'CHP-3-E'. Black coloured, injection moulded fluoroelastomeric material. Shore hardness 70. Tested in-radius size 3.95mm. For use with water up to 23°C.

Section:

5320 Rubbers

Section Subtitle:

General - material only. Components made from materials listed in this section may be required to be submitted for audit.

WRAS Approval Number:

2007515

Expiry date:

31/07/2025

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36, B-9810 Nazareth

View All Listings by this Company

Range of rigid ductile iron couplings (copper colored alkyd enamel) (Style 606-EN), Vic-flange adapter’s (Style 641-EN) and grooved copper fittings (No. 610, 611, 620, 625, 650 & 660 –EN) for use with grooved copper tubing (manufactured to EN 1057 R250). Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007027

Size:

See model

Marking:

Victaulic, size, model number and technical info on body and clamping rings.

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

Style 606-EN, Rigid Coupling for Copper: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. Style 641-EN, Copper flange Adapter: 54mm, 66.7mm, 76.1mm (4xM16), 76.1mm (8xM16), 108mm, 133mm & 159 mm. No. 610-EN, 90° Copper Elbow: 54mm, 66.7mm, 76.1mm, 108mm, 133m & 159 mm. No. 611-EN, 45° Copper Elbow: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. No. 620-EN, Copper Tee: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. No. 625-EN, Copper Reducing Tee: 66.7mm x 54mm, 76.1mm x 66.7mm, 108mm x 76.1mm & 159mm x 108mm. No. 650-EN, Copper Concentric Reducer: 66.7mm x 54mm, 76.1mm x 66.7mm, 108mm x 76.1mm, 133mm x 108mm, 159mm x 108mm & 159 x 133 mm. No. 660-EN, Copper End Cap: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm.

Product Images

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36, B-9810 Nazareth

View All Listings by this Company

Range of ‘StrengThin™’ 100 System couplings and fittings for use with stainless steel pipe (manufactured to EN 10217-7). For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206013

Size:

Please refer to model.

Marking:

Victaulic logo, model, size and technical information on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

StrengThin™ 100 System Couplings and Fittings comprising of models: No. E490, 90° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E491, 45° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E492, Tee: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E493, Reducing Tee: DN65 x DN65 x DN50; DN80 x DN80 x DN50, DN80 x DN80 x DN65, DN100 x DN100 x DN50 DN100 x DN100 x DN65, DN100 x DN100 x DN80, DN125 x DN125 x DN65, DN125 x DN125 x DN80, DN125 x DN125 x DN100, DN150 x DN150 x DN80, DN150 x DN150 x DN100, DN150 x DN150 x DN125, DN200 x DN200 x DN100, DN200 x DN200 x DN125, DN200 x DN200 x DN150; DN250 x DN250 x DN1250, DN250 x DN250 x DN150, DN250 x DN250 x DN200; DN300 x DN300 x DN150, DN250 x DN250 x DN200 & DN250 x DN250 x DN250. No. E494, & E494G Adaptor Nipple: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E495, Concentric Reducer: DN65xDN50, DN80xDN50, DN80xDN65, DN100xDN50, DN100xDN65, CN100xDN80, DN125xDN80, DN125xDN100, DN150xDN100, D150xDN125, DN200xDN125, DN200xDN150, DN250xDN150, DN250xDN200, DN300xDN200 & DN300xDN250. No. E496, End Cap: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Style E497, Rigid Coupling: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E498, Flange Adaptor: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300.

Product Images

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36, B-9810 Nazareth

View All Listings by this Company

Manufacturer:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36, B-9810 Nazareth

View All Listings by this Company

Range of ductile iron pipe couplings for use with stainless steel and carbon steel pipe. The carbon steel pipe must incorporate a suitable coating or lining for wholesome water use. For maximum working pressure and the type of pipe the fittings are for use with, please refer to model. For above and below ground use. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206015

Size:

Please refer to model.

Marking:

Victaulic size, model and product info on clamp

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Style W07, AGS Rigid Coupling for use with Sch10 Carbon Steel pipe: DN350, DN400, DN450, DN500, DN550 - maximum working pressure 25.0 bar. DN600 - maximum working pressure 16.0 bar. Style W77, AGS Flexible Coupling for with Sch10 Carbon Steel pipe: DN350, DN400, DN450, DN500, DN550 - maximum working pressure 25.0 bar. DN600 - maximum working pressure 16.0 bar. Style W89, AGS Rigid Coupling for use with 9.5mm carbon steel pipe: DN350, DN400, DN450, DN500, DN550, DN600 - maximum working pressure 20.68 bar. Style W89, AGS Rigid Coupling for use with Sch10S stainless steel pipe: DN350, DN400, DN450, DN500, DN550, DN600 - maximum working pressure 20.68 bar. Style W89, AGS Rigid Coupling for use with 3mm stainless steel pipe: DN350 - maximum working pressure 16.0 bar. Style W89, AGS Rigid Coupling for use with 4mm stainless steel pipe: DN350 - maximum working pressure 20.68 bar.

Product Images

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36, B-9810 Nazareth

View All Listings by this Company

'EW Gasket Material'. Black coloured EPDM gasket material which is injection moulded and then spliced. Shore hardness 65A. Initial tested in-radius size 3.9mm. In March 2023, the tested in-radius size was increased to 4.4mm. For use with water up to 23°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2211521

Expiry date:

30/11/2027

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36, B-9810 Nazareth

View All Listings by this Company

'Victaulic Lubricant'. Beige coloured lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

30/11/2027

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36, B-9810 Nazareth

View All Listings by this Company