Range of plastic shower hoses (chrome effect finish) incorporating a PVC inner liner, with EPDM ‘O’-rings and/or washers. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2201069

Size:

½” BSP captive nuts

Marking:

Nabis on captive nut

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

A05054 NAB 2M PVC LINED SHOWER HOSES

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Range of pressure reducing valves with DZR brass bodies, integral stainless steel strainer, and EPDM ‘O’-rings and membrane. The oulet pressure is adjustable between 1.5 bar and 6.0 bar. Maximum inlet supply pressure 25.0 bar. Maximum operating temperature 70°C.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

2203316

Size:

see model

Marking:

Jet Range, WRAS, model & date of manufacture (YY/WW) on adhesive label on body. Flow arrow, size & DR on body

Installation Requirements:

R001 R120

Expiry date:

31/03/2027

Model:

K74297: 15mm compression. K74298: 22mm compression. K74299: 28mm compression. K74300: 1¼” BSP (M). Models added April 2022: K74301: 1 ½” BSP (M), K74302: 2” BSP (M).

Product Images

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Manufacturer:

Ademco 1 GmbH

Company Name

Ademco 1 GmbH

Address

Hardhofweg 40, 7481 Mosbach

View All Listings by this Company

Range of water meters with blue epoxy coated iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1505 Water Meters

Size:

see model

Marking:

JET, Wolseley & Company details, WRAS approved and other technical information on dial.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

171260 & 171280 – DN50 171261 & 171281 – DN65 171262 & 171282 – DN80 171263 & 171283 – DN100 171264 & 171284 – DN125 171265 & 171285 – DN150 171266 & 171286 – DN200

Product Images

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies, incorporating brass bodies (various finishes). Model A05406 has a non-rising spindle headwork with cross top operating members. All other models have a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2204085

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connection.

Marking:

Nabis on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2027

Model:

A05414, A05425, A05426, A05408, A05409, A05401, A05406 & A05433 combination tap assemblies

Product Images

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies, incorporating brass bodies (various finishes), ceramic cartridge headwork with a single lever operating member and waterfall spout outlet. The waterfall spout outlets of models A05421, A05422 & A05418 incorporate a stainless-steel mesh. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2204086

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connection.

Marking:

Nabis on body.

Installation Requirements:

R001 R006 R160

Expiry date:

30/04/2027

Model:

A05415, A05421, A05422 & A05418 combination tap assemblies

Product Images

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company