TEST SITE

Thomas Dudley Limited Approvals


#2109914

WC cable operated dual flush drop valves with ABS bodies and silicone seals. The valves incorporate an internal overflow and are operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2109914
Size:
1½” or 2” BSP outlet.
Marking:
Dudley Water Saving Solutions on top of valve.
Installation Requirements:
R001 R571
Expiry date:
30/09/2026
Model:
Victoria
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN

View All Listings by this Company

Print This Approval


#2110328

Range of urinal flushing mechanisms with a solenoid valve controlling the flow. The valves are controlled via an infra-red sensor. The inlet incorporates a stainless steel strainer and flow regulator. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1307 Flushing Mechanisms
Section Subtitle:
Urinals.
WRAS Approval Number:
2110328
Size:
15mm compression
Marking:
Kinetic & Dudley on control unit. Kinetic, Dudley, model No, address, contact details & other tech info on adhesive lebel on control unit rear. Filter side & flow arrow on body.
Installation Requirements:
R001 R075 R120
Expiry date:
31/10/2026
Model:
PSPKIN327877 PSPKIN327878
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN

View All Listings by this Company

Print This Approval


#2202900

Dudley S9 dual flush syphonic flushing apparatus with a polypropylene body and stainless steel link for use with WC flushing cisterns.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2202900
Size:
1½” Outlet, Syphon heights 7½” to 12”.
Marking:
DUDLEY HI-FLO S9B SYPHON on top of valve body.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
S9 Syphon

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN

View All Listings by this Company

Print This Approval


#2202902

Turbo S1-11 Dual Flush syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2202902
Size:
1½” Outlet, Syphon heights 8” to 12”.
Marking:
DUDLEY TURBO 11 2-PART SYPHON on top of valve body.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
S1-11 Syphon

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN

View All Listings by this Company

Print This Approval


#2207081

Latching solenoid valves with a plastic body and an EPDM diaphragm. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2207081
Size:
½” BSP (M) inlet/outlet.
Marking:
Stern, date of manufacture (WW/YY) on adhesive label on body. Stern Logo and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/07/2027
Model:
Electroflo latching solenoid valve

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.