TEST SITE

Dornbracht AG & Co. KG Approvals


#2212025

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlets incorporate a plastic aerator. A pop-up waste is also supplied. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2212025
Size:
Stainless steel braided, PEX lined flexible hose assembly with a 3/8" BSP captive nut.
Marking:
Dornbracht on the body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2027
Model:
33500882, 33513882.
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2303003

Hand shower sets consisting of a wall elbow with brass body (chrome plated), shower hose and handset. The inlet incorporates stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2303003
Size:
½” BSP (M).
Marking:
Dornbracht on handset body.
Installation Requirements:
R001 R040
Expiry date:
31/03/2028
Model:
27803831, 27803832.

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2303013

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout incorporates a plastic aerator. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2303013
Size:
Headwork: 35mm OD. Spout: ½” BSP (M).
Marking:
Dornbracht on spout.
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2028
Model:
36860662, 36861662, 36867662.

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2303027

Wall mounted tap assembly (chromium plated brass) incorporating a ¼ turn ceramic disc controlling the flow and a plastic aerator in the spout outlet. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2303027
Size:
½” BSP male.
Marking:
Dornbracht on body.
Installation Requirements:
R001 R040
Expiry date:
31/03/2028
Model:
Meta – 30010662.

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2303029

Range of three-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The product is supplied with stainless steel braided PEX lined flexible hose assemblies for installation between the side valves and the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap with a single outlet and a swivel spout.
WRAS Approval Number:
2303029
Size:
½” BSP (M).
Marking:
Dornbracht on body.
Installation Requirements:
R001 R006 R007 R010
Expiry date:
31/03/2028
Model:
20705882, 20705892.

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Kobbingser Muhle 6 Iserlohn
Postcode
D-58640
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 16 of 21

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.