Range of brass bodied automatic air venting valves incorporating a plasitc float. The FIG 776 models are supplied with an isolation valve, comprising of a brass body with a plastic plunger, spring, NBR ‘O’-ring and PTFE seal. The plunger is pushed open when the air venting valve is attached and the spring closes it when the air venting valve is removed. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

2007380

Size:

See model.

Marking:

Officine Rigamonti spa logo (‘OR’), PN, tempature, Valmat (tradename of Officine Rigamonti spa) and Made in Italy on body.

Installation Requirements:

R001 R200

Expiry date:

31/07/2025

Model:

RANGE OF AUTOMATIC AIR VENTING VALVES: FIG 775: 3/8” BSP (M). FIG 775: ½” BSP (M). FIG 775: ¾” BSP (M). FIG 775: 1” BSP (M). FIG 776: ½” BSP (M).

Approval Holder:

Hattersley

Company Name

Hattersley

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

View All Listings by this Company

Manufacturer:

Officine Rigamonti Spa

Company Name

Officine Rigamonti Spa

Address

Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)

Phone

+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company

Range of DZR brass metering stations supplied with red and blue test points for upstream and downstream port identification. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Size:

See model.

Marking:

Hattersley logo (HNH), model number, flow arrow, PN and size on body. Hattersley logo (HNH), maximum temperature and WRAS temperature on tags attached to ports.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Fig 1000, Fig 1000 (Low Flow) & Fig 1000M (Medium Flow): Inlet: ½” screwed ISO 228 parallel BSPP (F). Outlet: ½” taper threaded to BS EN 10266-2 BSPT (M). Fig 1000: Inlet: ¾”, 1”, 1¼”, 1½” or 2” taper threaded BS EN 10226-2 BSPT (F). Outlet: ¾”, 1”, 1¼”, 1½” or 2” taper threaded BS EN 10226-2 BSPT (M).

Approval Holder:

Hattersley

Company Name

Hattersley

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

View All Listings by this Company

Range of drain off taps incorporating DZR brass bodies, non-rising spindle operating mechanism and EPDM ‘O’-rings and seat washer. FIG 371 range incorporates a lockshield mechanism and the FIG 370 range incorporates a key operated mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1770 Valves

Section Subtitle:

Draining - For above ground use only.

WRAS Approval Number:

2011084

Size:

½”, ¾” or 1” BSP (M)

Marking:

Hattersley logo, size and CR on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

Hattersley FIG 371 & FIG 370 DRAINING TAPS

Approval Holder:

Hattersley

Company Name

Hattersley

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

View All Listings by this Company

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body, compression models are nickle plated. A drain port is provided between the cartridges. Compression models are to be used with copper pipe to EN1057. Maximum working pressure 16.0 Bar. Maximum operating temperature for the Hattersley Fig 250W range 85°C. Maximum operating temperature of the Hattersley Fig 250CW is 60°C

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

2012364

Size:

Hattersley Fig 250W– DN15, DN20, DN25, DN32, DN40, DN50. Hattersley Fig 250CW – 15mm, 22mm, 28mm compression.

Marking:

Hattersley Logo, flow arrow, PN, DN and CR mould on body

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Hattersley Fig 250W & 250CW double check valve assemblies

Approval Holder:

Hattersley

Company Name

Hattersley

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

View All Listings by this Company

Range of DZR brass gate valves incorporating brass wedges. The Fig 30 range incorporates hand wheel operating members. The Fig 30LS range incorporates a lock shield operating member. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2105700

Size:

½” up to 2” BSPT (BS EN 10226 (ISO 7-1)) (F)

Marking:

HNH (Hattersley logo), size, pressure, CR and made in Italy on body. Hattersley and product information on handwheel model data plate

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

Hattersley Fig 30 and Fig 30LS.

Approval Holder:

Hattersley

Company Name

Hattersley

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

View All Listings by this Company