Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. The cold water inlet tail incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2006312

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections. Cold inlet – ½” BSP (M)

Marking:

Carron Phoenix on operating member.

Installation Requirements:

R001 R006 r010

Expiry date:

30/06/2025

Model:

SAVOY

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The hot inlet incorporates an adaptor which is fitted with a single check valve cartridge however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2005340

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.

Marking:

Carron Phoenix (brand of Franke) on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/05/2025

Model:

Bali

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007384

Size:

Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections.

Marking:

FRANKE on rear of body

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2025

Model:

ATHENA

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Range of single hole, single outlet (swivel), combination tap assemblies (chromium plated brass). Incorporate a quarter turn ceramic disc headworks with single lever operating members (Models Cresta, Sion & Henley) or ceramic cartridge headworks with single lever operating members (model Reno). The inlets incoprorate approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110300

Size:

½” BSP (M)

Marking:

Sion: Franke logo on body Cresta: Franke logo on operating member Henley: Carron Phoneix on body Reno: Carron Phoneix on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2026

Model:

Cresta Henley Sion Reno

Product Images

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. The cold water inlet tail incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2006369

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections. Cold inlet – ½” BSP (M)

Marking:

Franke on operating member.

Installation Requirements:

R001 R006 r010

Expiry date:

30/06/2025

Model:

FUJI COMBINATION TAP ASSEMBLY

Product Images

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004365

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression end connections.

Marking:

SMR on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2025

Model:

Zeno Plus

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Manufacturer:

San Marco Rubinetteria Srl

Company Name

San Marco Rubinetteria Srl

Address

Via Carducci 10 13867 Pray Biellese (Biella)

Phone

+39 15765 5244

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The cold inlet hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110383

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections (hot), ½” BSP (M) (cold).

Marking:

Franke on tap body

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2026

Model:

BERN COMBINATION TAP ASSEMBLIES

Product Images

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic disc headworks with a single lever operating members. The spout outlet incorporates a plastic flow straightener or aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110384

Size:

Stainless steel braided EPDM lined flexible hose with ½” BSP captive nut end connections.

Marking:

Carron Pheonix (brand of Franke) on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2026

Model:

AZTEC KG1 & KM1 COMBINATION TAP ASSEMBLIES

Product Images

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic disc headworks with a single lever operating members.The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a double outlet and a swivel spout.

WRAS Approval Number:

2204302

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connection.

Marking:

Franke on body.

Installation Requirements:

R001 R006

Expiry date:

30/04/2027

Model:

ZURICH

Product Images

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2204306

Size:

Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Franke on body

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2027

Model:

EIGER DAVOS J

Product Images

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company