Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with a solenoid valve controlling the flow and activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2006809

Size:

Stainless steel braided EPDM lined hose assembly with ½” captive nut end connections.

Marking:

Deva on front of body. DTC28 on rear of body.

Installation Requirements:

R001 R006 r010

Expiry date:

30/06/2025

Model:

SENSOR1/D, SENSOR2/D, SENSOR3/D

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assembles with brass bodies (various finishes), incorporating a non-rising spindle headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2005348

Size:

15mm copper tails

Marking:

DTC34 (Methven logo) on rear of body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/05/2025

Model:

Models with dome type operating members: DCM104 DCP124/004 DCP124/005 Models with cross top operating members: MILAN104 VW MILAN104 WM MILAN104

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company

Range of basin pillar taps (chromium plated brass or gold effect finish /501 model) with rising spindle headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener. The products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap.

WRAS Approval Number:

2005356

Size:

½” BSP (M).

Marking:

DTC 34 (brand of Methven) on rear of body.

Installation Requirements:

R001 R006

Expiry date:

31/05/2025

Model:

Coronation range - high neck sink taps: CR27A & CR27A/501.

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies, except for /501 suffix model which is gold plated), incorporating quarter turn ceramic disc headworks or a ceramic cartridge headwork (ELAN113 & DAR113 models only), all with single lever operating members, except GE04 models which have cross top operating members. The spout outlet incorporates a plastic flow straightener, except the DAR113 model which has a plastic aerator. The DLT113 models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2006810

Size:

DAR113 model: Stainless steel braided PEX lined flexible hose aseemblies incorporating ½” captive nut end connections. All other models: 15mm copper tails

Marking:

ELAN113 model: DTC34 (brand of Methven) on body. Deva logo on operating member. DAR113 model: DTC53 (brand of Methven) on body. All other models: DTC34 (brand of Methven) on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2025

Model:

GE04, GE04/501, ELAN113, DLT113, DLT113BW, VW DLT113, DAR113.

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company

Shower kit consisting of a shower handset (matt black or chrome plated plastic), riser rail and PVC lined multi-layered shower hose with brass connections, EPDM 'O'-rings and strainer. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2005908

Size:

1/2" BSP (F) conical or captive nut

Marking:

Methven on shower handset

Installation Requirements:

R001 R040

Expiry date:

31/05/2025

Model:

KMKIT & KMKITBK

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company