shower handsets (chromium plated) brass bodies and NBR O-rings. The inlets incorporate stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature 60ºC

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2112017
Size:
½” BSP (M)
Marking:
Dornbracht on front of body
Installation Requirements:
R001 R040
Expiry date:
31/12/2026
Model:
28019979 Hand shower (flow rate 15 l/min.) 28013979 Hand shower (flow rate 6,8 l/min.)
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2112061

Range of deck mounted, flow control valves (brass bodies), incorporating a quarter turn ceramic disc headwork with either a cross top or single lever operating member (see models). The products are supplied with a metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2112061
Size:
½” BSP (M)
Marking:
Dornbracht on edge of baseplate
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
20000882 – Single lever 20000883 – Single lever 20000892 – Cross-top
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2201004

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 33500626 and 33515626 models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201004
Size:
Stainless steel braided PEX lined flexible hoses assemblies with ⅜" captive nut end connections.
Marking:
Dornbracht logo on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2027
Model:
33500626, 33505626, 33515626, 33520626.
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2201012

Range of two-hole, single outlet, fixed combination tap assemblies (chrome plated brass), incorporating a single sequential cartridge headwork with a dome type operating member. The spout outlet is connected to the flow control valve via a stainless steel braided PEX lined flexible hose assembly. The spout inlet incorporates a plastic flow regulator, and the spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2201012
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ⅜” captive nut end connections.
Marking:
Dornbracht on spout
Installation Requirements:
R001 R006 R007 R009 R010
Expiry date:
31/01/2027
Model:
29217811, 29218811.
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 8 of 21

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.