Single hole, single outlet (swivel) combination tap assembly, (Chrome plated) brass body incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull out spray. The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2204314

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Franke on operation member.

Installation Requirements:

R001 R010 R090

Expiry date:

30/04/2027

Model:

FUJI PULL OUT

Product Images

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004367

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression end connections.

Marking:

SMR on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2025

Model:

ZENO

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Manufacturer:

San Marco Rubinetteria Srl

Company Name

San Marco Rubinetteria Srl

Address

Via Carducci 10 13867 Pray Biellese (Biella)

Phone

+39 15765 5244

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (stainless steel body) incorporating a ceramic cartridge headwork with single lever type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307318

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Franke on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2028

Model:

115.0547.856 - Atlas neo swivel kitchen tap.

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Manufacturer:

Nokite EcoSmart Water Heating Systems (Guangdong) Co., Ltd.

Company Name

Nokite EcoSmart Water Heating Systems (Guangdong) Co., Ltd.

Address

38 South Shunde Avenue Ronggui Foshan Guangdong 528305

View All Listings by this Company

Range of single hole, single outlet (swivel), pull down, combination tap assemblies (chrome plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet is a handspray mechanism that incorporates a plastic aerator and a button to divert between the aerator and the spray function. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307355

Size:

Stainless-steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Franke on operating member.

Installation Requirements:

R001 R009 R010 R090

Expiry date:

31/07/2028

Model:

115.0638.868, 115.0626.087 & 115.0626.088

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company